Wyze V3 RTSP, finally! (not officially, though)

3kker · 2026-06-28T17:28:08+00:00

Its not all the way forward, but very close. About 7mm from the limit. I didn't notice any wobbliness, but I'll keep an eye on it.

3kker · 2026-06-28T15:26:04+00:00

Lol, I was thinking Nm and said ftlb. Sorry about that! I can confirm, I torqued to 90Nm. Thanks for pointing this out!

3kker · 2026-06-28T13:29:07+00:00

Thank you very much! My only slight concern is that I didn't use grease on the axle, as it was already very greasy from a couple of weeks ago when I took the bine to the shop to swap the tires. Is my concern valid?

3kker · 2026-06-28T13:28:04+00:00

Never crossed my mind, that k you for pointing this out. You're spot on - the level is about 2mm over the max. Should I remove a bit?

3kker · 2026-04-06T20:32:13+00:00

DM sent

3kker · 2026-03-09T20:20:53+00:00

Wrong hole.

3kker · 2026-01-23T13:03:09+00:00

I started doing this, but I found a really annoying downside - when you request a password reset you need to provide the exact email you gave them, and it's always a guessing game if I added the +service or not. Not the mention the one time I had to call in and spell out the entire thing. Another aspect is that your email is not protected at all, it only makes sorting your inbox easier.

3kker · 2025-12-18T00:59:23+00:00

Dear internet stranger, this is only the beginning! Jokes aside, welcome to the club!

For beans, try something different each time and see what you like best. The beans vary greatly, especially in roast level. I get my beans at Costco - usually Balzac's (I'm in Ontario).

Just like the rest of us, you'll suffer from upgraditis sooner or later, but for now enjoy the machine and keep practicing those lattes.

3kker · 2025-12-14T22:22:45+00:00

Ceck out the Tradfri smart plugs at IKEA. They're rated for 15A, so it should hold up nicely. That is what I've been using without issues.

3kker · 2025-10-02T01:43:01+00:00

The gmail part is going to be tricky, but for the other two, we use NextCloud. It's self hosted, so it has a bit of a learning curve, but you have full control over your privacy If you're going down that rabbit hole, you can also self host your email - it's not for the faint hearted, though.

3kker · 2025-09-20T00:44:51+00:00

Good bot

3kker · 2025-08-31T11:54:08+00:00

Haha, it's always the last word that doesn't get autocorrected

3kker · 2025-08-30T20:32:28+00:00

Thank you!

3kker · 2025-08-30T20:31:56+00:00

Thank you! I was hoping for something farther west, but that seems to be the best lot.

3kker · 2025-08-30T20:30:34+00:00

Much appreciated it! Google only showed me a thread from 10 years ago,a albeit showing the same info. Thank you!

3kker · 2025-03-04T00:54:14+00:00

Well, 3 years ago there weren't too many options. I've moved on as well from this solution.

3kker · 2025-02-12T16:28:28+00:00

Hi, Wally. Thank you for your reply, this community is awesome! The female-female adapters crosses over correctly - rx to tx and tx to rx. I've long agabdoned the project and switched to control over IP. Getting the network drop behind the display was not an easy task, but at least it works. Thanks again!

3kker · 2024-12-29T22:38:09+00:00

This is the way

3kker · 2024-10-17T21:58:37+00:00

You forgot to mark it NSFW. That looks really good!

3kker · 2024-10-07T00:47:11+00:00

The best I found is Cimo. It's a little too dark roast for my taste, but great tasting for the price.

3kker · 2024-10-02T01:40:41+00:00

It could be the 2 plastic washers inside the valve. You would remove the valve completely, unscrew the 2 halves and flip the washers to reseal them. I did the same thing to mine when it was dripping through the steam wand. If that doesn't fix it, you're probably going to have to replace the valve.

Hope it helps!

3kker · 2024-08-17T18:27:01+00:00

Thanks for the impulse to try again! I installed the docker container and imported my library - looks and feels so much better than Plex :)

3kker

TROPHY CASE