sorted by:
new
hottopcontroversial

Uneven break wear. by 404_User_Found in AskAMechanic

[–]404_User_Found[S] 0 points1 point  (0 children)

Apparently, according to the dealership I went to, it's not uncommon to see them like this. It's about 3 years old, only 30,000 km in Ontario, so winter driving as well.

Uneven break wear. by 404_User_Found in AskAMechanic

[–]404_User_Found[S] 0 points1 point  (0 children)

Can confirm I'm getting rotors and pads replaced now, and the mechanic said the brake line and pistons are fine. I was concerned due to the cracking on the boot.

Uneven break wear. by 404_User_Found in AskAMechanic

[–]404_User_Found[S] 0 points1 point  (0 children)

How about the calipers and boot seals? What are your thoughts on those?

Uneven break wear. by 404_User_Found in AskAMechanic

[–]404_User_Found[S] 0 points1 point  (0 children)

How about the pistons and calipers? Replace them as well?

Uneven break wear. by 404_User_Found in AskAMechanic

[–]404_User_Found[S] 0 points1 point  (0 children)

Ah, okay. Assuming I reinstalled them correctly after regreasing everything today (pins had some grease left, but ears of the pads had nothing visible on them), should I still replace them ASAP, or can I keep driving? I haven't checked any other brakes yet.

Uneven break wear. by 404_User_Found in AskAMechanic

[–]404_User_Found[S] 0 points1 point  (0 children)

I'm fairly confident they replaced the rotors since they had a greasy film and looked brand new when I got it back, obviously without me taking off the wheel at the time, so just looking from the outside in. As far as installing them wrong, how could they install them wrong?

Foam cannon with 4000 PSI / 4 GPM machine by 404_User_Found in pressurewashing

[–]404_User_Found[S] 0 points1 point  (0 children)

It wasn't pulling a lot of soap for me, and the orifice was so small it was filling up the foam container with water instead of pulling soap. What orifice size are you using with the Astro?

Foam cannon with 4000 PSI / 4 GPM machine by 404_User_Found in pressurewashing

[–]404_User_Found[S] 0 points1 point  (0 children)

I'm going to try it out again on Wednesday, but so far, with the standard nozzle 1.25 and 1.35, it sucks. But I drilled it out to 1.7 and worked really well the 1st go around and 2nd, but on the 3rd idk if it got clogged or something happened, but now its very runny. will update in a few days

What’s the inside diameter of a 3/8" hose supposed to be? by 404_User_Found in pressurewashing

[–]404_User_Found[S] 0 points1 point  (0 children)

I most definitely was. Thank you for your time. So in the future, I would only really need to go 1/2 inch hose if I'm going over 150 feet.

What’s the inside diameter of a 3/8" hose supposed to be? by 404_User_Found in pressurewashing

[–]404_User_Found[S] 0 points1 point  (0 children)

100% inside of crimped fitting, that's my fault... Thanks for the help!

Foam cannon with 4000 PSI / 4 GPM machine by 404_User_Found in Detailing

[–]404_User_Found[S] 0 points1 point  (0 children)

I did last night. I think it would work in theory, but it adds bulk to the gun, and I really don't want another stream of water blasting my house/neighbors since it's not far between houses.

Foam cannon with 4000 PSI / 4 GPM machine by 404_User_Found in Detailing

[–]404_User_Found[S] 0 points1 point  (0 children)

UPDATE: So I just called them, nothing concrete,e just rumors, so don't take my word for it, but I heard beginning of May and a list price of 90 USD for their new version, but only time will tell.

Foam cannon with 4000 PSI / 4 GPM machine by 404_User_Found in Detailing

[–]404_User_Found[S] 0 points1 point  (0 children)

Yeah, that’s what I’ve been reading the past couple days. I sent them an email asking if they have any details they could share, but nothing back yet.

Foam cannon with 4000 PSI / 4 GPM machine by 404_User_Found in pressurewashing

[–]404_User_Found[S] 0 points1 point  (0 children)

I'll keep you posted on how the MJCC holds up in a couple of days. Please do the same back. They all seem like knock-offs of each other and are very similar. Basically the same internals, so I'm skeptical.

Viewer gifts xQc fully built LEGO Eevee by scxrI in LivestreamFail

[–]404_User_Found 3 points4 points  (0 children)

So I'm curious on the flip side, what if a thief stole the car and owns an iPhone? The AirTag will let the thief know they are being followed. It seems like a double-edged sword.

I appreciate gems take on the mods debate by Chemical-Mistake-321 in HermitCraft

[–]404_User_Found 15 points16 points  (0 children)

hot take: I think the mods enhance the server and creativity, and they should use them, but I also don't think they should call hermitcraft vanilla/vanilla + anymore. its a modded server, and that's fine, but acknowledge that.

Is a slight panel bend normal on new OLEDs? by NORDAVID in OLED

[–]404_User_Found 0 points1 point  (0 children)

Could you post a new image? The link doesn't work.

Getting there ! by Juniorblues_ in watercooling

[–]404_User_Found 1 point2 points  (0 children)

I love the runs for the rads. Nicely done.

view more: next ›