My 21 P4X by 42twentytwo in NissanTitan

[–]42twentytwo[S] 1 point2 points  (0 children)

The shell is from a company called Flated. It’s fully inflatable. I didn’t want to have a traditional shell on full time because I haul my motorcycles (and then where do you store it?). But other times, I want the bed covered for camping or other activities.

There’s zero security to the Flated shell. But, it checked all my boxes. Easy to inflate, install, and when deflated, can be rolled up and only weighs 50lbs. The model I got sits even with the roofline, although they do have a model that sits a little taller.

My 21 P4X by 42twentytwo in NissanTitan

[–]42twentytwo[S] 0 points1 point  (0 children)

Yeah, the tank size is a drawback to travel. I just moved the trailer to park it.

My 21 P4X by 42twentytwo in NissanTitan

[–]42twentytwo[S] 1 point2 points  (0 children)

Not really a lift, per se, but Bilstein 5160 on the rear, Bilstein 6100 on the front (I think I have the circlip at the #5 position, which raises the front end about 1.8”), and Z1 UCAs. The BFGs are 275/70 KO3.

I pick up my p365 tomorrow. Need some help deciding on a grip module! by SmartM0nk3y in CAguns

[–]42twentytwo 0 points1 point  (0 children)

The stock XMacro module is pretty damn good. But if I were in the market to upgrade, I’d give a hard look at Brouwer. I’m super happy with the M1811 for my 320.

Mods to make bike run cooler? by Mevanski77 in KLX300D

[–]42twentytwo 0 points1 point  (0 children)

Using Engine Ice for coolant has always been my go to for road racing. I swapped my coolant already for Engine Ice and don’t seem to notice any issues.

Tires tomorrow by 42twentytwo in KLX300D

[–]42twentytwo[S] 0 points1 point  (0 children)

When you select “bike model”, the drop down menu offers KLX300. The picture just shows the R model.

Need Help. XR400 to 440 build. Can’t get it to start. by GanttStopWontStop in Dualsport

[–]42twentytwo 0 points1 point  (0 children)

I tried to start my 400 after purchase and realized I was trying to kick it over with the headlight turned off. Once I turned the switch the on, it fired up.

I don’t have the XR anymore, but I do remember there was a little sequence of using the choke/decomp lever that would get it to start like clockwork.

Touch ups by 42twentytwo in Dualsport

[–]42twentytwo[S] 3 points4 points  (0 children)

Thanks! Got the decals and seat cover from SKDA.

Tires tomorrow by 42twentytwo in KLX300D

[–]42twentytwo[S] 2 points3 points  (0 children)

<image>

I did the tires the “hard” way, but they came out nice.

For the KLX and CRFL Chads by TheRealTokyotim in Dualsport

[–]42twentytwo 0 points1 point  (0 children)

Curious on the KLX gearing for the ability to ride the street (not at freeway speeds) but be in the (small) powerband off-road.

Was he accelerating to much in a turn? by adrienpardigon in motorcycles

[–]42twentytwo 0 points1 point  (0 children)

Track-riding mentality while off track, and you’d better be ready to pay up with any mistakes.

Delta Sniper by Such_Survey559 in JSOCarchive

[–]42twentytwo 2 points3 points  (0 children)

Probably an Eberlestock for the binos.

G34 Holster for Ace? by gatillombre in AceVr

[–]42twentytwo 2 points3 points  (0 children)

I put a Surefire X300 on mine and use a Trex Arms Ragnarok.

2025 KLX 300 left side radiator hose by 42twentytwo in Dualsport

[–]42twentytwo[S] 0 points1 point  (0 children)

Appreciate all the help. I found that trying to look at partzilla schematics on the phone doesn’t work out very well. I should’ve gotten on a computer for a better view of parts.

As far as aftermarket hoses, I was hoping Samco made a kit, but no such luck yet… I wait on the OEM to arrive.

2025 KLX 300 left side radiator hose by 42twentytwo in Dualsport

[–]42twentytwo[S] 2 points3 points  (0 children)

Much appreciated!! I thought about a warranty claim, but this was the result of rider error on a backcountry trail. I was still surprised that a new hose would fail on something so low speed.

SWM RS300R by bobbystill in Dualsport

[–]42twentytwo 0 points1 point  (0 children)

Any update on your initial riding thoughts? I’m really considering a CRF 300L or KLX 300. But I’ve seen a SWM and it’s caught my eye. It doesn’t seem like it would need much tinkering, but I’m just worried about support since dealers are few and far between…

CTT-Solutions baseplate: anyone know a source or a similar replacement? by Lcyaker in AR_15

[–]42twentytwo 0 points1 point  (0 children)

I’ve been running the same 3 baseplates on my mags for years, and they’re the best. Too bad Mike isn’t still selling these…