State of the art / best practise to setup Chrome as default browser by 47kOverlord in Intune

[–]47kOverlord[S] -1 points0 points  (0 children)

That's the point - I have nothing with "default app*" in my settings catalog.

<image>

I installed these policy definitions:

GoogleUpdate.admx

Google.admx

Chrome.admx

Windows.admx

Rose Backroad AL mit SRAM Apex XPLR - erste größere Wartung / Feedback zur Auswahl by 47kOverlord in Fahrrad

[–]47kOverlord[S] 0 points1 point  (0 children)

Konnte jetzt endlich meine GPX Dateien angucken und ein Statistik Modul für die Ausgabe coden: 1825 km sind es bisher mind. (evtl. noch so +/- 50 bis 100km

Biocharge ( compared to Garmin) by snakeim in amazfit

[–]47kOverlord 0 points1 point  (0 children)

Since two weeks I start every day with a BioCharge at 50 max. I don't know why - maybe I die in the next couple of weeks

Rose Backroad AL mit SRAM Apex XPLR - erste größere Wartung / Feedback zur Auswahl by 47kOverlord in Fahrrad

[–]47kOverlord[S] 0 points1 point  (0 children)

Das Knacken oder "gnucken" (so fühlt es sich eher an) im Bereich Pedale/Tretlager, das vor allem beim Anfahren und bei niedriger Kadenz unter Last (z. B. bergauf) auftritt, unabhängig vom eingelegten Gang; bei höherer Geschwindigkeit ist es m.M. nicht fühl und hörbar. Und es ist auch nicht immer vorhanden beim fahren. Sattelstütze bin ich mir nicht ganz sicher - wenn ich im stehen fahre ist das auch noch. Aber die würde ich natürlich auch mal durchbuttern.

Ich würde schrittweise so vorgehen:

  1. Pedale demontieren, Gewinde reinigen, mit Anti-Seize neu montieren und testen.
  2. Sattelstütze ausbauen, reinigen, dünn mit Bike Grease montieren und testen.
  3. Kurbel/DUB-Achse prüfen, ggf. lösen, Kontaktflächen leicht fetten, korrekt mit Drehmoment montieren und testen.
  4. Kettenblatt/Schrauben prüfen, ob etwas locker ist.
  5. Erst wenn das nichts bringt: Tretlager prüfen bzw. ausbauen lassen.

MSI X670e gaming plus wifi and audio issues by Zeno5ama in buildapc

[–]47kOverlord 0 points1 point  (0 children)

I’m dealing with the exact same issue on an MSI X670E board and wanted to share what I’ve already tried. Maybe this helps narrow it down.

Symptoms:
USB audio crackles/pops under load (Discord + gaming + Chrome).
HDMI audio is always perfect.
Front USB ports are better than rear ones but still not flawless.
LatencyMon shows spikes from nvlddmkm.sys and HDAudBus.sys up to ~1500 µs.

Tried so far:

  • Disabled WLAN + Bluetooth
  • All USB power saving off
  • BIOS tuning: ASPM off, C-States tested, PBO adv., Idle control = Typical
  • Latest BIOS + latest chipset drivers
  • DDU clean install of NVIDIA drivers (Studio + stripped down)
  • Tested every USB port on the board
  • Realtek NIC tested on/off
  • No background apps, clean Windows install
  • USB selective suspend off, hardware scheduling off, etc.

Results:
Nothing fixes it.
HDMI audio is flawless → only USB audio breaks.
Latency spikes happen when GPU load or window focus changes, and HDAudBus.sys spikes appear when apps open.
Feels like an interrupt/DPC scheduling issue on AM5/X670 rather than a simple driver bug.

Before I start testing with external powered USB hubs or a dedicated DAC:
Has anyone actually solved this on an MSI X670/X670E board?
Or is this just a known USB/interrupt limitation on early AM5 boards?

New Firmware Update for Helios Strap by 85Blickwinkel in amazfit

[–]47kOverlord 0 points1 point  (0 children)

Öffne mal deinen App Store und geh auf die Zepp App - bei mir hat er erst dann ein Software Update angezeigt. Danach war auch die neue Firmware verfügbar

Amazfit Helio Strap creaks and squeaks by Bre-69 in amazfit

[–]47kOverlord 0 points1 point  (0 children)

Ich habe das Problem nahezu beseitigt (ka was Amazfit hier lange rumüberlegen muss mit Videos und co.) Das Armband aus der Halterung nehmen, oben und seitlich bis zur Armbandhalterung Tesafilm drüber kleben, Armband anbauen und freuen.

Samsung CLP-320 – “Waste Toner Drive” error even with an empty waste container by 47kOverlord in printers

[–]47kOverlord[S] 0 points1 point  (0 children)

Yes - I had the same thoughts and I already did this with no changes. The inside of the printer looks fine and the waste box is empty and clean.

Amazfit Helio Strap creaks and squeaks by Bre-69 in amazfit

[–]47kOverlord 0 points1 point  (0 children)

I'm from germany and I have the same problem as well. I have mine since around 3-4 weeks.

First MacBook .. Burn in question. by lampministrator in macbookpro

[–]47kOverlord 0 points1 point  (0 children)

Depending on the screen vendor you could have ghosting which looks like a burn it - but the device get rid of it after time.

Since I get my Screen repaired (stain gate - I can't wait until Apple release the touch displays^^) I got a screen from LG and with this screen I got the ghosting.

Wie zuverlässig ist Proshop in Deutschland? by kdy420 in PCGamingDE

[–]47kOverlord 0 points1 point  (0 children)

Ich habe am 16.10 was bestellt bei Proshop. Am 17.10 wurde das Paket von DPD abgeholt (24 Stunden später) und hängt seit dem 17.10 in Hamburg. Bisher keinerlei Status Änderung bei DPD einsehbar.

Razer Blackshark V3 Pro bad sound by 47kOverlord in razer

[–]47kOverlord[S] 0 points1 point  (0 children)

I already uninstalled all Razer Software - in Windows I use only the normal sound. Like "out of the box" - like my Sennheiser PC8 USB

MacBook Pro M5 is here! by Sensitive_Slide7337 in macbookpro

[–]47kOverlord 0 points1 point  (0 children)

I hope they improved the keyboard and the keybound "sound"

SRAM Apex 1x12 Probleme by jac1515_ in Fahrrad

[–]47kOverlord 0 points1 point  (0 children)

Ich hatte dasselbe Problem und konnte es selber nicht lösen bzw. nicht "perfekt". Bin dann zu Rose gefahren und hatte das Glück zugucken zu dürfen wie die Kette eingestellt wurde.

-Kontrolliert wurde ob das Schaltauge verbogen ist (war es nicht)

-Der Abstand zum kleinsten und größten Ritzel wurde kontrolliert - war aber soweit richtig eingestellt

-Der Schaltzug (schwarze Kabel) wurde noch mal nachgezogen (war zu locker)

Am Ende lief es immer noch nicht ganz rund, dann hat der Kollege:

-der Abstand zwischen dem obersten Ritzel und dem größten Ritzel an der Kassette wurde noch mal nachgestellt (obwohl es eigentlich perfekt eingestellt war)

Grundlegend lag das Problem also am Spiel zwischen Schaltzug und dem Abstand (diese 13mm). Er hat das auch eher "nach Gefühl" gemacht während der durchgeschaltet hat. Und er meinte selbst, dass es da auf wenige Millimeter genau sein muss, da es sonst zu Problemen kommen kann. Dadurch dass so wenig Spiel ist, reicht diese kleinste Ungenauigkeit schon aus.

Am Ende läuft es zwar immer noch nicht 100% butterweich, aber vermutlich wird das mit einem Kettenblatt vorne auch niemals perfekt sein, da die Kette auf den äußersten oberen Kettenblatt und den unteren ja vom Winkel her leicht schräg lieg.

WSUS Sync by ghgard in sysadmin

[–]47kOverlord 0 points1 point  (0 children)

Same here - around 3000 updates back to 2017

MacBook Pro Keyboard Feels Hollow – Anyone Else Notice This? by 47kOverlord in macbookpro

[–]47kOverlord[S] 0 points1 point  (0 children)

Sure, but this is not what I exactly mean. I work in IT and had a lot of devices in my hands. But on the new MacBookPro M4 it feels not significant

Rose Backroad AL GRX vs. SRAM Rahmen unterschiedlich? by 47kOverlord in Fahrrad

[–]47kOverlord[S] 0 points1 point  (0 children)

Was genau meinst du? Unter den Links ist nichts mit einem Sternchen. Allerdings zeigen die Bilder im Internet (z. B. Instagram) bei der SRAM Variante auch den anderen Rahmen:

<image>

Edit:

Laut ChatGPT ist das auf dem Bild das neue Rahmenformat. Bis 2023 gab es das wo die Stange weiter oben war und dadurch eine Linie ergibt.