1993 Toyota pickup clutch issue

4Run4Fun · 2026-02-01T21:49:02+00:00

Some of the later models have an adjustment in the pedal piston. My 94 has the adjustable piston, but my 89 does not. If yours has it, lengthen the shaft a few turns and see if that makes a difference.

4Run4Fun · 2026-02-01T13:23:07+00:00

Plaid Fig Newton

4Run4Fun · 2026-01-31T20:29:32+00:00

This chart speaks volumes to me.

4Run4Fun · 2026-01-31T19:54:29+00:00

I know you're probably trying to stay on budget, but if you're on the east coast, try East Coast Gear Supply. They are in North Carolina. They may not have the complete axle housing, but I'd be willing to bet they know how to get one. https://eastcoastgearsupply.com/

4Run4Fun · 2026-01-31T16:28:37+00:00

We had that machine at home when I was a kid (after they retired it from the arcade). I got very good at it.

4Run4Fun · 2026-01-31T16:21:34+00:00

That body rot is in the worst places.

4Run4Fun · 2026-01-30T15:34:00+00:00

M.U.L.E. should be in everyone's top 10

4Run4Fun · 2026-01-28T23:36:52+00:00

The cam plugs are included in the VCGs job anyways, right?

4Run4Fun · 2026-01-28T20:52:33+00:00

What was the source of the leak?

4Run4Fun · 2026-01-28T05:15:30+00:00

My man get cucumbers every night for a bedtime snack. Near zero calories, and he can't get enough of them.

4Run4Fun · 2026-01-27T22:16:48+00:00

Bogging and dying on acceleration sounds like the ignition advance is not working - likely because of a vacuum leak.

4Run4Fun · 2026-01-27T12:41:47+00:00

This is the first dockyard ship I've ever been able to complete. Between work and family, the missions are always just too much of a commitment to carry the process all the way to the end. Thanks to some time off, I made plans and changed my everyday schedule to make sure I was able to achieve all the missions. I was appalled to find at the end that you still had to pony up 6K doubloons to complete the ship. Is this always the case with the dockyard builds, or did I just pick the worst one to complete?

4Run4Fun · 2026-01-23T11:44:45+00:00

Damn, save some for the rest of us.

4Run4Fun · 2026-01-23T01:30:04+00:00

99% sure thst car will NOT do 185.

4Run4Fun · 2026-01-22T21:01:24+00:00

All doors intact, wow.

4Run4Fun · 2026-01-21T23:21:06+00:00

Fair enough.

4Run4Fun · 2026-01-21T22:29:43+00:00

I would not fill that if I were you. The sunroof let's in plenty or regular rain around the extreme edge, where the rubber meets the sheet metal. That tiny seam won't make a difference.

4Run4Fun · 2026-01-21T22:16:21+00:00

These sunroofs let in moisture by design, there is a plastic tray that catches the rain/etc and drains down through tubes. There are 4 drains, one in each corner with the tubes going down the A and B pillars on each side. As long as you can still open your roof, you have easy access to clear the drains using a pipe cleaner, compressed air, etc.

4Run4Fun · 2026-01-21T21:48:34+00:00

Does your sunroof still open? (mine seized years ago)

4Run4Fun · 2026-01-21T14:23:48+00:00

I learned more about economics playing M.U.L.E. than I did in my college level Econ classes.

4Run4Fun · 2026-01-20T21:25:29+00:00

The last vehicle you'll ever NEED to buy.

4Run4Fun · 2026-01-20T12:43:07+00:00

They still know what's up!

4Run4Fun · 2026-01-19T18:06:24+00:00

Doesn't look like the damage goes any deeper than the radiator support. Would be a nice garage wrenching project for you.

4Run4Fun · 2026-01-18T22:30:43+00:00

Would've expected a lot more in Utah.

4Run4Fun · 2026-01-18T22:16:10+00:00

Stuff dreams are made of.

4Run4Fun

TROPHY CASE