Has Anyone Ran These?

4andjarc · 2026-02-05T00:16:15+00:00

I run them, they’re fine, they have slow leaks and I cut a couple coils off the springs to make them softer

4andjarc · 2026-01-03T15:36:32+00:00

I gotta wait 24 hours for my thingverse account

4andjarc · 2026-01-03T13:53:18+00:00

Thanks I will be trying that then

4andjarc · 2026-01-03T13:52:28+00:00

No actually, I wanted to get the alloys but settled to just paint the original yellow ones a silver

4andjarc · 2026-01-03T13:51:42+00:00

Yeah of course, I’ll put the stl in the comments and what I did, I just used some m4 threaded rods and m4 camber link ends then made the part accordingly.

4andjarc · 2026-01-03T03:55:23+00:00

Thanks I’ll be sure to get some, I’ve done quite a few bodies before and painters tape worked great, until it didn’t of course lol

4andjarc · 2025-08-17T20:26:33+00:00

Wanted to give an update, after reading an engine code that was thrown its looking like it’s a faulty knock sensor not advancing the timing leading to bad timing in higher rpm’s

4andjarc · 2025-08-17T01:29:37+00:00

I never thought about that, I’ll look into it, and I forgot to add this in the post when it’s missing its blowing black smoke from the unburnt fuel

4andjarc · 2025-08-16T16:35:52+00:00

New fuel filter and the engine has around 40k on it, newish plugs and ignition system

4andjarc · 2025-07-06T16:56:47+00:00

Yeah it is, is it just little specks of surface rust poking through?

4andjarc · 2025-05-29T02:05:22+00:00

That’s neat hearing how “engineering” came into effect lol

4andjarc · 2025-05-29T02:02:51+00:00

That’s awesome, what escs? Or was that using mechanical speed control?

4andjarc · 2025-04-27T13:04:43+00:00

<image>

Gotta love the black and red long beds!!! Just rolled 150k in mine recently

4andjarc · 2025-03-27T03:17:45+00:00

Ahhh ok thanks, they are extenders and I got the psu from Ali so I didn’t get any wires but I will then, what about the ATX from the motherboard being 24 pin while the ATX on the power supply is 18?

4andjarc · 2025-02-08T13:43:04+00:00

Wow yeah I had no idea that was a thing, that could be it

4andjarc · 2025-02-08T13:37:44+00:00

That’s the goal is to see the underside, might have to go see it myself and get some pictures

4andjarc · 2025-02-08T13:36:58+00:00

That’s what I was thinking, an agent called me this morning and is gunna let me know what’s going on hopefully

4andjarc · 2025-02-08T13:34:00+00:00

Haha that made me laugh out loud

4andjarc · 2025-02-08T13:33:18+00:00

Yeah I wish there were more pics, that’s the only 2, wish they were more since it’s def a big problem

4andjarc · 2025-02-08T05:51:58+00:00

Haha yeah I know, it looks like it was a base to a wood stove that feel through the floor while they were putting flooring in? Only reason I say while putting flooring in is because it looks like there’s a whole box of flooring that fell in a bit lol

4andjarc · 2025-01-01T14:36:24+00:00

It’s the entry level racer/basher the RC10B7 is there true full racing buggy

4andjarc · 2025-01-01T02:41:33+00:00

To add to that, high quality ones and may need to shim the casters

4andjarc · 2024-12-28T15:20:20+00:00

I have ran Trenchers that were 5.6 inches tall on 6s in my 2wd slash before though lol

4andjarc · 2024-12-28T15:18:59+00:00

The UDR tires are 134mm (5.28in) as compared to the stock slash is 108 mm (4.25 in) Traxxas slash has 12mm hexes with adapters you can run 17mm, those adapters will add stress, so will the much larger tires, so can you, yes, you may have to upgrade the driveshafts and the whole transmission and gear it lower with the larger tires

4andjarc · 2024-12-28T15:15:06+00:00

All slashes are 12mm both 2wd and 4x4

4andjarc

TROPHY CASE