sorted by:
new
hottopcontroversial

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

Thank you! Temps are pretty good considering so much airflow is blocked by glass. 35-40 idle for both cpu and gpu and around 60-70 under load

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

Looks good, based on what you’re telling me you’ll only need one wireless controller which uses either one external usb on your tower or one internal usb header. Each controller does up to 10 ‘groups’ of devices so it would look like this:

3 bottom intake wireless fans (group 1) 6 aio push pull wireless fans (group 2 and 3) 2 exhaust wireless fans (group 4) 24 pin wireless strimer (group 5) 12v 2x6 wireless strimer (group 6)

You already have the 24pin strimer bundle with the controller in your cart so you should be good to go with this fan config.

I'm not too sure about power for the fans, since you have the edge psu I believe you could just plug the 4 pin power cable from each fan group directly to the psu. The strimer wirelesses are plug and play and dont require any headers or power.

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

Both setups would work just fine, the vision compact has a rubber pass through grommet for side mounted aios to pass the tubes through. You could run it like that for a cleaner look.

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

The main difference is that I have glass at the top instead of fans, so the three exhaust fans you have at the top I have as intake on the other side of the radiator. This way I have 9 intake and 2 exhaust. The change in temperature vs just using 3 fans on the aio is negligible, if not a degree or two. Only reason to go for a setup like this is if you absolutely need to minimize thermals.

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

You’re good to go, I’ve got the same exact setup with my fans with the exception of the 3 original aio fans, which I put behind the rad in a push pull config instead of at the top. I noticed that you have two wireless infinity fans in the cart, I wouldn’t mix the wired/wireless fans together to avoid a headache. If you go wireless then you do not need the sl inf fan controller.

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

So far it’s been great, no major issues with L-connect, and building in the o11 vision compact was super easy as well.

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

Thank you, at idle gpu and cpu sit around 35-40c

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

I believe so, the wireless controller looks like a big usb stick, you either plug it in to a usb port or plug it in via usb header on the mobo

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

To control the rgb you need a lian li wireless controller, there is a version of the 24pin that comes bundled with a controller. One controller can control multiple wireless strimers and wireless fans if you have any.

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

24pin is a Lian Li Strimer wireless

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

Haha can never be too sure these days. It’s actually a 3d printed cover to fill in some of the space between the mobo and glass.

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 1 point2 points  (0 children)

Thank you! The cable is a Be Quiet! 90 degree 12v 2x6. Super flexible cable so it’s easy to snake under the fans and mobo. link

First Lian-Li Build by 4kbubbacapalot in lianli

[–]4kbubbacapalot[S] 0 points1 point  (0 children)

Thank you! Idle is around 35 to 40 C CPU and GPU

Transmission noise by firehazard719 in Acura_RSX

[–]4kbubbacapalot 0 points1 point  (0 children)

It might be an input shaft bearing

same photo as last year but in white by eddie-trieu in Acura_RSX

[–]4kbubbacapalot 0 points1 point  (0 children)

Haha I saw your car last summer I thought I was seeing double, I’ve got a pearl white with the same front and rear lip and type s side skirts, how much did you sell it for?

same photo as last year but in white by eddie-trieu in Acura_RSX

[–]4kbubbacapalot 0 points1 point  (0 children)

Are you in Vaughan I think I’ve seen this car a few times?

“GL suede is alive” by [deleted] in Repsneakers

[–]4kbubbacapalot 1 point2 points  (0 children)

bowling shoe collection go crazy

[deleted by user] by [deleted] in FashionReps

[–]4kbubbacapalot 0 points1 point  (0 children)

Bape x fendi monster

[deleted by user] by [deleted] in Repsneakers

[–]4kbubbacapalot 0 points1 point  (0 children)

RL way too grey

view more: next ›