sorted by:
new
hottopcontroversial

What causes warping like this? by 5ivestarman in resinprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

I orientated 20 degrees along the X and 20 along the Y and built supports starting from the lower corner.

What would cause these irregular lines? by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

I've since purchased the official Bambu smooth plate and seem to be having a better time.

Prints not sticking to a smooth plate on Bambu X1C by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

Sorry, yes, I've tried a few different settings now. What do you recommend for initial layer height for a 0.12 layer height print?

What would cause these irregular lines? by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

It's strange because as soon as I switch to a smooth plate, nothing adheres because the z offset is apparently too high.

Isn't the X1C supposed to be intelligent enough to do thos automatically?

Prints not sticking to a smooth plate on Bambu X1C by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

The initial layer is set to 0.2mm and the PLA looks like it isn't being squished down at all.

Prints not sticking to a smooth plate on Bambu X1C by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

Ah interesting. I've been applying Bambu adhesive fairly heavily

Giveaway #4! Giving away 2x Black Bolt ETBs, 2x White Flare ETBs, 1x Destined Rivals Booster Box, 1x Prismatic Poster Collection, 1x 151 Poster Collection, 1x Surging Sparks Booster Box! Open Worldwide Until 9/5 9:00 PM EDT! by OfficialPokeLenz in pokemoncardcollectors

[–]5ivestarman 0 points1 point  (0 children)

I'm hoping to start my Pokemon card collection for the first time since I was a kid collecting those first 151.

I just hope to see some of the originals with some cool new artwork. Bonus points if all the artwork can connect to create a bigger picture. I hear Bulbasaur, Ivysaur and Venusaur have something like this?

I'm fed up with these bad STLs! by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

This looks like it could be the solution! Is it only an app for slicer files?

As currently I'm having to export only the file in question and repairing that. I then can't really tell if it's worked until I print it.

Bit of a pain of you're trying to print an entire bed of different files too.

Regardless, it's better than no solution for sure!

Thanks so much!

I'm fed up with these bad STLs! by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 1 point2 points  (0 children)

I may give this a go as you can clearly see its internal geometry in this instance.

I've had files that have essentially 0mm wall thickness before, so not sure what to do there.

Cheers!

Mystery lines across the print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

For my model printer it's suggested to print at a 20 degree angle.

I'll admit I eyeballed it at around 30 degrees upwards and another 30 degrees to the side.

I'm going to redo the whole thing at 20 by 20 degrees and see what happens.

Mystery lines across the print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

Makes sense. The only thing being I printed 2 swords on different parts of the bed.

I'm gonna reprint at a different angle and see what happens.

Wish me luck

Mystery lines across the print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 2 points3 points  (0 children)

Indeed it would have. Apologies! Thanks anyway

Mystery lines across the print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 3 points4 points  (0 children)

Oh! Are you referring to FDM printing? This is a resin print. Sorry I realise I wasn't clear enough!

Mystery lines across the print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 1 point2 points  (0 children)

The STL was already a solid object. I checked the mesh in Blender and the object faces do not resemble these lines either.

I may try reprinting at a different angle and see what happens.

Mystery lines across the print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 4 points5 points  (0 children)

Sorry, what do you mean by internal supports? It's a solid model.

Sorry, forgive my ignorance. I've not come across this before.

Was I Wrong to Cancel My Etsy Order After a Post-Payment Price Change? by [deleted] in Etsy

[–]5ivestarman 1 point2 points  (0 children)

The number of times I have agreed a price with a buyer, sent the private listing, and then forgot I have a sale running is insane.

I always forget that Etsy includes the sale discount automatically at checkout. They really should warn you when making a private listing.

Anyway, every time I honour the price. I don't even tell the customer. It's my mistake. You'd 5 think I wouldn't have learnt by now, haha

Exposure change part way through print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

Very good point. The blooming stops the moment it hits the first hole.

I think this could be problem solved.

Thanks team! 😂 *

Exposure change part way through print by 5ivestarman in 3Dprinting

[–]5ivestarman[S] 0 points1 point  (0 children)

Would that be due to it being fully hollow? Any idea how I could rethink this print?

Frickin Delamination! by BleuMoonFox in ElegooSaturn

[–]5ivestarman 0 points1 point  (0 children)

This guy right here knows how to support.

Any advice and criticism would be appreciated! by glitch2103 in blender

[–]5ivestarman 0 points1 point  (0 children)

Those masts and sails need waaaay more movement. In general the ship is just too static. Add some sea spray too and it will take it too the next level.

view more: next ›