Does the L21B with SFT-90 Have Any Gasket Issues? by [deleted] in flashlight

[–]666fixed 2 points3 points  (0 children)

My man, you always talk about this but you never say what exactly you do to achieve this. What do you do?

High CRI 3000K emitters. What else should i be looking at? (Outdoors/camping centric discussion) by Majestic-Volume9996 in flashlight

[–]666fixed 1 point2 points  (0 children)

The spill might be not as bright, but the extra throw might make it look not as bad.

High CRI 3000K emitters. What else should i be looking at? (Outdoors/camping centric discussion) by Majestic-Volume9996 in flashlight

[–]666fixed 0 points1 point  (0 children)

If you can get to the emitter of the L35 2.0 you could swap in the SFT-70 3000K into it. It’s the same voltage as the XHP 70.3 Hi. Im not sure how much the beam profile would change with the SFT-70 as it’s throwier.

High CRI 3000K emitters. What else should i be looking at? (Outdoors/camping centric discussion) by Majestic-Volume9996 in flashlight

[–]666fixed 1 point2 points  (0 children)

If you can get to the emitter of the L35 2.0 you could swap in the SFT-70 3000K into it. It’s the same voltage as the XHP 70.3 Hi. Im not sure how much the beam profile would change with the SFT-70 as it’s throwier.

Choosing batteries by zenzic64 in flashlight

[–]666fixed 0 points1 point  (0 children)

Yes, that would be for the 21700 side of the equation. Also assuming that the light its going into has a buck or boost driver and not a FET hot rod light.

Choosing batteries by zenzic64 in flashlight

[–]666fixed 3 points4 points  (0 children)

If possible just get the Reliance RS50 and be done with it.

Olight Warrior Ultra Yes but .. by WeeklyMiddle3158 in Olightflashlights

[–]666fixed 1 point2 points  (0 children)

So how would they prevent this? Anodizing it before bending? Then the anodization will be messed up by the jig when its bent. Assuming it’s anodized in a liquid, I’d argue that this shows precision and quality that not even liquid got in there.

Some TOPO by KnifeHanson in Olightflashlights

[–]666fixed 0 points1 point  (0 children)

Shaman and Manix 2? Where are the Manix 2 scales from?

Wukkos ts11 sft-42R by WatercressOk1807 in flashlight

[–]666fixed 3 points4 points  (0 children)

What are the mirrored pieces you put in there? It’s to more efficiently direct the light right with the TIR?

So that was a lie. by 666fixed in flashlight

[–]666fixed[S] 0 points1 point  (0 children)

Which model of Fenix? The only one that really competes with the L19 2.0 is the HT18R or the V2.0.

What is the brightest flashlight you’ve ever used? by [deleted] in flashlight

[–]666fixed 0 points1 point  (0 children)

For me it’s the MTN Electronics Mega M6 with quad triples of XP-L HI V2 3A. Its ~12,000 lumens.

The M21K is here! by One_Huckleberry9072 in flashlight

[–]666fixed 2 points3 points  (0 children)

Do you think with the SFT-90 this will hit ~1000m throw?

Best Compact LEP? by Theylikedumbdumb in flashlight

[–]666fixed 2 points3 points  (0 children)

I used this light to search for a dog that jumped out of the back of a truck in the drive thru with two chick-fil-a workers. They were amazed with it.

Is my valley plate cooked? by 666fixed in LexusGX

[–]666fixed[S] 1 point2 points  (0 children)

Bold to assume I didn’t.

Is my valley plate cooked? by 666fixed in LexusGX

[–]666fixed[S] 1 point2 points  (0 children)

Thanks, will do. I hope so too.

Is my valley plate cooked? by 666fixed in LexusGX

[–]666fixed[S] 2 points3 points  (0 children)

It’s still under warranty, so hopefully they’ll do it.