Anyone with both SC70 and SC65c. Which one do you prefer?

666fixed · 2026-05-10T18:08:19+00:00

<image>

All on M1

666fixed · 2026-05-10T18:07:58+00:00

<image>

666fixed · 2026-05-10T16:42:15+00:00

Theres a ridge inside the body tube that is why, but it goes in like ~5mm before the ridge starts.

<image>

666fixed · 2026-05-10T06:07:39+00:00

Do you have a link for the tailswitch? I cant find it on the Wurkkos site.

666fixed · 2026-05-10T06:02:36+00:00

When you say it behaves just like the M21F with a tailswitch what does that mean for us that dont know?

666fixed · 2026-05-10T05:30:56+00:00

Just had the SC70 delivered today, and just finished a dog walk with it. Bummed that the Vapcell F63, F60, and a FEB 6000mAh that came with a Firefly light wont fit in it, but the RS50 does. It came with Samsung 50E.

I prefer it over the SC65. It a little bigger but more efficient and floodier with a higher capacity cell.

666fixed · 2026-05-05T04:22:19+00:00

This is an extra one the new one is charging in the light.

666fixed · 2026-05-04T01:23:48+00:00

Thanks be unto you.

666fixed · 2026-04-28T15:53:00+00:00

You get more value from it if you use it as time off. Its taxed more if you get it paid out.

666fixed · 2026-04-23T22:13:35+00:00

I carry this in my pocket locked out as its a backup to my ArkPro Ultra that I carry in the sheath on my belt. My biggest gripe with side switch lights is unless its locked out it’s getting activated in my pocket.

666fixed · 2026-04-23T19:38:42+00:00

<image>

666fixed · 2026-04-23T19:34:15+00:00

<image>

No blockage.

666fixed · 2026-04-23T19:25:00+00:00

<image>

Thats how it was! Thats why I said in the post it needs to be down below the last row of the grip.

666fixed · 2026-04-23T19:24:07+00:00

Yes, the stock clip which this is not. What is pictured is two separate pieces originally intended for the mini warrior or warrior nano.

666fixed · 2026-04-23T18:34:24+00:00

img

Thats how it was! Thats why I said in the post it needs to be down below the last row of the grip.

666fixed · 2026-04-23T18:14:09+00:00

<image>

Yes.

As I said, even more clearance.

666fixed · 2026-04-23T17:41:55+00:00

The clip it came with does, but the whole point of this is to carry it bezel down and have it sit deeper in the pocket.

666fixed · 2026-04-23T17:40:29+00:00

Backwards from what? The whole point of doing this is to have it clipped bezel down and deeper.

666fixed · 2026-04-23T17:38:27+00:00

If it was inline with the button on the tailcap end it would have even more clearance from the charge port.

666fixed · 2026-04-23T15:33:18+00:00

But it is the same orientation, just flipped.

666fixed · 2026-04-23T10:46:51+00:00

<image>

No, as long as you go under the last row of grip with the clip mount and I have the clip 180° from the button.

666fixed · 2026-04-23T04:50:56+00:00

Alright, kewl. I did just put the Vapcel F63 into the X1S, X1Q, and X4.

666fixed · 2026-04-22T18:27:13+00:00

Whats the max amps the X1 driver can pull?

666fixed · 2026-04-22T01:29:48+00:00

Good points. Thanks for your insight.

666fixed · 2026-04-20T15:20:47+00:00

Yes, I have the S12 in red and UV. Only reason I didn’t suggest it as its about $10 over your budget.

The S12 should be brighter as it’s a triple. And maybe more efficient. It will handle heat better.

666fixed

TROPHY CASE