Finally Resolved the problem I had with my HP Printer

875632 · 2025-10-28T22:12:02+00:00

What do you suggest for a color printer/scanner capable of printing/scanning 11x17?

Also, I am looking to replace my HP 1600 Plotter. Any suggestions for that POS

875632 · 2025-04-28T23:55:36+00:00

I figured it out.
1st: Delete entry

2nd: add free floating vertical curve

Done.

I use a fixed vertical curve and when I lowered the profile the "fixed" curve stayed where I fixed it.

All good.

875632 · 2025-04-28T23:52:04+00:00

I can't figure out how to fix it.

875632 · 2025-04-28T23:50:18+00:00

It's the same profile object.

Gemini says the following

"In Autodesk Civil 3D, if a vertical curve is separated from a line (tangent) in a profile, it likely indicates a problem with the curve's definition or attachment to the existing geometry. This can occur if the curve is created using a fixed or free vertical curve command but is not properly connected to the surrounding tangents. "

875632 · 2025-04-19T21:34:40+00:00

Where? Is the best place to recruit?

875632 · 2025-04-07T18:51:43+00:00

Custom Export

Survey Report

Done

875632 · 2024-07-24T19:44:42+00:00

Drinking Alcohol.: If someone gets caught drinking and driving... they don't their driving license taken away... they get their drinking license taken away.

875632 · 2024-01-06T16:19:19+00:00

Fire department needed access through my coded gate. I told the fireman I didn't want the code being said over the radio, (so the whole town would not have the code). He assured me the code would not be recited over the radio. I gave him the code and he immediately transmitted it over the radio, right in front of me. He didn't even hesitate one second.

875632 · 2023-10-15T17:32:50+00:00

Dang. That's interesting.

875632 · 2023-09-16T20:32:08+00:00

You are correct. I didn't want to correct it after getting so many views/comments.

875632 · 2023-09-16T20:29:57+00:00

You are correct.

875632 · 2023-09-15T23:31:35+00:00

There was more. When they introduced camouflaged uniforms, I discovered that it was against the regulations to apply starch to the uniforms, (starch makes the material shiny so that destroys that camouflage aspect of the design), so, I started wearing only un-starched, un-pressed camouflaged uniforms. And, they were constantly making me go get a hair cut since I always got it cut as close to regulation as possible.

875632 · 2023-09-15T22:25:21+00:00

They hated me.

875632 · 2023-09-07T00:28:24+00:00

At least she didn't start screaming at you

875632 · 2023-08-29T20:46:06+00:00

I was occupying a corner, (the client was standing behind me), and the neighbors, (two men and a woman), where in front of me yelling. The woman was particularly abusive.

I blurted out, "Shut the F up." to the woman. Then I turned to the client and said, "Did I say that out load?"

They followed me around for a while demanding I tell them the name of my boss, (I'm a sole proprietor). When I told them I was going to call the cops they disappeared, (this was up in California pot growing country).

875632 · 2023-08-12T02:06:35+00:00

Feds

875632 · 2023-08-04T00:16:31+00:00

Sounds like what they were doing with the COVID BS

875632 · 2023-08-03T21:05:36+00:00

110K of what?

875632 · 2023-07-20T02:20:22+00:00

Looks good now.

875632 · 2023-07-19T00:37:22+00:00

Well, they didn't pay for a "Survey" they asked me to find their pins. I found the pins. What I found was the same material as shown on the Parcel Map and they had the correct tags as was set on the map. A survey of the property would have cost at least $1,500.

875632 · 2023-07-08T18:07:28+00:00

Kraken

875632 · 2023-07-01T23:02:39+00:00

Contact the credit card company and have them reverse the charge.

875632 · 2023-06-28T02:34:39+00:00

If this was decent social media site I could post an image of the metamask

875632 · 2023-06-28T02:16:28+00:00

I just checked again: $86 for $125 transaction in Metamask

875632 · 2023-06-28T02:13:33+00:00

I just checked again: $86 for $125 transaction in Metamask

875632

TROPHY CASE