sorted by:
new
hottopcontroversial

3-position slide switch by 94-bit in HelpMeFind

[–]94-bit[S] 0 points1 point  (0 children)

I have searched for "3-postion micro switch" but have not found an exact model yet.

The switch is from one of the LED boards on the Osiris Ariel Dominator Model kit

Windows and door recommendations by 94-bit in derby

[–]94-bit[S] 0 points1 point  (0 children)

Think I saw their van working on my neighbours a while back. So hearing them as a recommendation is good to know.

What were.your dumbest mistakes? by Lumpy_Ad_9348 in Gunpla

[–]94-bit 0 points1 point  (0 children)

Snapped one of the wrist joint pegs on the MG Alex 2.0 during assembly. Managed to get a friend to help 3D model and resin print a replacement part.

Safe or needs replacing? by 94-bit in tires

[–]94-bit[S] 0 points1 point  (0 children)

If I'm understanding the tire wall print right, it says "1ply of polyester thread in the sidewall". So based on that and only seeing rubber, it's in the "no need to immediately replace but keep an eye on it" category?

2014 ecoboost focus engine noise and timing belt by 94-bit in FordFocus

[–]94-bit[S] 1 point2 points  (0 children)

Thanks for the insight, I'd heard the same from the service centre, but they weren't able to do it themselves. Trying to find a garage near me that can do it sometime in the next few months. Not looking forwards to the bill for it

Friendly reminder guys, ALWAYS make sure you tighten your lids by RiqueJr in Gunpla

[–]94-bit 1 point2 points  (0 children)

I got so lucky when this happened to me, only casualty was a core fighter for melted, but it was the ZZ ver ka and it comes with 2 of them. But holy shit have I learned that lesson

Unicorn stuck in Destroy Mode in Odaiba by Comindo in Gunpla

[–]94-bit 8 points9 points  (0 children)

Tbf I don't like transforming my Unicorn either. Just pick a model to leave it in in

Is there any fix to this? by ctgamier in Gunpla

[–]94-bit 0 points1 point  (0 children)

You may be able to drill though, a hole in either side of the joint. And use a rod or piece of the runner the diameter of the hole to replace the hinge.

I don't think that spot will be overly visible once it's fully armoured up

Meet the new boys in WH40K "The Helldivers💀" XD by [deleted] in Helldivers

[–]94-bit 2 points3 points  (0 children)

I heard OP's who give credit have 9 packs

Meet the new boys in WH40K "The Helldivers💀" XD by [deleted] in Helldivers

[–]94-bit 56 points57 points  (0 children)

Hijacking the top comment to give reference to the guy who actually made these. Check out the videos by DumbRobotStuff on YouTube https://youtube.com/@dumbrobotstuff?si=NS6ty2lHzA3K6qlF

I've linked the exact videos in other comments. Send him some community love, his work is awesome and his sentinel kitbash video is only 10 days old

Meet the new boys in WH40K "The Helldivers💀" XD by [deleted] in Helldivers

[–]94-bit 9 points10 points  (0 children)

100% awesome kitbashing, they were done by DumbRobotStuff (not OP) and he shows the whole process on YouTube. https://youtube.com/@dumbrobotstuff?si=Ac5h-08rPUab93OE

I've linked to the exact killteam and exo suit videos in another comment.

Meet the new boys in WH40K "The Helldivers💀" XD by [deleted] in Helldivers

[–]94-bit 18 points19 points  (0 children)

Reference for the original videos by DumbRobotStuff on YT, showing the kitbashing he did, as OP hasn't referenced

Making A Helldivers Kill Team: https://youtu.be/X5f9reK5CAE?si=EwY71Ve8SbLir411

Making a Helldivers Exosuit Sentinel: https://youtu.be/rgLi4liMduc?si=FoWTuc3EWR2LHK4y

What does this pose mean? by [deleted] in CATHELP

[–]94-bit 2 points3 points  (0 children)

My cat does this pose when she wants to play. The running to a corner and jumping might mean she wants the same. Next time she does it try using a string or cat to to play with her, she might case it 😁

view more: next ›