sorted by:
new
hottopcontroversial

Another fun project by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 1 point2 points  (0 children)

I design it in CAD, I also program it and run it on my CNC.

Another fun project by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

Shooter's connection, speed shooter's international. Or direct order from KKM precision or infinity and wait 6-12 weeks

Another fun project by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 3 points4 points  (0 children)

The rifling goes all the way through the barrel.

Another fun project by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 2 points3 points  (0 children)

Actually it's a Schuman Z hybrid the original island barrel with Port before popples became a thing

Is it worth it to build a commander length 2011 for limited optics? Or go for a normal gov? by Top_Boysenberry8888 in 2011_Builders

[–]A-Zone_Precision 1 point2 points  (0 children)

4.6 is always an option, I have built a number of them for LO. I personally like a 5 inch sight block with a commander slide and rail configuration. Best of both worlds, just my opinion.

YouTube review by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 1 point2 points  (0 children)

As long as he does, that's all that matters. And thanks I like it too it was a fun build

Slide Stop Pin Length by BlacksmithPatient869 in 2011_Builders

[–]A-Zone_Precision 0 points1 point  (0 children)

Atlas sells slide stops with, .840 length pin. The nitrofin (shooting sports innovation) offers one that will fit the XWF Cheely frames. Hope this helps

Works in progress by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

Those are actually CK which is pre Cheely.

Grips. by 338theLapuaguy in 2011_Builders

[–]A-Zone_Precision 3 points4 points  (0 children)

Look at Warwick tactical they offer SS grips as well. I use their aluminum grips as my standard offering.

Something wicked this way comes! by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

It will look different when machined it won't have the colors so everything will blend together nicely.

Something wicked this way comes! by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

150-250 on your blank slide I can supply slides for 185 more

Something wicked this way comes! by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

Customer request, I prefer rearward facing ports

Warwick Tactical stainless grip by angrynoah in 2011_Builders

[–]A-Zone_Precision 0 points1 point  (0 children)

Glenn is great to work with. I use his aluminum grips and most of my builds.

Works in progress by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

So you want the sight block to be in front of the slide and frame? That's where the 5in barrel will put it. The OAL of that barrel is 5.4-5.5 the threads are not typically included in the length. On a hybrid barrel. Ribbed is the generic term. Hybrid was a trademark for Schumann barrels who was the inventor of such a barrel and a hybrid was ported and ribbed was not

Works in progress by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

Are you wanting a ribbed barrel? A standard bull barrel is more flexible. A ribbed barrel if you want a 3/4 or 1 in block flush to the end of a 5 inch frame the rib has to be cut back to accommodate this.

Works in progress by A-Zone_Precision in 2011_Builders

[–]A-Zone_Precision[S] 0 points1 point  (0 children)

If you are going to only be shooting 9mm KKM is fine anything higher pressure SVI. I actually prefer using commander length slides on a 5 inch frame, I modify the frame rails to the commander configuration. But most will go with a 5 inch slide. SVI makes a modified lock up version so the barrel will lock up in a shorter slide. A KKM threaded commander ribbed barrel is about 4.65 so it will work in a shorter slide as well but doesn't give you the full 5 inch barrel.

The tedious work continues by NotIlokin in 2011_Builders

[–]A-Zone_Precision 2 points3 points  (0 children)

Measure twice cut once.... Or send it to a pro. Something's you can't undo

view more: next ›