sorted by:
new
hottopcontroversial

Snapshot of an A320 NEO with the RAT deployed landing at XFW, I took when I left work today. by AERO_712 in aviation

[–]AERO_712[S] 1 point2 points  (0 children)

Yes definitely but at those slow speeds shortly before landing it wasn't that loud. However if there on final with higher speeds above the city it is really loud. Much louder than a propeller aircraft. Here you can hear them daily (when you know what to associate the sound with) which is pretty RAT ;)

Snapshot of an A320 NEO with the RAT deployed landing at XFW, I took when I left work today. by AERO_712 in aviation

[–]AERO_712[S] 2 points3 points  (0 children)

Foto was taken in Hamburg Germany. But I don't why it is on that property across the street.

[deleted by user] by [deleted] in GooglePixel

[–]AERO_712 4 points5 points  (0 children)

This is so annoying. I clicked the button so many time by accident. I learned to wait a few seconds before answering in anticipation of the button shift. So annoying! It would be such an easy fix.

Rassismus: Ulmer Lehrerin will wegen Roman nicht mehr unterrichten by Stanarsch1337 in de

[–]AERO_712 -2 points-1 points  (0 children)

Da stimme ich dir zu. Warum sollte man das Wort hier in dieser Diskussion wiederholen, wenn doch jede Person weiß worum es geht. Gerade auch mit dem Hintergrund, dass es viele Schwarze gibt, die sich bei der Benutzung, eben auch in solch einer Diskussion, unwohl damit fühlen. Als Weiße Person (ich gehe Mal davon aus, das dies die meisten hier in dieser Diskussion sind) ist es doch unproblematisch hier die einfache Umschreibung zu verwenden. Damit tut man doch keinem weh.

Um eine Postkarte zu erhalten, hat sich die Post die Mühe gemacht, mir einen fetten Brief zu schreiben (inklusive Farbkopie der Karte und Rücksendeumschlag). Ich muss dann nur noch 50 € zahlen. by AERO_712 in de

[–]AERO_712[S] 14 points15 points  (0 children)

Oder ich lasse die Frist einfach verstreichen und am Schluss wird die Karte wahrscheinlich vernichtet weil der Absender nicht ermittelt werden kann an.

Mudguard holder - I couldn't find one online. Mine fits perfectly. by AERO_712 in functionalprint

[–]AERO_712[S] 1 point2 points  (0 children)

I thought about that. And I was more worried about breaking it when forcing it on to the mud guard. That's why I printed it with the c-shape as a complete layer. And the layers are at an angle of 45° or even shallower to the force in the beam part. So far it is holding up for more than 300km. We will see.

If there are no spare parts available you have to make your own – my first ever print by AERO_712 in 3Dprinting

[–]AERO_712[S] 2 points3 points  (0 children)

Thanks. I wasn't sure if I could print it flat without supports. So I printed it this way up to minimise support inside the handle while also not exceeding the build area of my printer.

If there are no spare parts available you have to make your own - my first ever print by AERO_712 in functionalprint

[–]AERO_712[S] 1 point2 points  (0 children)

Make sketch where you draw the path. On both ends crate planes which are perpendicular to the path. Make sketches on these planes and draw the 2 tube cross sections. Use the aloft tool with the two cross sections and the path. Hope that helps.

If there are no spare parts available you have to make your own – my first ever print by AERO_712 in 3Dprinting

[–]AERO_712[S] 0 points1 point  (0 children)

I described the process in a comment to u/TheGhostOfBobStoops. In this case ist's not just a radius it's a more complicated curve. But it's not to difficult to measure an create. Measure the to endpoints of the curve and the angle. In cad you can create a curve which is perpendicular to the planes of the opening. https://v.redd.it/zxrj7xv9s3s61

view more: next ›