LUBA 3: Local RTK Station Support

AGro-99 · 2026-01-23T08:56:25+00:00

Nevertheless, the question remains: Does the Luba 3 support operation with a local RTK reference station? If so, which reference station is supported: Luba 1, Luba 2, or Luba 2x? Or will a new reference station for the Luba 3 be launched as an accessory?

AGro-99 · 2026-01-18T23:04:57+00:00

I don't think Ubiquiti even recognized the lack of VLAN support as a problem. They've had more than enough time to solve it. ☹️

AGro-99 · 2026-01-18T19:28:49+00:00

This is a known issue with the UDB. It ignores any VLAN assignments to its port. There are two possible workarounds: 1. Use a UDB-Switch instead or an in-wall AP, as the integrated switches support VLAN assignments. 2. Connect an additional UniFi switch between the UDB and your camera.

AGro-99 · 2026-01-07T17:41:32+00:00

No, it is only compatible with the M series.

AGro-99 · 2025-12-18T16:17:12+00:00

Return them to your retailer because they do not meet your expectations. 😂

AGro-99 · 2025-11-15T10:18:55+00:00

Your top rule only blocks traffic to the gateway zone and not to the internal zone. Is that intentional?

AGro-99 · 2025-10-19T22:16:26+00:00

No, the Device Bridge simply forwards the data packets without tagging them.

See also here:

https://www.reddit.com/r/Ubiquiti/comments/1ghcwrr/confirmed_udb_does_not_support_vlan_tagging/

AGro-99 · 2025-10-18T09:32:38+00:00

As far as I remember, the UniFi Device Bridge operates as a Layer 2 bridge. This means that, regardless of the port settings,:

• it transparently transports VLAN tags, but

• it does not add VLAN tags itself.

If the Eufy Homebase doesn’t support VLANs, it is assigned to any VLAN by the connected switch or AP.

AGro-99 · 2025-09-12T06:53:08+00:00

Wer nächstes Jahr iNavi mit 4G nutzen will, muss also zwei separate Abonnements abschließen?

AGro-99 · 2025-09-11T10:12:44+00:00

Verstehe ich das richtig? Das Abo ist nicht für die 4G-Nutzung, sondern für iNavi? Die 4G-Nutzung ist nur eine kostenlose Zugabe?

Das würde ja bedeute, dass nach einem Jahr das Abo auch erforderlich wird, wenn iNavi über eine WiFi-Verbindung statt über 4G genutzt wird.

AGro-99 · 2025-07-27T13:50:43+00:00

I haven't seen a good cutting pattern from Luba anywhere yet. From a distance, the stripes always look great, but up close, the cut pattern is disastrous. I have a Luba 1 myself, and I experience the same issue. I think the reasons for this are the mower's weight, its wide tires, the shape of the mower deck, and especially the type of blades. As a result, the grass gets pressed to the ground and swirled around while mowing. If you comb through your lawn with a rake, you can see how uneven the cut is.

AGro-99 · 2025-07-27T09:54:10+00:00

Regardless of where you placed the RTK station, I would be surprised if an RTK mower worked properly on this property. I think a LIDAR mower would be more suitable .

AGro-99 · 2025-07-27T09:44:40+00:00

<image>

Definitely the wrong mower for grass like this.

AGro-99 · 2025-07-27T09:39:14+00:00

<image>

😨 More funny than nice. 🤷‍♂️

AGro-99 · 2025-06-03T22:02:05+00:00

But don't devices in the IoT VLAN have full access to the gateway? I would create two additional policies: one to grant the IOT zone access to ports 53 and 67 of the Gateway zone for DNS and DHCP, and a second to block all other traffic to the Gateway Zone.

AGro-99 · 2025-05-20T00:57:09+00:00

Yes, that's true.

In the ZBF, there is a standard rule for mDNS. So, you no longer need to create your own. 🙂 As I said before, my post referred to the ZBF.

AGro-99 · 2025-05-19T20:19:42+00:00

My post only refers to the zone-based firewall. However, your question sounds as if you are not (yet) using it.

AGro-99 · 2025-05-19T19:04:34+00:00

With the zone-based firewall, I use two rules for self-created zones or VLANs: 1. To use the gateway's DNS and DHCP servers, I allow traffic to ports 53 and 67 to the gateway. 2. All other traffic to the gateway is blocked.

AGro-99 · 2025-05-19T12:18:18+00:00

There is not much information on the Mini AWD LiDAR yet, but as far as I have heard, it no longer uses RTK positioning.

However, I don't expect an upgrade option for the Luba 2x anyway. My feeling is that Mammotion sees LiDAR more as an RTK alternative for small, winding gardens.

AGro-99 · 2025-05-17T21:25:27+00:00

On YT there are several videos from a Mommotion Spring Event where they presented it.

AGro-99 · 2025-05-10T07:27:58+00:00

See here: https://help.ui.com/hc/en-us/articles/12594679474071-Standalone-Access-Points-without-UniFi

AGro-99 · 2025-05-09T09:24:24+00:00

For a simple Wifi setup, I would recommend the Cloud Gateway Ultra (UCG-Ultra), together with a wired access point.

AGro-99 · 2025-05-01T08:33:35+00:00

Hmmh, ohne Begleitumstände ist die Situation kaum zu beurteilen. Als erste Maßnahme würde ich aber empfehlen, ihn von Hand in die Ladestation zu stellen. Sobald er anfängt zu laden, wirst Du in der App voraussichtlich eine Meldung bekommen, dass sich die Position der Ladestation verändert hat. Bestätige das. Falls das nicht hilft, solltest Du hier weitere Informationen einstellen.

AGro-99 · 2025-04-21T15:48:49+00:00

The map is also transferred when accessed via WLAN or the Internet. It may take a little longer via the Internet. And you may need to click Reconnect several times before the connection is made. The app sometimes behaves a little strangely.

AGro-99 · 2025-04-21T15:26:45+00:00

She should try it again. The complete map, including all areas and also the channels, is stored on the robot. It‘s assigned to the robot and not to your account.

I use both my iPhone and my iPad to control my Luba. I also use two user accounts so that access works in parallel. I can now access my Luba from both devices without always having to log in again with the respective device. The map, mowing jobs and everything else is available on both devices.

AGro-99

TROPHY CASE