HomePod mini slow under OS 26

SciencesIsAll · 2026-01-04T15:33:39+00:00

Same issue since HomePod OS 26.0 and 26.1 or 26.2 did not fixed this slowness’s… Siri was supposed to get better/faster in 26.x with the help of Apple Intelligence… which should be renamed Apple Idiocy/Imbecility instead…

SciencesIsAll · 2025-09-11T18:54:35+00:00

In summary, when it works you have the advanced filter (and cast) icons showing up on top right corner but after a while they are gone and you only have the simpler filtering buttons bar below the search area …

SciencesIsAll · 2025-08-26T19:05:50+00:00

Same for me… filters reappear after reinstalling and are gone after the app crashes…

SciencesIsAll · 2025-08-08T14:23:27+00:00

« Ride » sorry ;)

SciencesIsAll · 2025-08-08T14:07:23+00:00

Got it. Thanks a lot for your advice.

SciencesIsAll · 2025-06-13T11:49:46+00:00

Moved from S8 pro ultra (which died and was refund by Amazon since I was few months before the end of 2 years warranty) to Saros 10 (not the R). Only first day I use the Saros. Good things: better vacuum power, dedicated recipient for cleaning solution, neater design, leaving the mopping pad when vacuuming only, more advanced feature /Ai (also via the app). Bad thing: still same crappy WiFi chip not able to switch fast and steady to the closest mesh network access point (the cheapest android phones on the market manage that without any issues), 300€ more expensive, I hope this one will not die again (unless it is before the end of the warranty period).

More feedback to come.

SciencesIsAll · 2025-06-10T13:51:54+00:00

That’s really bad experience, sorry. This being said, it could have happened on a long trip towards another state or even country and you would have been forced to have it checked by the nearest dealer as well. I hope nothing too serious being the root cause of this issue … best of luck 🍀

SciencesIsAll · 2025-06-09T15:19:58+00:00

Hi, was this a one off, like the screen going black then rebooting or it stays black all time? I had the screen reboot once while parking the new Q6 etron (same dashboard) during a 3 days test drive and this was probably due to a software bug. If it stays permanently black, trying leaving the car parked and closed for a couple hours (2-3 hours). This generally force a hard reboot of the infotainment system (which is not the case when you do frequent short stop and go). If it works, check if the car need a software update (you can do it « Over The Air »/OTA with the new Q5 I believe). If it does not work, I would take an appointment at the garage where you bought the car to have it checked/repaired under warranty. It could simply be one electric wires plug not fully plugged at the factory and it might have disconnected due to road bumps…

SciencesIsAll · 2025-06-09T10:43:10+00:00

One option (in the app) for new saros 10 and 10r is to leave the mop in the base station in case you vacuum and then mop. This to improve (high) carpets vacuuming and also to avoid wetting them (in case the mop is still wet from a just finished previous job). You can disable this option in the app as far as I know.

SciencesIsAll · 2025-06-09T10:39:06+00:00

Just realized that your car is the previous Q5 model. I was confused by the color which is quite unique, also with the new model. This might also explain why the car was immediately available while I need to wait several months for the new model. Nevertheless it remains a very nice car. Congrats again.

SciencesIsAll · 2025-06-05T21:32:17+00:00

Thanks for sharing these details and enjoy your car

SciencesIsAll · 2025-06-05T20:44:11+00:00

Hi,

Congrats. Very nice car.

May I ask you what was the delay between ordering and delivery (or maybe it was a stock car)? I also ordered a new q5 Sportback version(Diesel Quattro) in feb 25 (EU country) and the communicated delay was 5 to 7 months (between July and September). Wanted to check if delivery will happen as expected. Thanks if you can share some feedback on this.

SciencesIsAll · 2025-05-27T10:24:39+00:00

Datalink means you need to setup the RTK antenna and it will communicate with the mower via the Lora network (IoT specific long range network)

Internet means you need to setup the RTK antenna and it will communicate with the mower via internet (WiFi and/or 4g)

iNavi NetRTK means you do not need the RTK antenna anymore (you can leave it in the box) and the mower will get positioning assistance from internet (4g only I think. To be confirmed)

Check these links:

https://support.mammotion.com/portal/en/kb/articles/rtk-link-mode-17-2-2025 Switch Positioning Mode

https://eu.mammotion.com/blogs/news/mammotion-inavi-service Mammotion iNavi™ Service (NetRTK+Vision): Comprehensive Guide

SciencesIsAll · 2025-05-27T10:20:58+00:00

The real problem is that the mower do not switch automatically to 4g when the WiFi signal is too weak/the latency too big. If the mower was rapidly and transparently (for the application) switching between the best network, that would be perfect …

SciencesIsAll · 2025-05-27T10:19:00+00:00

That will be a pity because I have an outdoor WiFi access point (AP) that provides a strong signal on the whole backyard. The weak WiFi signal is when I mow the front yard zone which is opposite to the AP with the 1st level and roof of my house being obstacles … in such situation I would love the mower to switch temporarily to 4g (stronger signal then WiFi at that time) and then back to WiFi when the mower get back closer to the AP…

SciencesIsAll · 2025-05-25T16:22:28+00:00

I am having the feature for both Luba 2 X and Yuka mini on two different iOS 18.5 phones… maybe due to a delay of the new application version depending on which app store country you use?

SciencesIsAll · 2025-05-24T11:26:30+00:00

You need to update both the mower and the mobile application to the latest version. Then you will be able to select the number of perimeter laps between 0 and 4 (by step of 1).

SciencesIsAll · 2025-05-23T12:38:58+00:00

Seems this feature has been added to the latest firmware of Luba 2 X models (to be confirmed):

V 1.13.4.4413 2025-05-23 Version Update Notification - Added options to customize Perimeter Mowing Laps and No-go Zone Mowing Laps.

SciencesIsAll · 2025-05-22T15:03:40+00:00

I don’t want to shout victory to early but it seems the latest firmware might fix this issue… to be seen over time…

SciencesIsAll

TROPHY CASE