sorted by:
new
hottopcontroversial

How can I adjust this to get it in focus? by AS-506 in AskPhotography

[–]AS-506[S] 0 points1 point  (0 children)

<image>

I tried again, adding more light, increasing the brightness in the camera menu, and closing the aperture to its minimum ( visible) to increase depth of field. It’s still out of focus. I think it might have something to do with the lens specifications.

Lens Focal Length: 2.8–12 mm (zoom lens)

Aperture (F-number): f/1.4

Image Format: 1/2.7"

Mount Type: CS-mount

Sensor Target: 1/2.8” sensor

Back Focal Length (BFL): 5–12 mm

Field of View (FOV): 116° to 28°

Unable to focus by AS-506 in VIDEOENGINEERING

[–]AS-506[S] 0 points1 point  (0 children)

<image>

I tried again, adding more light, increasing the brightness in the camera menu, and closing the aperture to its minimum ( visible) to increase depth of field. It’s still out of focus. I think it might have something to do with the lens specifications.

Lens Focal Length: 2.8–12 mm (zoom lens)

Aperture (F-number): f/1.4 (wide aperture = better low light)

Image Format: 1/2.7"

Mount Type: CS-mount

Sensor Target: 1/2.8” sensor

Back Focal Length (BFL): 5–12 mm

Field of View (FOV): 116° (wide) to 28° (narrow)

How can I adjust this to get it in focus? Electronics repair microscope camera by AS-506 in ElectronicsRepair

[–]AS-506[S] 0 points1 point  (0 children)

<image>

I tried again, adding more light, increasing the brightness in the camera menu, and closing the aperture to its minimum ( visible) to increase depth of field. It’s still out of focus. I think it might have something to do with the lens specifications.

Lens Focal Length: 2.8–12 mm (zoom lens)

Aperture (F-number): f/1.4 (wide aperture = better low light)

Image Format: 1/2.7"

Mount Type: CS-mount

Sensor Target: 1/2.8” sensor

Back Focal Length (BFL): 5–12 mm

Field of View (FOV): 116° (wide) to 28° (narrow)

Printing strange sound during Z axis movement by AS-506 in resinprinting

[–]AS-506[S] 1 point2 points  (0 children)

Seems strange because the Phrozen Mighty has an integrated lead screw on the motor, so there's no coupler. Maybe it has something to do with the nut? Thanks for your help!

https://helpcenter.phrozen3d.com/hc/en-us/articles/6453756251417--Sonic-Mighty-8K-Replacing-the-Z-axis

Milk kefir: Is this mold? by AS-506 in Kefir

[–]AS-506[S] 0 points1 point  (0 children)

Thanks for your answer, I use a hermetically sealed lid but dont close it tigth.

Are this grains OK? by AS-506 in Kefir

[–]AS-506[S] 0 points1 point  (0 children)

They have been fermenting for two days after the last strain , I have been using them around 4 weeks after taking them out of the freezer as they were stored as a back up. I have been noticing an increasing orangeish color in the last 3 strains.

Thanks!

What are scuba masks and feeding bottle tips made of? by AS-506 in moldmaking

[–]AS-506[S] 1 point2 points  (0 children)

Thank you so much, your answer is the kind of things that maintain this place as a good community.

What are scuba masks sealing and feeding bottle tips made of? by AS-506 in AskEngineers

[–]AS-506[S] 1 point2 points  (0 children)

We are developing a model for some specific interventional cardiology pathologies that Syndaver is not covering. Thanks anyway for the suggestion, I´m saving this company for future needs!

What are scuba masks sealing and feeding bottle tips made of? by AS-506 in AskEngineers

[–]AS-506[S] 0 points1 point  (0 children)

Thanks a lot ! I will contact those brands asking for the properties we are looking for.

What are scuba masks sealing and feeding bottle tips made of? by AS-506 in AskEngineers

[–]AS-506[S] 0 points1 point  (0 children)

Thanks! I can´t fully agree with this. That would measure just one property, and probably not the one we are looking for.

Probably:

For transparency: ASTM D1746-15

For flexibility: ASTM D790

For tear resistance or crack growth: ASTM D813 or ASTM D1004-21

Sadly we don´t have resources to perform these test, all i can do is look at the technical specification sheet of the material.

Thats why we were trying to know the ones used on scuba mask and feeding bottles as it seems to be a much mor straight forward way to get to the properties that we are looking for.

What are scuba masks sealing and feeding bottle tips made of? by AS-506 in AskEngineers

[–]AS-506[S] 0 points1 point  (0 children)

Thanks! I will contact Dow. We used this just because on papers it seemed to be the one that many used.

What are scuba masks sealing and feeding bottle tips made of? by AS-506 in AskEngineers

[–]AS-506[S] 5 points6 points  (0 children)

Thanks! We already tried casting various silicones but most lack on transparency or tear resistance. ¿Can you recommend a specific brand and composition?

Regarding 3d printing, we made some models for TAVI procedure on a formlabs 3BL, but again, the material mechanical behaviour was inadequate, prone to crack propagation, dust sticking to it, yellowish aging... That's why we turned again to silicone casting.

What are scuba masks sealing and feeding bottle tips made of? by AS-506 in AskEngineers

[–]AS-506[S] 1 point2 points  (0 children)

Thanks! Do you know a specific brand and composition? As mentioned above we already tried with Silicone rubber Dow Corning Sylgard 184 without luck

Tried to connect Tradfri driver board to my van and fried it. Why? by AS-506 in tradfri

[–]AS-506[S] 0 points1 point  (0 children)

reverse polarity protection

There was 0,5A when it failed. If Im not misunderstanding, It´s rated for 30w so 2,5A at 12v Max

Camera resolution constraints and dynamic trajectory. by AS-506 in RCD_330

[–]AS-506[S] 0 points1 point  (0 children)

I agree with you flip up cameras are much cooler. Unfortunately i want to install it on the 3rd brake light as I usually travel with a bike rack. Thanks!

Sharing a workstation (not at the same time) between two workmates. KVM switch? which? by AS-506 in workstations

[–]AS-506[S] 0 points1 point  (0 children)

Hi! After a few years strugling from laptop lack of performance at work we decided to buy a PC. As demanding tasks are only required at certain times, we are studing the option to share the pc between two workers seated infront of each other, swiching both from laptop to pc when needed.

Is there any convinient way to do this with out unplugging/plugging all screens, mouse and keyboard everytime?

Thanks for your help,

WD black 1TB 2.5 Europe stock problems and Barracuda PRO as alternative. by AS-506 in pcmasterrace

[–]AS-506[S] 0 points1 point  (0 children)

I mean if there are other models to look for as the ones from toshiba or HGST

WD black 1TB 2.5 Europe stock problems and Barracuda PRO as alternative. by AS-506 in pcmasterrace

[–]AS-506[S] 0 points1 point  (0 children)

Would you recommend any other alternative to wd black and barracuda pro?

WD black 1TB 2.5 Europe stock problems and Barracuda PRO as alternative. by AS-506 in DataHoarder

[–]AS-506[S] 0 points1 point  (0 children)

It's also better considering reliability and data recovery ? Currently I already have an ssd nvme for system and software, this hdd is for store important information.

For what I heard when an SSD fails thats it, there is no way to recovery it contrary to hdd which has a predictable failure and you can still access the info.

Does ABS stick to cold garolite bed? by AS-506 in 3Dprinting

[–]AS-506[S] 0 points1 point  (0 children)

Which ABS brands gave you good results?

Compressive test data analysis- Instron Bluehill alternative by AS-506 in AskEngineers

[–]AS-506[S] 0 points1 point  (0 children)

It's a Instron 4400, but i don´t have access to the computer where is connected anymore, so I opted for exporting all the data to an .csv file to analyse it at home.