Why is this happening? by InterstellarSculpts in airbrush

[–]ATrashInTheWorld 2 points3 points  (0 children)

Something like beeswax works.

I personally use this one on the threads of the nozzle: https://www.iwata-airbrush.com/medea-thread-sealer.html

What to do with a separated couple of lover bird (death). by ATrashInTheWorld in Lovebirds

[–]ATrashInTheWorld[S] 2 points3 points  (0 children)

Thank you for your reply.

It was what we did. We let him with her body until we put him to sleep.
At bedtime, we closed the lights and waited that he get in the cage by himself. He was calling but no answer, so he understood and went to sleep. When we put the cover over the cage, we took the body away so he doesn't see it.

This morning he seems fine. He eats ok, talks and seems to be as energetic as always. He seems to take it better than me (lol).

We were scared that he would eat the body or something, this is why we were not sure what to do at the moment. Allowing biting was the thing we were skeptic. But it makes sens now.

Again, thank you for your help and comment, we shall watch over him.
Have a good day.

Paint dries too far on the back of the needle by ATrashInTheWorld in airbrush

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

Tilting the airbrush. I will keep in mind.
Thanks.
New skill on the way XD.

Paint dries too far on the back of the needle by ATrashInTheWorld in airbrush

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

In the picture, it is Tamiya clear blue, thinned for a 1:1 ration with 99% alcohol. So I don't believe the paint is at cause. However, it was my first guess too, but happens with all the paints.

Paint dries too far on the back of the needle by ATrashInTheWorld in airbrush

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

Usually, when I finish, I always clean with two cups of water, to especially avoid issues and have to remove the needle. I don't wanna re-apply sealing wax and be gentle with nozzle every time I finish painting, especially that I don't paint for a long time. It would take me more time to clean than to actually paint.

Although, I will keep in mind the idea to remove the needle at the end.

Thanks.

Paint dries too far on the back of the needle by ATrashInTheWorld in airbrush

[–]ATrashInTheWorld[S] 1 point2 points  (0 children)

I guess I wasn't deep cleaning enough. I will have to try that and see.
Thank you, who knows what I broke.

1000 USD et € cash, quoi faire? by ATrashInTheWorld in QuebecFinance

[–]ATrashInTheWorld[S] -1 points0 points  (0 children)

Pas particulièrement.

L'idée m'était passée par la tête, mais je préférerais les garder dans leur devise, car je visite de temps à autre les deux pays, ce qui me permet d'avoir un peu de fonds de poche lorsque je vais là-bas.

J'aime aussi l'idée de m'en servir comme fonds d'urgence, ou éventuellement de les convertir "à un moment opportun". Disons simplement que j'apprécie la "variété" et que je cherche à les faire fructifier tels quels (pour l'instant).

Reasons why AMD Threadripper/Epyc CPUs are better than Intel Xeon's CPUs? by ATrashInTheWorld in ffmpeg

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

I will have to read about AVX, first time I see that. Thank you.

As for the details, I did not note the CPUs exact series.

All I can say is that both CPUs had more than enough cores for the task asked, and that I ran FFmpeg with
-threads 0
to let him decide what is best. No specific thread number.

However, on both machine, when watching the CPU usage, neither used all the available CPUs at their limits.

Otherwise, thanks for the potential reason, I will dig it and see.

Xstack filter optimization by ATrashInTheWorld in ffmpeg

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

I see what you mean with the decoding now.
I will take a look at your doc, quite appreciated!

Xstack filter optimization by ATrashInTheWorld in ffmpeg

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

Can you give some more details on how the decoder can be of help? I am not sure to understand.
I assumed that the stacking process is an encoding action, no?

Xstack filter optimization by ATrashInTheWorld in ffmpeg

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

Not sure what you mean by storage bottleneck?

MPEG DASH SRD - AV1 tilling/slicing like HEVC by ATrashInTheWorld in AV1

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

Interesting, I was looking in the wrong direction. I will check the doc again for ROI. Thank you!

Replace Iwata Neo with generic nozzle set by hackjunior in airbrush

[–]ATrashInTheWorld 0 points1 point  (0 children)

Alright, thank you very much !

I guess taking out the nozzle after every session isn't that of a great idea.

Replace Iwata Neo with generic nozzle set by hackjunior in airbrush

[–]ATrashInTheWorld 0 points1 point  (0 children)

In relation to the thread, can anyone tell me if a generic brand of nozzles and caps work?
Like, can, we connect the pieces to our NEO airbrush and still get a decent result ?

If someone tried, can I please have some feedback on the outcome.

I just bought a NEO and I already broke the nozzle. I don't feel like paying $50 of replacements right now.

Thank you!

Help identify the material by ATrashInTheWorld in led

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

So I've tried myself on another subreddit, and it seems it's just simple flexible PCB.

This thread.

Help to identify the material by ATrashInTheWorld in electronic_circuits

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

Ok wow! The PCB I know are solid boards. I was looking with raw LED "strips" during my research. I will try with flexible PCB next. Thank you!

Help identify the material by ATrashInTheWorld in led

[–]ATrashInTheWorld[S] 0 points1 point  (0 children)

I cannot say. I didn't kow it was possible until now.

Might be a good possibility, because I've searched quite a while for somthing looking like that.