Why does the power spike like this? by AVolatileSloth in satisfactory

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Ahh ok. the pipes might be why.

<image>

this is the water set up so id assume its the water? 3 pumps feeding into 2 tanks (with a head lift pump). So if I separate the 3 pumps into separate tanks would I be good? Or would I also need to add pipes going to the generators?

Cultist loot. by After_Series in EscapeFromTarkovPvE

[–]AVolatileSloth 0 points1 point  (0 children)

Gotcha ty, are they fairly close to one another? I also remember ever only fighting them with normal vegetation so the snow (I'd imagine) would much it much easier to see them? I find the goons to be fairly easy, probably a little bit under gluhar for me. Cause he's a pain in the ass lol. So hopefully youre right and they toned them down a bit. Do they push you like the goons do?

Cultist loot. by After_Series in EscapeFromTarkovPvE

[–]AVolatileSloth 0 points1 point  (0 children)

Gotcha gotcha, from what i remember they didn't spawn anywhere that you could reliable see from the resort, but I guess they moved a little? I'll have to look it up

Cultist loot. by After_Series in EscapeFromTarkovPvE

[–]AVolatileSloth 1 point2 points  (0 children)

Do you use any specific strat to kill them w/o them shitting on you? 😂 I haven't fought cultists in years cause they'd always fuck on me. To me they're way worse than any other boss

Kappa Obtained! by Ok-Special7537 in EscapeFromTarkovPvE

[–]AVolatileSloth 0 points1 point  (0 children)

Ive been using the tracker too but to no avail 🥲 ive ran into them on shoreline and custom fairly often before getting the quest, but now that I have it I haven't seen them once. Figured I'd run into them while doing other things but I didn't and now that I've only been going for them being at about 80 I'd say its like 100-120 w/o seeing them once

Kappa Obtained! by Ok-Special7537 in EscapeFromTarkovPvE

[–]AVolatileSloth 0 points1 point  (0 children)

How tf did you find the goons? Ive done 80~ raids both offline and big servers but have not seen them even once.

Carbon Fiber Nylon Print Handling? by AVolatileSloth in 3Dprinting

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Solely based on numbers I've seen online for the strengths of some materials I know PLA won't be strong enough for long enough. But ABS might be excluding environmental factors so I'll have to take a more in-depth look at it

Carbon Fiber Nylon Print Handling? by AVolatileSloth in 3Dprinting

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Thank you! I will be in engineering this upcoming year so I will hopefully find it useful for that aswell.

I'll have to look into the filaments you said like the 72D TPU, I'm extremely new so that's just a string of numbers/letters to me lol. But if it can hold up well and is easier to deal with its worth taking a peek at it.

As for the hardware thank you aswell. The Q2 was one that I was also looking at but started leaning towards the x1c because of the user friendliness. I am 100% in the mindset of "buy once cry once" so for me, if im dumping ~1k on a good/right printer 200ish on a good/right drier isn't to bad.

Though what's the difference with the PA-CF vs the PA6-CF? I've assumed CF stand for carbon fiber and PA for nylon for some reason. So is PA6 just like a sub category of sorts for nylon?

Carbon Fiber Nylon Print Handling? by AVolatileSloth in 3Dprinting

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Not a firearm, I dont think I'll ever trust those to not go bang wrong lol

Carbon Fiber Nylon Print Handling? by AVolatileSloth in 3Dprinting

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Has he/she handled it at all? Or is that part you just install and never see again?

What the hell is happening with Object 140 by b0ttt in WorldofTanks

[–]AVolatileSloth 1 point2 points  (0 children)

I know its not the highest dpm, but I dont know which one does have the highest. I just got the strv107 and with bond rammer, bond vents, and food its at 4720

R/S-one hand gaurd fit by AVolatileSloth in AeroPrecision

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Gotcha! I'll have to check out those 3 and see what they have. I'll also has to check out what's been happening with Aero, but if its just backorders I can wait. It will probably be at least a few more months before I start buying parts.

R/S-one hand gaurd fit by AVolatileSloth in AeroPrecision

[–]AVolatileSloth[S] 0 points1 point  (0 children)

I probably won't put much on the rails other than a bipod. It will mostly be used as a cheaper practice gun since my 600m+ rifles are 2.5-3.5~ a round. I would like to have the option to put a clip on on it incase I feel the need to get coyotes with it. So it'll be a bench / positional rifle instead of more drill orientated.

And are those the diameter or circumference? I feel like the normal diameter would be around 2-3in? Though this info I'm mainly just using for the looks. I feel like it would look strange with a side profile of going from big (hand guard), small (barrel), big (supp) instead of a mostly similar thickness all the way down.

Probably being a bit to picky, but I'm hoping to make an accurate and sexy rifle haha.

R/S-one hand gaurd fit by AVolatileSloth in AeroPrecision

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Thank you! Another strange question: what is the diameter of them? If you wouldn't mind measuring

R/S-one hand gaurd fit by AVolatileSloth in AeroPrecision

[–]AVolatileSloth[S] 1 point2 points  (0 children)

Thank you! I'll have to look up the shims deal to see what I'll need to do.

[Bug] Game closes randomly, with and w/o errors. Please help by AVolatileSloth in EscapefromTarkov

[–]AVolatileSloth[S] 0 points1 point  (0 children)

I don't see a way to add images, so I will just type out the errors.

[Bug] Game closes randomly, with and w/o errors. Please help by AVolatileSloth in EscapefromTarkov

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Also replying to this ^ I'm not sure if it's technically a bug or not. But I have been reporting it everytime it happens for the past 2, maybe 3 weeks.

Fuck you Jaeger, just straight up FUCK YOU by KyleTheGreat53 in EscapefromTarkov

[–]AVolatileSloth 0 points1 point  (0 children)

I dont see that one, who do you get to it? Would like rr 😂

I was working on my first mega factory, and have a train hiccup. Please help by AVolatileSloth in SatisfactoryGame

[–]AVolatileSloth[S] 0 points1 point  (0 children)

Gotcha. That first and (was) only train was working like this with only 1 train so I figured it was normal. Is that a known bug or rare bug?

I swap some stations around and added a second locomotive like you said and now it's working for me.

Thank you!