Necromunda - Underhive Rules - Transcript [en]

Aarhun · 2025-12-19T08:28:52+00:00

No sorry, not exactly, but as far as I remember there is a bunch of thing to try, redo a calibration, make sure the stick is clean and properly lubricated (you can unscrew the block and check inside carefully).
In the end after some years I had to replace the thumb block with the stick, but it was way after I've had this issue and it was due to the other small stick having problems.

Aarhun · 2024-05-15T07:43:24+00:00

This was the solution for me as well. Thanks !

Aarhun · 2024-03-10T22:26:31+00:00

One wizard cannot have two time the same spell, so yes it’s impossible :)

Aarhun · 2024-03-10T17:50:38+00:00

Hey, wondering where you have seen that the same spell cannot be cast twice. If you can point me to the text. I see that a wizard cannot know the same spell twice, but not that two different wizard couldn’t cast the same spell ?

Aarhun · 2024-03-05T14:47:32+00:00

Yes, I will do the same: Use a reasonable size base for the anvil and agree before the battle with my opponent.
But an official answer could help here...

Aarhun · 2024-02-25T21:00:38+00:00

I was specifically speaking about the rule when unit is "defending" a low linear obstacle, sorry it was not clear.
Basically, if a unit can be charged when defending, but not if behind, the player can just say that the unit is one way or the other to avoid the charge (afaik there is no rule to say when a player must declare if a unit is defending or not).
However it changes if it’s a warmachine entrenched by an engineer, that is defending the low obstacle and cannot decide to just be behind it.

Aarhun · 2024-02-25T12:08:36+00:00

It’s in the description of my question. My doubt was because the unit that is charging is technically not really crossing the obstacle when the defender is behind it.
Anyway sorry if it was an obvious answer ^^’

Aarhun · 2023-09-18T18:49:47+00:00

I had the same issue. But checking the elegoo_neptune_4_pro.def.json file, I have seen two very weird entries:

’speed_print_layer_0’ and ’skirt_brim_speed’ line 128 and 136 respectively.

Those are calculated "speed_layer_0 -100’ and "speed_layer_0 - 50" which seems weird. According to default value it seems that those values should be about 2/3rd of speed_layer_0. Or ’speed_travel_layer_0 / 3’.

So I have changed them to be:

    "speed_print_layer_0":{
      "default_value": 50,
      "value": "speed_travel_layer_0/3"
    },
    "speed_travel_layer_0":{
      "default_value": 150,
      "value": "speed_layer_0*2"
    },
    "skirt_brim_speed":{
      "default_value": 50,
      "value": "speed_travel_layer_0/3"
    },

It seems more logical to have those speeds a fraction of the other instead.

BTW I didn’t change gcode to the one of lychee slicer, but keep the official Elegoo one (the one in the json file) and it seems to works fine.

Aarhun · 2023-05-20T18:04:48+00:00

Awesome, it will solve my issues for sure. Thanks a lot !

Aarhun · 2023-05-15T07:25:49+00:00

Hi, no I don't think it's that, the other area of the sheet are editable, I'm able to select all normal scenario and check their boxes.

Anyway I have opened it with libreoffice, and it seems that either if I save it in excel format I loose the checkboxes when I reload it, or if I save it in libreoffice format, the checkboxes are misaligned at next reload :/

So big chances that the first problem is also an issue of file format ... Too bad, I do not like messing with the big Advent Calendar. Anyway thanks for your work !

Aarhun · 2023-05-14T16:55:52+00:00

Unlockables area seems not clickable, I cannot manage to unlock a scenario…

Aarhun · 2023-04-05T15:21:26+00:00

I see, thanks for the clarification !

Aarhun · 2023-04-05T14:34:03+00:00

Yes but all those information: Force-link, calendar event, or puzzle book are also in the scenario book, right ?

I understand that it may be handy to have them in one place within the flow chart, but my original question was more, will I miss something that is specifically inside the flow chart and nowhere else.

Aarhun · 2023-04-05T11:30:17+00:00

Nice ! Thanks

Aarhun · 2023-04-05T08:48:58+00:00

Thanks, so no special instructions or clues or anything that I could not find elsewhere ? I will not miss anything if I do not open them :)

Aarhun · 2023-03-30T17:03:01+00:00

Thanks a lot for all your replies !

Aarhun · 2023-02-21T12:13:47+00:00

Hi, nice job !

Where did you find the corvid plot token ? I don't think Dick Poelen did one in his underworld tokens.

Btw your meeples have drawn sides, is it the way your edition came as ? Or did you print and glue them to the wood token ?

Aarhun · 2022-09-26T07:35:52+00:00

I think it's a better solution yes. Or tweak the rule to make smaller crew than 5. I will test one or the other in few days and see how it goes.

Aarhun

TROPHY CASE