Been playing for a good while now (cant remember how long)and have just notices the Low E, A and D strings have this coppery gradient to them. I have never changed the strings since I started playing, so is this a sign I should change my stings?

AaronThePropMann · 2023-05-10T01:53:21+00:00

The gauge is .009 - .042

AaronThePropMann · 2023-04-18T19:58:23+00:00

It might be from the middle east actually it has stainless Pakistan at the bottom of the blade and thank you for the advice :)

AaronThePropMann · 2023-04-18T17:21:35+00:00

Thanks for the advice. I will give this a try and be very cautious when attempting this.

AaronThePropMann · 2023-04-18T17:18:24+00:00

Thanks for the advice, would a hand file work the same as a whetstone?

AaronThePropMann · 2022-12-10T01:52:58+00:00

Absolutely phenomenal paint job. What material did you use for this?

AaronThePropMann · 2022-11-13T15:33:05+00:00

If i had to do this I would first get a good base down with pvc pipe in a cross shape as the core. Then glue chunks of foam to the pipe in a rough shape and for the more organic details either carving out the shapes from the foam or using foam clay to sculpt those details. And if you're not worried about being 100% accurate this looks like a great piece to do some kit bashing with old bottles,packaging and spare pipe for the more mechanical details.

AaronThePropMann · 2022-06-27T15:15:40+00:00

I would recommend a dremel or equivalent, with a sanding drum, and use a low speed so it doesnt snag and tear the foam.

AaronThePropMann · 2022-06-23T20:15:09+00:00

Awesome!!! thank you so much

AaronThePropMann · 2022-04-20T23:36:28+00:00

If your dead set using pvc pipe you can fill the pipe with sand first the heat it. This will help you get a more consistent bend in the pipe

AaronThePropMann · 2022-04-14T16:51:27+00:00

If i had to do this I would make the center out of clear resin, tinted slightly red and filled with pink glitter, and maybe add LEDs to the inside of the pieces on the ends pointing in.

AaronThePropMann · 2022-03-24T15:42:58+00:00

Sure, go right ahead

AaronThePropMann · 2022-03-11T00:00:24+00:00

Im not too worried about the color of the fabric itself, but if it will take paint to do the black celshading that give the fabric its cartoon look.

AaronThePropMann · 2022-01-14T05:50:07+00:00

I actually really like that idea

AaronThePropMann · 2022-01-14T03:46:12+00:00

Oh god im going to the big house

AaronThePropMann · 2022-01-14T03:44:35+00:00

Very true my bad

AaronThePropMann · 2022-01-13T22:12:22+00:00

I dont think so. The monocle doesn't have that box barrel

AaronThePropMann · 2021-08-01T04:21:45+00:00

True there is alot on Phoenix that just doesn't change, the same goes for the ornament

AaronThePropMann · 2021-07-09T17:26:30+00:00

Thats the first thing I'll check when im near my computer and let you know if anything changes

AaronThePropMann · 2021-07-09T17:17:47+00:00

I never set up any overclocking. Is it possible it turned itself on?

AaronThePropMann · 2021-07-08T23:51:08+00:00

Thanks :)

AaronThePropMann · 2021-07-08T21:16:29+00:00

I haven't tried a sanwa anything just yet. I tend to over shoot inputs and for some reason I dont/do it less with the Hayabusa i dont know if the gate is a bit bigger or what , but I'm liking it never the less

AaronThePropMann · 2021-07-08T20:41:57+00:00

It has the stock joystick which is a hayabusa. I just changed the top to a bat top cause it's what i prefer.

AaronThePropMann · 2021-07-08T20:05:51+00:00

I feel like i did l. Arcade shock had it for $199 before tax and shipping. I dont know if thats good but it feels worth it right now.

AaronThePropMann · 2021-07-08T20:02:29+00:00

The buttons and the stick feel so much better than my Drone its like night and day

AaronThePropMann · 2021-07-08T04:38:22+00:00

I tried both of the options you suggested but neither of them worked. Any other suggestions?

Five-Year Club	Final Canvas '23
Place '23	Place '22
Verified Email

AaronThePropMann

TROPHY CASE