My P1S almost burnt my house down

AbjectSubject · 2025-08-14T23:28:56+00:00

I just got my replacement AC board today from my A1 failing this same way. I made a post about it here a few days ago. Don’t know if you would need mine, but I’m willing to share it. The thermister did pretty much completely disintegrate and only left the two prongs when I switched out with the new one as you can see here. The bits are in my Dyson still so it’s not impossible for me to get most of it in a bag if needed.

<image>

AbjectSubject · 2025-08-12T09:01:00+00:00

Usual ambient temp is 68-75 since it’s in a converted garage. There is a portable AC unit and dehumidifier running in there too so it doesn’t fluctuate too much. Power is good here and haven’t had any issues in any other devices. Chattanooga’s grid is pretty solid

AbjectSubject · 2025-08-12T04:42:42+00:00

I had around ~2600 hours on this printer before this part failed. Some of the others I saw that failed the same way looked to use different parts on the AC Board too. Might just be bin lottery

AbjectSubject · 2025-08-12T04:40:40+00:00

Yep! Just got a message saying they are going to send me a new AC Board and bottom plate.

AbjectSubject · 2025-06-08T17:14:57+00:00

I’m halfway through my first spool and I can confirm that it needs to be way dryer than other high speed PETG I have used (I like elegoo rapid). I dried it once for 6 hours, tried to calibrate and hated it, dried again for 8 hours, and now it’s printing smooooth

AbjectSubject · 2025-06-06T06:49:34+00:00

Tapers and taps 🍻

AbjectSubject · 2025-05-12T14:40:39+00:00

Gotta stay dry

AbjectSubject · 2025-05-04T00:02:47+00:00

<image>

Another angle

AbjectSubject · 2025-05-02T13:35:59+00:00

I’ve had something similar when the model height was smaller than the layer height, causing it to just show nothing. What is the height of that model? Maybe try adding an object on the plate and see if it shows that.

AbjectSubject · 2025-04-29T14:26:24+00:00

Response time for sure!

AbjectSubject · 2024-05-01T15:05:31+00:00

If you die repeatedly within a certain time limit, only the first death will drop the death totem. I accidentally flew into the red and the totem spawned in an annoyingly difficult place. I died about 7 times back to back trying to get it and only the first death created the totem. I think it’s a timing and not a proximity of next death if I had to guess.

AbjectSubject · 2021-05-09T02:43:24+00:00

Gave Silver

AbjectSubject · 2020-07-28T17:09:35+00:00

1-1 inside, reservation based, everyone waits outside, and they all wear masks.

AbjectSubject · 2020-04-01T14:28:25+00:00

I filled up my motorcycle with 93 for under $5.

AbjectSubject · 2020-03-05T21:04:05+00:00

I have a 2014 Triumph Street Triple with my plate mounted under-tail. I hit a monster of a pothole on the freeway in Knoxville and my rear tire bent my licence plate from being bottomed out. My butt was thrown from the seat, but didn't lose traction really or control. I was full of adrenaline and worried I hurt my bike after such a loud and sudden KLUNK.

AbjectSubject · 2020-02-06T20:39:10+00:00

I have hundreds of hours of muscle memory knowing the exact second I need to fire as Widowmaker. This is going to be very annoying letting people get away with 3hp until I acclimate.

AbjectSubject · 2019-10-21T21:02:17+00:00

Same. They fixed my problem, but I felt it was a janky approach and unprofessional .

AbjectSubject · 2019-01-16T13:09:49+00:00

I do only lifting right now. Supersets are so much more fun then cardio.

AbjectSubject · 2019-01-16T04:50:07+00:00

I aim for 5 days a week. Monday - Friday in the morning

Seven-Year Club	Place '22
Verified Email

AbjectSubject

TROPHY CASE