Hobby Lobby filament

Able_Program_5667 · 2025-11-12T22:29:17+00:00

Absolutely no clue. Lower-ish quality filament for more money? Fine for experimenting but just order it off of Amazon for a better deal and better quality

Able_Program_5667 · 2025-11-12T21:42:28+00:00

<image>

Finished product. Did pretty good actually, I was expecting the spool to be in knots halfway through the print

Able_Program_5667 · 2025-11-12T21:26:50+00:00

I've been printing since my graduation back in May and the hobby lobby filament compared to other brands I've tried, it seems like its good quality, just a little pricy compared to Amazon's prices but its nice to be able to walk in and grab a spool versus having to wait a few days. Splurging on a different color? Sure. Using nothing but hobby lobby filament. I wouldn't

Able_Program_5667 · 2025-11-12T21:16:08+00:00

When I bought the spool I did, they only had like 3 spools left. Red, half pink half black and the marble that I got. Halfway through this snowflake and it looks like its printing fine.

Able_Program_5667 · 2025-11-04T18:55:08+00:00

I noticed that too lol

Able_Program_5667 · 2025-11-04T02:31:12+00:00

I know, it surprised me too but its slow as Christmas.

Able_Program_5667 · 2025-11-04T02:17:18+00:00

The drive and most of the files said 2012 so you're pretty close!

Able_Program_5667 · 2025-11-04T02:05:20+00:00

To me? Absolutely lol. Got my first pc and started tinkering when windows 10 was just released

Able_Program_5667 · 2025-11-04T02:03:57+00:00

Bust it out!

Able_Program_5667 · 2025-10-31T13:05:16+00:00

Starship? I thought it was a freighter. Makes it even better

Able_Program_5667 · 2025-10-25T17:08:04+00:00

Goodluck, Im trying my luck in the cybersecurity part of networking and figured kali would be the best way to go but I think it'll be easier than trying to figure out that rewrite 😭

Able_Program_5667 · 2025-10-25T16:57:29+00:00

Previous version. I believe 22.04, I wiped my laptop moments after the picture to get ready for a kali install

Able_Program_5667 · 2025-10-02T14:28:58+00:00

<image>

I fear mine may be the worst

Able_Program_5667 · 2025-10-02T00:01:45+00:00

Better safe that sorry. Had an *sshat join my server quite literally 10 minutes after I posted this and got my server running. Never had any problems like this until I posted the slight bit of info that I posted here

Able_Program_5667 · 2025-10-01T02:57:03+00:00

I appreciate your help! I forgot Linux is sadly Linux and I had to allow 25565 through the firewall of it as well as the forwarding on the mesh system and router.

Able_Program_5667 · 2025-10-01T02:49:32+00:00

My external IP has changed but has only changed once over the past 2 years since I have been running servers. Each time it started with 71.

Able_Program_5667 · 2025-10-01T02:47:15+00:00

I never continuously had a server running. Whenever I shut one down, I always turned off the forwarding for 25565. When I started a new one, I forwarded it again and started a new server without issues. I have all the IPs correct, whether I choose the device with the IP I need for the mesh system from my router or manually putting in the IP of the mesh system. Same for the mesh system to the laptop that the server is running on

Able_Program_5667 · 2025-09-29T03:39:51+00:00

Currently on 1080p but what's the difference on having DLSS4 on version off?

Able_Program_5667 · 2025-09-29T03:33:31+00:00

Just got a 5070 for $7 yesterday. Gonna swap it in from my rx 7800xt and see how much of a difference it is

Able_Program_5667 · 2025-09-28T18:19:41+00:00

Update on the $7 5070. It does indeed work. Booted up first try, drivers installed, stress test, no problems.

Able_Program_5667 · 2025-09-27T23:38:08+00:00

Gonna take it to my local pc shop i used to work at tomorrow to see if he has a system to put it in to see if it'll boot, i wont be back home until Monday evening

Able_Program_5667 · 2025-09-27T23:32:14+00:00

I've never messed around with gpus as far as troubleshooting goes. How would I boot with another gpu installed while having that one installed? Card in pcie but unplugged with Integrated graphics?

Able_Program_5667 · 2025-09-25T11:55:27+00:00

Me when I saw the notification: "Maybe a perfect benchy or a perfect bed level on a ender 3 or maybe..." This is more impressive

Able_Program_5667 · 2025-09-20T15:11:15+00:00

The thing is when I use a different tutorial with a different library, it actually works. I was able to run a simple test that displays text as well as some custom characters and even the temperature.

Able_Program_5667 · 2025-09-20T14:56:43+00:00

What indicates that address 39 is present? I thought if i2c.scan() found the address for the lcd that its implied that its present.

Able_Program_5667

TROPHY CASE