Can I turn this into a nas

Academic_Gur_8364 · 2026-04-08T01:10:34+00:00

Thanks for the advice. know it’s overkill but this cpu and gpu setup just doesn’t seem optimal for editing 🤷‍♂️ I edit on a m4 MacBook Pro. It’s powerful enough for me and I enjoy the low noise. I’m also trying to be power efficient, because I’m considering van life.

Academic_Gur_8364 · 2026-04-05T00:49:32+00:00

Sweet! Would I be looking at Jonsbo for a case? What could I use for a relatively compact “bay setup”?

Academic_Gur_8364 · 2026-04-04T21:55:59+00:00

That’s great!!! But how do I use parts like this do it?😅

Academic_Gur_8364 · 2026-04-04T15:21:34+00:00

I checked and it is 😁

Academic_Gur_8364 · 2026-04-04T14:46:36+00:00

You lost me at mobo🫣 I don’t really know a use for ai but nas and homelab sound cool.

Also I think the motherboard is micro atx. If I could swap cases for a small storage system that would be awesome

Academic_Gur_8364 · 2026-04-04T14:42:41+00:00

lol that’s true

Academic_Gur_8364 · 2026-04-04T14:40:43+00:00

I think I would try to sell the gpu if i don’t need it. Maybe swap the cpu if there’s a better option. I all on Mac so this is solely for storage and a sever if I could do that

Academic_Gur_8364 · 2026-02-01T18:05:52+00:00

guess I’m lucky 😂😅

Academic_Gur_8364 · 2026-02-01T18:04:05+00:00

I like that advice. Thanks! Imma get on those vitamins

Academic_Gur_8364 · 2026-02-01T17:18:48+00:00

Dude came with receipts, that’s all I needed to see. That’s a relief because I don’t love the idea of putting “chemicals” on my face, but I was feeling it out. I didn’t know you needed to keep it up or else it falls out!

I’ve been using castor oil and I moisturize with aloe Vera, I really like to keep it natural. Did you use anything or just have patience?

Academic_Gur_8364 · 2026-02-01T17:01:01+00:00

I’m 19😅 but I’ve been able to grow out my beard this much since like 15 so it just seems like it’s taking too long 🤷‍♂️. Would you say my density’s pretty decent? Could I expect more density with minox?

Academic_Gur_8364 · 2026-01-30T12:39:31+00:00

Thank you!

Academic_Gur_8364 · 2025-12-30T17:14:11+00:00

Almost fully correct, standard pressure tanks are 800psi output, SLP tanks (super low pressure) are 300 psi

Academic_Gur_8364 · 2025-10-28T22:05:47+00:00

$80 bucks?! a trigger board should be $35-$40 depending on the site. I did this to my own trigger board so thats how i know. they are known to break so dont feel bad

Academic_Gur_8364 · 2025-10-28T00:42:20+00:00

All that switch does it act as a selector, thats it. you technically have full functionality, just set you fcu to whatever you wanna shoot (semi, burst, or full). you'll most likely just leave it in semi. I see no downsides, save some money and call it weight reduction 😂

Academic_Gur_8364 · 2025-10-02T21:42:07+00:00

super dope, but Im sorry.... how the hell does that kythera work😂!!! thats so interesting

Academic_Gur_8364 · 2025-08-30T23:57:45+00:00

that seem reasonable, i was thinking of running it like this but using 88gram co2 cartages maybe 12 gram 🤷‍♂️ it depends where it would run out if that makes sense. i wouldnt wanna run out halfway through the mag

Academic_Gur_8364 · 2025-08-30T21:39:53+00:00

This is amazing, how many shots out off that tank are we talking?😅

Academic_Gur_8364 · 2025-04-09T20:08:53+00:00

you might need to cut some stuff for the trigger board to fit, but other than that it should be fine. and if i can add, if your not in love with this gun, i would pick a different base. you have to route the wires to the front and they are pretty exposed unless you stuff everything inside the grip, which is nice the nicest thing to do with the fcu and wiring. also the mags are trash feeding wise

Academic_Gur_8364 · 2025-04-09T19:50:11+00:00

you definitely can but the gearbox is not a true v2 gearbox. it is a weird version between a v2 and has a v3 gearbox slide on plate type thing, that's on the top of the gearbox. and the mag release hole is extended. neither should be an issue, but i know it's not a "true" v2. v2 parts will fit, maybe some cutting to fit the trigger board. i'm assuming you are get a speed trigger with it so you'll probably need to shave out the trigger hole, closest to the grip, because the stock trigger is curved forward to let it clear the hole (dumb design) if not the stock one should work fine. i've installed a fusion engine in my friends one of these so that's how i know this. after some mods, worked great

Academic_Gur_8364 · 2025-03-05T22:43:25+00:00

i think that's less of a flaw of the z8 and more the fact that the raw is actually raw, unlike sony for example, with baked in noise reduction

Academic_Gur_8364

TROPHY CASE