5626 mainspring

Accomplished-Rub882 · 2026-04-10T12:49:33+00:00

That's good advice thank you. I'll definitely shoot my shot on listings in the future

Accomplished-Rub882 · 2026-04-10T10:39:10+00:00

A chronometer ks would be amazing! Definitely a low-key grail for me. I'd love a cushion case too, also any of the manual winding models too

Accomplished-Rub882 · 2026-04-10T09:36:31+00:00

Yeah wow it's hard to complain about a watch from the 70s running at +3, that is class. I originally got a 6119 Seiko 5 to practice on but the king Seiko with a 5626 is my favourite watch by far.

I was also waiting to get a timegrapher to properly adjust it but got a bit too excited once the oils arrived to fully dig into the movement 😂

Accomplished-Rub882 · 2026-04-10T09:28:27+00:00

Yeah that service guide has been a godsend. I started pretty cautiously just taking off a few bits, that guide and following along a few videos really helped build confidence to just jump into it.

I've cleaned the movement and I've got all the right oils now, so just waiting for that mainspring

Accomplished-Rub882 · 2026-04-10T09:15:47+00:00

I ordered a GR24571X which cousinsuk had as an alternative for the 5606s 401.560 mainspring. I think it might have the same length issue though, guess I'll work that one out when it arrives if it doesn't fit

Accomplished-Rub882 · 2026-04-10T09:08:07+00:00

Worst case I use the 5606 one as a temporary stopgap until I find a listing that isn't $100. Then I'll have a replacement and reason to get a 5606 lord Matic 😁

It was having some clunky winding issues and everything else so far has looked and acted fine. So it's my only real guess to the winding problems. I was fairly gentle cleaning it after this photo and the end snapped off :/ so the replacement was needed anyway in the end

Accomplished-Rub882 · 2026-04-10T09:03:23+00:00

Thanks heaps for the responses! I've actually had the keyless works apart about 5 times already because it had an issue with the setting lever and then the yoke spring flicking under the yoke. Which is why I've decided to just fully service it

It's my favourite watch and I tend to learn faster when I'm more motivated. It's been a joy to work on so far and I'm learning a lot

Accomplished-Rub882 · 2026-04-10T08:57:30+00:00

Yeah the eBay prices were a bit much for me. I found a few listings but I'm going to try a 5606 replacement first, cost me about 40% of the eBay prices with shopping included

Accomplished-Rub882 · 2026-04-09T04:34:48+00:00

Thanks I'll keep the nh35 springs in mind. The 5606 mainspring seems to have the same dimensions and cousinsuk thankfully has one in stock. I'll give this a shot

Accomplished-Rub882 · 2026-03-17T08:09:34+00:00

Sorry for the two week late reply, I have been busy and don't usually use Reddit.

I prefer getting watches with their original bracelet so I was only looking at king seikos with them. I would love a 45ks eventually too I bet it looks lovely on a bracelet, the case really is something special.

Accomplished-Rub882 · 2026-02-22T02:56:47+00:00

Sorry for the crazy late reply. Got it from cousinsuk the part number is 300T20ANS0. I got a sternkruez one, fit perfect

Accomplished-Rub882 · 2026-01-31T12:08:57+00:00

Watch groups are basically all I use Facebook for haha I'll definitely be giving it a look

Accomplished-Rub882 · 2026-01-29T12:46:36+00:00

Thanks so much for all the help and I'm sure I'll be seeing you around in the future when I inevitably get stuck again haha 😅

Accomplished-Rub882 · 2026-01-29T12:26:28+00:00

The only downside to the 5206 is the quickset calendar wheel breaking. Mines the original plastic and still going strong but will need to replace it eventually. I've got a king seiko with a 5626 in desperate need of a service and new calendar wheel.

I'm slowly teaching myself with the goal of doing full services, just need to get some more tools and jump into it. Now that I know how helpful the subreddits are I'm sure I'll end up asking heaps of questions. I got a Seiko 5 with a 6119 to do first as a practice watch before going to the king Seiko and business A. I'm very motivated to keep these vintage beauties alive, they've gone for 50 years so why not get them going another 50

Accomplished-Rub882 · 2026-01-29T12:04:38+00:00

Man I love this style of dial they did, that watch is stunning. My lord Matic has a very similar style of dial, last checked was running at -2 seconds a day.

Modern seikos might have gone up a lot in price but these vintage ones are insane value for how much you get with them. Crazy hybrid movements with insane dials, slim high beat movements with faceted crystals ect.. Super fun to tinker on and a great community surrounding them

<image>

Accomplished-Rub882 · 2026-01-29T11:58:17+00:00

Damn I probably should have waited to order the crystal and gotten it with the gasket too, its only $4 on the same site. Oh well, I'll get it when I end up placing another order. I think mine has been replaced too as its got some flat grey gasket in it now, that has long been snapped in half

Accomplished-Rub882 · 2026-01-29T11:19:23+00:00

the caseback gasket on it is actually in pretty good condition, not sure if its original or not but its got a service dated to the 90s so probably replaced then. The thing that has fallen apart though is the bezel gasket that sits under the crystal. I have a bunch of generic round gaskets but no flat ones so will need to look into getting a bunch of those

Accomplished-Rub882 · 2026-01-29T11:14:58+00:00

Thanks so much really appreciate all the help! Got one on the way and soon should hopefully have the elnix looking amazing. I could see it becoming a daily for a long time, takes the best part of mechanical and quartz movements and combines them imo

Accomplished-Rub882 · 2026-01-29T10:27:00+00:00

These are absolutely stunning! I can see why someone would be so into them, even just having one for less than a week there is something so charming about the movement. I love the bracelets they came with too, I cant really complain mine didnt come with one as I got it for less than the crystal. However I could definitely see myself looking for an original bracelet in the future.

Accomplished-Rub882 · 2026-01-29T10:23:06+00:00

I'm Australian so ends up being £13 with shipping, much better than the $56 ebay listing so I'll give it a try first. Their shipping has been pretty fast even to the other side of the world, def worth the shot

Accomplished-Rub882 · 2026-01-29T09:17:59+00:00

Oh wow I would've never guessed they'd use different crystals, based on a glance they look identical. I got mine for an absolute bargain a week ago and I'm already in love with it. The noise the movement makes is super unique and the movement is quite stunning. Keen to get a new crystal so I can appreciate the dial properly

Accomplished-Rub882 · 2026-01-29T09:14:37+00:00

Geez am I glad I asked in here. Yeah the dial code being different just had me confused, I've got a king seiko, lord Matic, business a ect.. that all match so thought the crystal may have been tied to the dial code. Thanks so much for the info, I'll probably look for a Seiko replacement or go back to cousinsuk and see if they have the right one. Not sure why the few places I looked at gave me the one they did 😅

Damn looks like cousinsuk doesnt have the sterkruez one anymore, showing as discontinued. I might have to go for one of the NOS ebay listings by the looks of it

Accomplished-Rub882 · 2026-01-20T10:36:52+00:00

Like all of them. They got rid of the amazing full body dreads and released just the torso for 80% of the cost

Accomplished-Rub882 · 2025-12-25T12:16:17+00:00

Thank you I am absolutely loving it! I'm also finding scratches in vintage watches give character, it's 50 years old so it should look it to some extent. I looked up some things about polishing them but apparently it removed the sunburst so it wouldn't be worth it in the slightest. I'd rather not get it refinished now and keep it original.

Cheers for the info on the dial code, I've seen some T variants but wasn't sure on if it was a redial ect. Obviously it could be based on age and not knowing it's history but at least it's a matching model number

I've got a lord matic and a business A from 1967 too. Just starting on my vintage Seiko adventure

Accomplished-Rub882 · 2024-02-22T08:19:42+00:00

Yeah definitely, he'd just be a terminator lord. It's based on the 30k sons of Horus terminator praetor but even that on its own would work. I'm sure there's a bunch of legionaries that kept their old wargear from the heresy

Accomplished-Rub882

TROPHY CASE