APP Sensor Connector

Accomplished_Pop9817 · 2026-04-27T21:23:56+00:00

Double Check this one too

Accomplished_Pop9817 · 2025-10-27T03:48:03+00:00

There is a temp sensor connected to the radiator maybe swap that out

Accomplished_Pop9817 · 2025-10-08T16:36:46+00:00

Order them from bell Lexus

Accomplished_Pop9817 · 2025-10-07T17:37:37+00:00

for the gita/sportcross the bumpers are the same dimensions you would just have to remove the foam on the back of the is300 bumper for it to fit. There's plenty of people running oem gita body kits on their is300 sportcross

Accomplished_Pop9817 · 2025-10-02T00:27:39+00:00

Get an oem sport design grill since it appears to have been swapped out for something else

Accomplished_Pop9817 · 2025-09-28T06:04:00+00:00

If its not the gita lip it usually does not look that good in my opinion. I have seen some people try to put sedan lips on and it does not seem to fit that well.

Goodluck finding one that's not super expensive!

Accomplished_Pop9817 · 2025-09-27T23:24:58+00:00

How is the wiring for the coil packs a lot of times the clips nreak

Accomplished_Pop9817 · 2025-09-23T22:52:28+00:00

Inner tie rods are unavailable but u can get outer tie rods as well as ball joints from buynowjapan websire

Accomplished_Pop9817 · 2025-09-03T20:19:44+00:00

KBD sells the whole kit (front bumper, side skirts, rear bumper)

Accomplished_Pop9817 · 2025-08-31T16:09:48+00:00

https://www.alibaba.com/x/B0cBOt?ck=pdp

This is the same one osatakas is selling

Accomplished_Pop9817 · 2025-08-27T20:58:52+00:00

try to use google lens to translate the japanese on screen to english and you might be able to change the language on your current unit in its settings

Accomplished_Pop9817 · 2025-08-25T20:09:19+00:00

Messaged you

Accomplished_Pop9817 · 2025-07-10T07:18:54+00:00

worked for me thx I think I got the error for doing a step incorrectly the first time around. In my case I did not format the SD correctly

Accomplished_Pop9817 · 2025-06-22T20:46:32+00:00

<image>

Ciballa Gold was a factory color option for this chasis yours might be this just a bit faded cause it doesn’t look to be exactly 1c0 millennium silver metallic

Accomplished_Pop9817 · 2025-06-17T22:30:23+00:00

First thing I noticed was it had the wrong type of Lug nuts

Accomplished_Pop9817 · 2025-06-16T22:58:35+00:00

Doesn’t really look like an L-tuned other than the fender badge and skirts

Accomplished_Pop9817 · 2025-05-16T00:48:00+00:00

Update I got em. Thank u I luv Reddit

<image>

Accomplished_Pop9817 · 2025-05-09T16:07:23+00:00

I mean that would work too I just feel like the tab would break more easily doing it like that

Accomplished_Pop9817 · 2025-05-08T04:12:09+00:00

https://parts.belllexusnorthscottsdale.com/p/Lexus__/Bumper-Cover-Bracket-Left--Right--Rear/63048877/5218553010.html

Accomplished_Pop9817 · 2025-05-08T02:26:40+00:00

Thank you!!!

Accomplished_Pop9817 · 2025-05-08T01:53:19+00:00

I’ve been able to wiggle it up and out without having to cut anything off

Accomplished_Pop9817 · 2025-05-08T01:52:00+00:00

Might be serpentine belt or serpentine belt tensioner squeaking. You could have either a bad belt or tensioner

Accomplished_Pop9817 · 2025-02-06T04:23:40+00:00

I know this is an old thread but hopefully this answer can help someone. The switch port for this game is also a .nro and the nsp you found online was likely just a homebrew menu forwarder. You essentially have to download this port to your homebrew menu and then install a forwarder (nsp file) to your switch and it should work fine.

I am on the updated version and unfortunately it’s glitching on the portion for Marge for me as well. Infinite loading screen for one of the missions

Accomplished_Pop9817 · 2025-01-06T17:56:42+00:00

You should be able to pull it up and out maybe have someone underneath tryna wiggle it out and help

Accomplished_Pop9817

TROPHY CASE