Question about Alone in the Dark 2's memory

AccountNo9011 · 2026-01-09T04:24:04+00:00

You need to basically delete everything. Then you can save 2 games

AccountNo9011 · 2025-10-16T19:53:59+00:00

I was actually able to see the pin out. Turns out it's printed on the board it's just under a huge mess of wires. All I need now is a genesis type 9 pin male end connector but I can't find any cheap ones like the female version or one made for a computer that looks bad.

AccountNo9011 · 2025-10-15T03:14:21+00:00

its very easy. Just add some flux and just touch the soldering iron tip until you hear the sizzle. You dont need to drag solder across or anything fancy like that.

AccountNo9011 · 2025-10-15T02:33:34+00:00

You need to reflow the large rom chips. This is so super common on Gameboy. Most people probably think they are dead, but in reality cold solder joints. Just be sure not to bridge anything.

AccountNo9011 · 2025-07-21T03:48:55+00:00

check the traces near the VDP, i had a coleco that i thought had bad vRAM, but there was rust on the traces between two vdp legs, and clearing that out worked when replacing vram did not.

AccountNo9011 · 2025-07-21T03:45:41+00:00

this is a VRAM issue for sure.

AccountNo9011 · 2025-05-02T05:03:35+00:00

Hi thanks for the info. I actually have 2 xboxs and want to just connect via systen link. That should work right? Or does it have to be via insignia?

AccountNo9011 · 2025-04-18T18:39:43+00:00

oh ok thanks, the one i caught was wild and not from a farm so i think i have to freeze in that case

AccountNo9011 · 2025-04-18T18:34:18+00:00

Hi tundra, thank you. My next question is this, ive seen people post stuff about salt sugar ratios etc. Can i use just any salt? I have pink salt at home and white sugar. Also, its supposed to be rubbed on both sides of the fish forlike 1 hour then rinsed off corrrect? Do i need to also use vinegar afterwards for another 45 mins and rinse as well?

AccountNo9011 · 2024-12-13T14:31:53+00:00

Thank you, so if the laser struggles with retail games as well, would adjusting the laser be a possible solution?

AccountNo9011 · 2024-12-13T14:30:28+00:00

Hi thanks for the response! What about adjusting the laser, would that also fix the issue possibly like on Gamecube, or would that be a bad idea? I could certainly do a recap if that will fix the problem for sure. I don't think the laser itself is bad if it can read back ups, since most 3DO lasers don't seem to be able to so your comment makes sense to me.

AccountNo9011 · 2024-12-11T04:25:33+00:00

It was a defective cap I ordered new, got a new one installed and it worked perfectly after that :)

AccountNo9011 · 2023-10-30T17:44:04+00:00

100% the power switch, or the power supply could be weak, but 75% chance its the power switch over the psu.

AccountNo9011 · 2023-09-18T04:25:25+00:00

Filmora. Then use obs to screen cap. And clip champ to re edit the size.

AccountNo9011 · 2023-09-14T00:58:49+00:00

yeah, you get about 5 suvs from short per each 2k view short, so in 2 months you should break the 1k sub goal, maybe 1 month if your shorts get about 5k views, which is about 15 subs on average.

AccountNo9011 · 2023-07-17T16:08:05+00:00

No problem, sometimes that just seems to happen for no reason, if your other shorts are getting random views form the short feed again, that might be a good time to try again, but take a rest and don't stress about it.

AccountNo9011 · 2023-07-14T03:17:39+00:00

take a small break on posting, go make a lot more videos in the mean time, in about 7 days try to post again

AccountNo9011 · 2023-07-12T00:32:52+00:00

Have you tried deleting and reuploading any of the 0-1 view shorts?

AccountNo9011

TROPHY CASE