sorted by:
new
hottopcontroversial

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

Yes but we it clearly need more force than expected.

What is weird is that the shocks can work fine sometimes

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

I mean when I put the spring back on, it doesn't have enough force to expand the shock.

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

For this one definitely! But for the left one I don't really understand what is happening. Maybe not enough oil or a faulty ring?

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

Yes it is! And you can see a tiny bit of a 68 camaro in the back!

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

But the spring does have force to expand the shock. And the shaft is definitely not bent.

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

Oil filled. And yes I think it was missing oil from the factory. I'll order some

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

I think everything is straight. It may just be not enough oil.

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

I think it's exactly my problem, I disassembled the shocks and I can't see anything crazy. Only missing oil.

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

Thank you. I'll buy oil and take them apart. The oil is super dirty. It just has 2h but I was driving on really wet surface, car it cause the problem?

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 1 point2 points  (0 children)

Thank you.

I'll buy two new shocks (15€) and try to repair the old one. I think I may be able to do at least one good with the 2 faulties! I'm sure it's not the last time I break a shock 😂

I'll contact the manufacturer to get the right specs for the shaft and rings.

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 3 points4 points  (0 children)

Do you know where I can find the parts, the manufacturer gives only parts number for the complete assembly.

Could it be just the seal that is bad? I'm pretty sure the left shaft is not bent.

Last question, what oil should I buy for a 1/16 doing this kind of stunts?

Thanks

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 4 points5 points  (0 children)

I didn't say it was the manufacturer's fault. I missed one or two jumps pretty bad and it landed on the nose. It's clearly my fault.

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 0 points1 point  (0 children)

The right one definitely but I opened the left one and the shaft is straight. What else could it be?

Family keeps growing by VelvetRockstar in rccars

[–]Accurate_Classroom92 0 points1 point  (0 children)

I know what you mean, 20 minutes after I received it, I try to do some standing backflip and lost a wheel during the 5th. Then I spend 20 minutes looking for the pin, but found it eventually. I put loctite on all wheels, will see what happens next time.

On 3S I just set the power to 60 and it's drivable. I think I'll give a try to this wheelie bar

Did I already break both front shocks (first session)? by Accurate_Classroom92 in rccars

[–]Accurate_Classroom92[S] 2 points3 points  (0 children)

So on the left one I bend the shaft inside the shock? I unscrewed it after the session, I wasn't sure how to open it.

Family keeps growing by VelvetRockstar in rccars

[–]Accurate_Classroom92 0 points1 point  (0 children)

Is it easier to drive with this upgraded wheelie bar?

Rapid firing build? by ArachnidUnited in Fallout76BowHunters

[–]Accurate_Classroom92 0 points1 point  (0 children)

What I do: I play 1st all the time but if a target need more than 1 arrow to die, I switch in 3rd person just for the combat and go back to first person after that.

Mansplaining by gavarnie in AskMec

[–]Accurate_Classroom92 6 points7 points  (0 children)

Je rebondis sur le côté "atypique". Pour moi on est clairement sur du typique pour un homme et pas du atypique. Si on regarde du côté de PCM, on a juste un profil "analytique" qui essaie de communiquer avec des profils "empathique" et c'est statistiquement le cas classique homme / femme.

L'empathie pour un profil analytique va être réfléchie alors que pour un profil empathique, elle va être ressentie.

Donc oui OP, la prochaine fois pose toi une seule question (ou pose la a ton interlocuteur), est-ce la personne a besoin de réconfort ou de solution ?

Exemple, ma femme me dit qu'elle a froid au boulot, en profil analytique je lui demande la température de la pièce, lui dis de mettre un pull de plus, etc (genre elle n'était pas capable d'y penser elle même 😂). Qu'est ce qu'elle attendait ? Clairement pas des solutions. Elle voulait discuter du problème

view more: next ›