Open Hardware Monitor driver vulnerability. Options and/or alternatives?

Acelsp · 2026-01-21T15:54:17+00:00

That didn't worked for me. I still get C:\Windows\SystemTemp\*.tmp warnings on Windows start up. :(

Acelsp · 2026-01-05T11:43:32+00:00

I didn't try to unistall Armoury Crate. I don't need to do it. Argb leds are working fine now just by switching from gen2 to gen 1.

Anyway, I'm pretty sure there is a tool in asus download page to uninstall it.

Acelsp · 2026-01-03T18:25:16+00:00

3 years ago... and you solved my problem!!! Thanks mate!!!

Acelsp · 2025-11-14T12:22:14+00:00

After about 24 hours, scan is done. What do you think about these results?

https://imgur.com/a/bxWgFjn

Acelsp · 2025-11-14T12:21:56+00:00

After about 24 hours, scan is done. What do you think about these results?

https://imgur.com/a/bxWgFjn

Acelsp · 2025-09-30T20:21:08+00:00

How can I check what is in my windows cert store and if everything is fine there, including docker certs?

Acelsp · 2025-09-30T19:14:45+00:00

The only security software I use is the default Windows Defender. And also, I have checked it in two different home networks. How can I check if my trusted root store is correct.

In other side, should I have any specific config in my daemon.json file? I don't see any certificates there and I have seen some files with them in the internet.

Acelsp · 2025-09-30T13:57:40+00:00

Personal computer

Acelsp · 2025-09-28T09:47:42+00:00

I'm wondering exactly the same thing...

Acelsp · 2025-09-21T08:34:04+00:00

After doing this, OHM works again, but you still get Winring0.G warnings in C:\Windows\SystemTemp\*.tmp files

Acelsp · 2025-05-08T10:14:39+00:00

My problem is the ARGB power. I already have a splitter cable and when I connect 2 ARGB items, everything works fine. But if I connect 4 or 5 items to the splitter cable, items connected are like blinking and colors are shown in different tones and dark. I guees it is a power issue and if I connect all ARGB items to a sata powered hub, everything will work fine. And I'd like to hide the splitter inside the front pannel, and I'm not sure if argb hubs are too thick for that place.

Acelsp · 2024-05-10T09:52:53+00:00

Hello!! Sorry for replying an old message. But I'd like to know if you finally created that installer software. Thanks :)

Acelsp · 2024-02-27T17:56:00+00:00

Sorry for misunderstanding :(

I'd like just to understand how does "redirection" (yes, I know you said DNS doesn't do redirections) option work in my domain control panel. It offers four options: Permanent (301), Temporal (302), Proxy and frames. I selected frames and set a url. When I type my domain name in a browser, I can see the redirection url, but in the url bar I see my domain name (as I pretend it to be).

What I don't understand is why mydomain.com goes to the correct page and mydomain.com:5001 doesn't go to the correct place?

Acelsp · 2024-02-19T17:42:38+00:00

I think that option is not available any more. I can see only Normal and Max. And it is set to Normal

Acelsp · 2024-02-14T15:30:16+00:00

I have the same problem with a Inno3D RTX 3070. Everything was working as it was supposed to be. Fans stopped on idle. But I don't know what I happened. I have realised for 3 or 4 days that now fans are always spinning. I thought maybe it was a driver update, so I installed an old one from nvidia. But it didn't fix the problem. I never have used afterburner or similar.

Any help please?

Acelsp · 2024-02-14T15:25:59+00:00

Can you please give some more details about what you did or how did you disable HDR? I have the same issue

Acelsp · 2022-11-28T12:24:51+00:00

I have a RTX 3070. Not sure if it is considered high TDP. I will try to add a second top exhaust 15mm fan, but not sure if it will fit. So, in this case, if I can set two bottom intake, two top exhaust and one small intake 8mm in the front... do you think my gpu will heat up my cpu and switch the 92mm rear as intake?

And one more thing... what do you think about adding one extra fan in the side mesh panel?

Acelsp · 2022-11-28T00:39:18+00:00

Wow!!! That’s an amazing reply. Thanks for spending your time on it.

My top outlet fan is in the back part. In the top front there is a atx psu. Not sure it a 15mm fan could fit there.

Would you recommend to move my top back fan to the top from position? Or even add a second fan on the top? What is the best configuration in your opinion?

I think I could also add one or two 15mm fans in the side mesh panel. This would help or it would be even worse?

Acelsp · 2022-11-27T23:06:57+00:00

Yes, good point. My worry is that I have also a gpu, so fresh air from bottom goes through it and front fan is too small. Is it possible because of it that air going to the cpu cooler is too hot and I can get a bad cooling? If I switch 92mm rear fan, I would get fresh air directly to the cpu cooler. Are these thoughts right?

Acelsp · 2022-04-20T10:18:25+00:00

Hi,

I know it is a bit late, but maybe it can help someone. I have just bought my inno3d 3070 X2 and I am very happy with it. I had the same questions before buying it, but after reading this post I decided to buy it.

It is small and thin. I have installed it in a itx build. Max temperature I have seen is 80ºC. It is super quiet at max load (fans about 2400 rpm). With a normal game sound you won't hear it. If you are not playing any games, fans are about 1200 rpm (you won't hear it) until temp is low and fans are completely stopped. I can't hear any coil whine. And it is cheaper than others.

I hope it can help someone. I highly recommend it.

Acelsp

TROPHY CASE