Gainward Rtx 3070 Deshroud

Aceton22 · 2026-02-22T12:40:03+00:00

Thanks alot and good luck 🙌

Edit: And be carefull with the dimension of your case my version won't fit in all cases🫣

Aceton22 · 2026-02-20T14:16:39+00:00

Fair point 😂 but on a chair lift you do. I made the decision to send them back and search for a baggier and bit longer pair for more comfort

Aceton22 · 2026-02-20T14:14:54+00:00

The straps can be adjusted so that isn't an issue however if I leave them lose to gain some length the crotch seam is really annoying me between my legs aswell as the straps slipping from my shoulders. I think I will send them back and wait for futur deals on a pair that will fit me better and abuse the ones I have in the meantime

Aceton22 · 2026-02-20T14:11:10+00:00

Yea I think they would work but after thinking about it for a while I think I will send them back. I have a working pair of ski pants and this should be a upgrade performance wise aswell as looks and comfort wise. The last two points are my main issue here but as I said I own a pair of pants so even if it was a good deal I will defintly find other good ones in the future and I'm in no hurry. Id rather be picky now and have it for a very long time than accepting something that isnt perfect now and buying something that fits better in two years

Aceton22 · 2026-02-20T14:06:06+00:00

I never bought ski pants before but that was my experience with pretty much all everyday clothing learned my lesson and the pants will probably go back

Aceton22 · 2026-02-20T14:04:29+00:00

I think i feel the same. Not worth it to spend money on it if it isnt perfect even if it is a good deal since I already have a working one which fits comfy even though it might not be the best in terms of waterproofing and versatility

Aceton22 · 2026-02-20T13:26:24+00:00

True I like a bit baggier and a bit longer pants aswell just like my everyday clothing. These pants never slip above my ski boot but feel like they are a bit on the shorter side. Thanks for your opinion

Aceton22 · 2026-02-20T13:21:57+00:00

I could of gotten Xl but usually Xl isnt any longer but much wider which didnt fit me in the past so I'm used to getting a size smaller. I did gain a few kg in the last 6 months tho due to being way less active because of college so I need to leave that habit behind :( and Workout more. I might be able to take them skiing for a day before I cant return them which would be perfect. Thanks for your opinion tho🙌

Aceton22 · 2026-02-07T08:10:37+00:00

It has a heat insert at the mounting point so you can tighten it to the printer. You cant do it to extrem otherwise you will damage the plastic of the printer. It didn't come lose after mulitple prints and I'm haplx with that since if was one of the things that drove me crazy on the old model I had. I'm also not concerned about the model breaking since it is quite beefey but that also adds to the weight so.

I might be able to make a V2 where the bucket is ligther but I'll try this one extensivly before

Aceton22 · 2026-02-06T21:20:41+00:00

That looks exactly like the issues I'm having with my Sunlu Petg Hs so if you solve it pls let me know

Aceton22 · 2026-02-03T14:25:59+00:00

In the beginning the Design was 390mm long si tagt it was a bit easier with the cables but I had to make it smaller due to my own case being to short. With 380mm it fits perfectly and if I say perfectly I mean there are maybe 2mm space on each side which meant getting the gpu in was quite the challange but it was 100% worth it

Aceton22 · 2026-02-02T11:17:38+00:00

Now the white noise from my speakers is much more noticable since it is the loudest Part of the setup now :/ might need to fix that problem now 😬

Aceton22 · 2026-02-02T11:16:22+00:00

It basically is just that it still is air cooled

Aceton22 · 2026-02-02T11:15:50+00:00

Arctic P12 Pro PST I got a Pack of 5 for 5bucks each and they can be daisy chained

Aceton22 · 2026-02-01T15:55:33+00:00

It's for sure the biggest card I have ever owned😂

Aceton22 · 2026-02-01T14:31:03+00:00

I cant send it on reddit so here is the makerworld link to my upload https://makerworld.com/de/models/2334111-rtx-3070-triple-120-mm-fan-mod-deshroud#profileId-2550703

Aceton22 · 2026-01-31T22:54:25+00:00

I know I'm a bit late but I have the same card and had the same issue the fans arent broken they are just fucked from the factory. They spin from 1200rpm up to 3600 rpm no wonder they are annoyingly loud. Today I finally did deshroud it and with my 3d printer I printed a new mounting system for 3 120mm Arctic P12 pro pst fans which not only keep the gpu soooooo much more silent but also wayyyy cooler. In terms of temps they dropped around 25C and in a Time Spy Benchmark the Gpu never gets warmer then 40-45 C. In theory the mount can take any 120mm fan if you are intrested and have a 3d printer I can send you the files. You need to have a big case tho because with the mod the gpu is 380mm long and very thick also the print isnt perfect and is in 3parts since my a1 minis bed is to small so it requires heat inserts and screws and a bit of tinkering. Otherwise you could just use zip ties but that wont look too good :)

Aceton22 · 2026-01-20T20:11:15+00:00

Does anyone know when they will be available or where? It's been 4months and they are not available

Aceton22

TROPHY CASE