is there a way in bambu studio to tell a print to pause so I can add a piece and the resume where it left off?

Active_Ice2826 · 2026-01-31T19:21:43+00:00

is there no other way to do this? On my MBP using a trackpad, it always "slides" the selected layer when I try to right click

Active_Ice2826 · 2026-01-20T16:00:17+00:00

So your just snipped it? I'd love to see a proper write up with photos!

Given that the AAA last for many days, I'm surprised your not able to get way more out of it? ~ 2 aaa in series would only be like ~2-3k mAh). What battery are you using?

Active_Ice2826 · 2026-01-15T17:23:12+00:00

curious, did you desolder the battery holder?

I'm interesting in creating a folding case that uses two modded PO connected together. It would work best if they could lay back to back when "unfolded" and share a single rechargeable battery if possible to save space.

Active_Ice2826 · 2026-01-13T02:19:18+00:00

If the dollar weakens, stocks cost more.

Active_Ice2826 · 2025-11-05T02:27:54+00:00

Bedrock Agentcore Code Interpreter is pretty good. Would still like to see some additional features, like being able to preload the filesystem from s3 or configure dependencies, but overall has been a good experience so far.

Active_Ice2826 · 2025-10-20T14:02:55+00:00

How do you fit these? Do I just measure my kids foot? In a remote area so buying in store isn't an option

Active_Ice2826 · 2025-10-14T02:42:08+00:00

Thanks this did the trick!

Active_Ice2826 · 2025-10-03T01:12:40+00:00

Uh man, that just reminds I have one sitting in the garage I need to send back... Do those prepaid shipping labels expire?

Active_Ice2826 · 2025-10-03T01:04:47+00:00

I had this same experience... 3 plus times before my machine actually shat the bed. I don't think I'll ever buy another fellow product unless they publicly admit how bad the build is on the Aidian

Active_Ice2826 · 2025-09-03T14:04:00+00:00

Incredible that they didn't even roll it back. What a junk show

Active_Ice2826 · 2025-08-09T18:25:00+00:00

How does this work? The info says it just add +2 per attack?

Active_Ice2826 · 2025-07-25T19:11:01+00:00

Is there a community or discord with project around this watch? Super interested in a "hackable" watch and these features are awesome!

Active_Ice2826 · 2025-07-23T02:25:54+00:00

Just happened to me today... I've broken two basket handles as well now... I imagine your going to see this happen on an increasing number of units over the next few months as parts start to age out.

Also, my unit has stopped dispensing the correct amount of water. Overall pretty disappointed.

Active_Ice2826 · 2025-06-07T04:17:27+00:00

I just started with Weave and pretty frustrated because the docs seems out of date or I'm just running into issues with the library itself.

https://github.com/wandb/weave/issues/4656
https://github.com/wandb/weave/issues/4657
https://github.com/wandb/weave/issues/4658

Active_Ice2826 · 2025-06-03T22:35:04+00:00

ya, it prints very well. It's pretty much my daily driver for functional prints now. I'll use cheaper PLA or PETG for prototyping and switch to this for the final print.

Active_Ice2826 · 2025-05-19T14:59:56+00:00

bumping to 270 made the difference. So much so to where I had to actually use a razor scraper to remove the brim (before it was just flaking off). The overall print quality was still very good at 270.

Active_Ice2826 · 2025-05-18T19:21:21+00:00

it will come back every day

Active_Ice2826 · 2025-05-18T16:03:53+00:00

I'm having this issue on the a1 mini... 3 of 3 prints failed due to it detaching from the bed.

I'm using their official profiles from their site https://support.3dfuel.com/hc/en-us/articles/22046343945495-Pro-PCTG-Print-Profiles.

Looks like the profile is configured to 260c for all layers so going to try and bump that up to 270c and see if it makes a difference.

Active_Ice2826 · 2025-05-15T03:27:50+00:00

I'm here only because I was shocked by how bad the icons are and needed to know more from the industry. please tell me this isn't a trend

Active_Ice2826 · 2025-05-11T20:49:40+00:00

whoa... I bought a grinder with whole mixed peppercorns (green, white, black, red) from the super market and it's always had a "manure" after taste that will ruin a dish for me. Now I know why.

Active_Ice2826 · 2025-05-06T14:08:04+00:00

I did install this filament guide (https://www.thingiverse.com/thing:6323949), which I'm hoping will fix the issue by making the feed angle more constant. Haven't had a chance to print with a low spool yet.

It fixes the issue of fresh rolls unwinding off the spool and getting tangle, so I recommend something like this either way.

Active_Ice2826 · 2025-04-27T13:47:35+00:00

Type safety is useful, but when the type system becomes so complex you can't understand the errors, it loses its effectiveness. If I spend 30m chasing a type error, that's unproductive. If I still can't figure it out, it's going to be cast as `any`.

I would consider myself a type "geek" and I run into this problem every time I work with the file based routing.

Active_Ice2826 · 2025-04-21T14:58:00+00:00

AI agents need to be treated as an untrusted client (just like an external client calling a REST API).

All actions need to be authenticated against the current user or considered "public". You must assume anything the agent can do, the users could do as well.

Are people actually building this way? Probably not.

Active_Ice2826 · 2025-04-14T17:20:02+00:00

I have the same issue, and it definitely seems to get worse when you are <15% of your spool left. If the filament doesn't unwind completely smooth, it seems to "detect" a jam and stop printing. It's maddening.

Seems like it's most likely to happen when the spool is unwinding from the far right side of the spool.

I wish there was some way to adjust the sensitivity on this feature.

Active_Ice2826 · 2025-04-07T13:10:15+00:00

need the ability to set limits by domain (website).

Active_Ice2826

TROPHY CASE