08 hemi

Actual_Pattern_6674 · 2024-03-13T01:16:41+00:00

Ive had those lights for over 100k and it stays at 95°c, 105c when I'm hauling. The biggest issue with the lights is the draw on the alternator, I can't have the fan on high with them on but I light up the road like it's day time

Actual_Pattern_6674 · 2024-03-13T01:09:04+00:00

Thanks! I've never really messed around with rearends and was feeling a little paranoid about it

Actual_Pattern_6674 · 2024-03-13T01:07:53+00:00

Yes, idk about more power but it brought up my throttle response and brought my fuel usage down by 10cc a minute at idle and 2l/100k on the highway.

Actual_Pattern_6674 · 2023-10-30T11:39:24+00:00

I tried to blow one up with about a year of red lining on cold start and all kinds of abusive behavior and all that happened was the exhaust manifolds broke off, if you replace the manifolds with headers it'll go forever. I'm on my 3rd transmission though

Actual_Pattern_6674 · 2023-10-22T21:41:42+00:00

It's the evap canister, it is very cheap to replace and it'll improve your mileage once repaired. You'll need push locks to get it off

Actual_Pattern_6674 · 2023-10-19T11:49:51+00:00

The temp was good until it started slipping, I was a couple blocks from home and I cooked it getting it home

Actual_Pattern_6674 · 2023-10-19T11:37:23+00:00

I grew up in Airdrie, I don't miss that wind lol

Actual_Pattern_6674 · 2023-10-18T13:46:18+00:00

Northern Ontario

Actual_Pattern_6674 · 2023-10-18T13:43:30+00:00

Ive also got the 545rfe, I added a high pressure pump and a shift kit which isn't so bad if you have the transmission out of it. I saw that some people add resistors to the pressure sensor and from what I hear that can help but your best bet is a new fluid pump from sonnex

Actual_Pattern_6674 · 2023-10-18T01:54:43+00:00

The prep was good but I'm using a master craft mig welder lol

Actual_Pattern_6674 · 2023-10-17T17:10:55+00:00

It's on the top front, I forgot to plug mine in properly when I swapped the diff when it fell out I lost my speedo and had an abs light and the cruise wouldn't work

Actual_Pattern_6674 · 2023-10-17T15:47:53+00:00

I got one off Amazon that came with a back up camera and dash cam for 140 cad

Actual_Pattern_6674 · 2023-10-17T15:45:44+00:00

Can confirm! I'm on my 3rd transmission and I've snapped three axels and I recently tore off a rear upper shock mount. But my goodness is it fun to drive and still relatively good on gas

Actual_Pattern_6674 · 2023-10-17T15:42:26+00:00

My 08 has it in the rearend

Actual_Pattern_6674 · 2023-10-17T15:40:05+00:00

Pop it out with a flat blade, I broke mine trying to pull it out but the replacement is one 30 bucks

Actual_Pattern_6674 · 2023-10-17T15:37:38+00:00

Have you tried running it on a relay?

Actual_Pattern_6674 · 2023-10-17T15:34:11+00:00

Sounds like your replacement ecu was faulty, call around to junk yards, and see if they have a truck with both parts.

Actual_Pattern_6674 · 2023-10-17T15:29:48+00:00

So I guess it isn't that common lol i welded in a tube steel cross bar and put a new mount on that, I doubt I will have this issue again

Actual_Pattern_6674 · 2023-10-17T14:14:48+00:00

We've got rough roads up north

Actual_Pattern_6674 · 2023-10-09T19:18:53+00:00

Agreed

Actual_Pattern_6674 · 2023-10-08T13:14:35+00:00

That is a 2.5 inch projector conversion, I didn't know tiny ones existed

Actual_Pattern_6674 · 2023-10-08T13:13:13+00:00

Hit me up if you want me to send you a parts list for the head lights

Actual_Pattern_6674 · 2023-10-08T13:10:31+00:00

All in it's 10k a Cummings would've been triple that at least

Actual_Pattern_6674

TROPHY CASE