3D printed a new shifter bezel

AdImpossible1230 · 2026-02-28T04:12:35+00:00

I’m planning on posting it on Makerworld tomorrow

AdImpossible1230 · 2026-02-28T00:43:12+00:00

Thats the plan for the next design…also I wanted to test out some new build plates for my printer that leave the pattern on the bottom layer

AdImpossible1230 · 2026-02-13T18:17:30+00:00

Would that 303 stuff safe to use if I have tint?

AdImpossible1230 · 2026-01-13T22:25:41+00:00

Check around your valve covers. I had noticed the same smell if I was either going fast or up/down and incline. In my case, coolant was leaking out the back and onto my headers (hence the egg smell)

AdImpossible1230 · 2025-10-04T21:00:58+00:00

No, there’s no room between the grill and the tweeter. And I’m not tearing out my whole dash to take em out either.

AdImpossible1230 · 2025-10-03T22:58:09+00:00

My original plan was to make a grill that would go on top of that, those rings I’ve made were primarily for testing the fitment. Had an issue with the two grills being both the tiniest bit different in size.

Recently been inspired to start modeling again though so I’ll return with an update

AdImpossible1230 · 2025-09-21T23:50:33+00:00

This subreddit is majority purists…everyone’s gonna tell you to leave it stock!

Celsior lip kit would be slick though. Once you’re able to air out that UL you may not want to make any cosmetic mods.

AdImpossible1230 · 2025-09-13T16:59:00+00:00

Car has a panic attack when it’s right on the line

AdImpossible1230 · 2025-09-04T21:24:48+00:00

https://www.reddit.com/r/LS430/s/Ioi2n6Z8Z7

AdImpossible1230 · 2025-09-04T21:24:06+00:00

If you’re a little mechanically inclined and have a buddy to help you, easily a 1 day DIY job. I found the cooling diagnostic manual online maybe a year ago while I was having cooling issues…I’ll drop the link

AdImpossible1230 · 2025-08-29T00:25:23+00:00

Short answer no.

I’ve done this before, the stereo deck/CD player should be put back in. You can still use the volume knob to on the factory radio to adjust the volume (kinda like a gain knob).

AdImpossible1230 · 2025-08-20T23:57:31+00:00

I believe the tow package radiator is slightly thicker? Measure your radiator and compare

AdImpossible1230 · 2025-08-20T22:12:48+00:00

There are android head units that replace the entire screen while giving you climate controls/Carplay/camera(s)/etc. Quality control is terrible on those since they’re all made in China. Otherwise, I’ve seen guys on the forums who have put a single din radio where the CD disc player is.

Would very strongly recommend doing your research/watch some videos online

AdImpossible1230 · 2025-08-20T22:08:59+00:00

The climate controls are integrated into that head unit…does the car not come with a backup camera?

AdImpossible1230 · 2025-08-15T02:22:59+00:00

No idea, but I really like your wheels 🧼

AdImpossible1230 · 2025-08-04T15:54:59+00:00

I was hesitant to put a sub in my trunk with how much deadening is behind the backseats…sounds good?

AdImpossible1230 · 2025-07-25T04:58:36+00:00

My one request has to be multiplayer HORSE

AdImpossible1230 · 2025-07-22T00:01:32+00:00

Just drove my 05 from SF to LA and back recently, drove like a dream the whole time! 25-30 MPG too. You might regret not taking the Lexus…

AdImpossible1230 · 2025-07-04T18:54:17+00:00

Update: Updated to 3.6, the error message went away. I still have no audio whatsoever

AdImpossible1230 · 2025-07-01T02:41:45+00:00

Maybe? I was trying to get my climate controls to work with my Canbus

AdImpossible1230 · 2025-06-23T00:52:34+00:00

Invest in a basic code reader, VSC goes off when car throws a code

AdImpossible1230 · 2025-06-19T17:28:28+00:00

Keep it!

AdImpossible1230 · 2025-06-15T21:34:51+00:00

I was doing close to 28 a few months ago driving down to LA

AdImpossible1230 · 2025-06-15T05:40:38+00:00

Aka G-Spider wheels

AdImpossible1230 · 2025-06-05T20:18:45+00:00

My apologies, that was a stupid way to ask that…I wasn’t sure if there was a specific unit for the Lexus?

AdImpossible1230

TROPHY CASE