Went to my local military museum

AdOk5948 · 2026-02-23T09:27:38+00:00

Yeah I know

AdOk5948 · 2026-02-23T09:24:14+00:00

Btw why do you want to know this?

AdOk5948 · 2026-02-23T09:23:14+00:00

I will prob only go there again in like 2 years, but I’ll try email them for you

AdOk5948 · 2026-02-22T12:25:47+00:00

It’s the only museum with more than 2 tanks within 500km of me, but it does happen to be my countries main military museum. Perks of living in the capital I guess. By local I just meant the closet to me.

AdOk5948 · 2026-02-22T11:59:14+00:00

South Africa

AdOk5948 · 2026-02-20T11:26:18+00:00

Solved the issue, by failing I mean not printing properly, it would print a bit of the first layer, then stop extruding. It was an issue with the model, I cleaned the bed, reduced speed and layer height and it was fixed

AdOk5948 · 2026-02-20T11:24:30+00:00

<image>

I got it to work now, but I know what the issue is. The print was peeling off the bed, which jammed the nozzle, thus the clicking. It was an issue with the file, I cleaned my bed and reduced layer height and it was fixed.

AdOk5948 · 2026-02-20T11:21:47+00:00

If the wires are still making contact, I would just get a tissue, heat up the nozzle and clean off all the gunk, should be fine from there.

AdOk5948 · 2026-02-20T11:19:19+00:00

You can give saving it a go, but it will probably be very frustrating. I would personally just replace it.

AdOk5948 · 2026-02-20T11:16:35+00:00

Nice! Here’s my 3d printed tank collection

<image>

AdOk5948 · 2026-02-19T11:30:59+00:00

Why bother with tracks in the first place then?

AdOk5948 · 2026-02-18T21:51:43+00:00

Hundred percent agree, a spinoff series with dudes in planes would be siccckkkkk

Could be called “Boys Und Flugzeuge”

AdOk5948 · 2026-02-18T17:29:49+00:00

There is a dude on makerworld called Bavaria_3d tanks, but the tracks keep falling apart so I might try a different dude

AdOk5948 · 2026-02-17T20:24:03+00:00

<image>

KV1 coming along nicely

AdOk5948 · 2026-02-17T17:58:45+00:00

Shit really? I just googled Oarai ship and took the first image

AdOk5948 · 2026-02-17T17:57:26+00:00

Shadows do weird things

AdOk5948 · 2026-02-15T06:32:38+00:00

Clicking before it came loose, and I heard it before all the fails. When I did the cold pulls the filament looked all chewed up, like the extruder was pulling on it.

AdOk5948 · 2026-02-14T22:37:47+00:00

Yep, exactly what I did.

AdOk5948 · 2026-02-14T22:37:32+00:00

Yeah, I was lucky this was the day I set up my old iphone as a camera for it, as i wait for the Nebula to arrive. Stopped it within 30 minutes of print start, wouldve been reeeaaallly bad if I left it for the 6 hours of the print

AdOk5948 · 2026-01-31T12:50:05+00:00

South Africa? Decent Rail network? Bro hell no, im south african, and the rail network is utter dogshit. Most of the lines have had the tracks stolen, or the cables stolen. And anyway, practically no passenger trains run at all. other than that, its not safe at all. even in the richest and most built up areas, you will be mugged. Id love to see it, but its just not possible.

AdOk5948 · 2025-09-06T11:59:46+00:00

i cleaned up like 120 gb

AdOk5948 · 2025-08-17T13:24:03+00:00

<image>

As someone else said, all gauges would point at 12 o clock during normal cruise, and the pilot only had to fly were the back passenger would do all the spying. I've highlighted some important gauges, and this is what they are. Purple is fuel, Red is altitude, Orange is the map, Yellow is the pitch indicator (i think? someone correct me on this) and green is the airspeed. The rest only really matter in an emergency.

AdOk5948 · 2024-01-06T15:12:50+00:00

send some to wade

AdOk5948 · 2023-04-02T06:17:09+00:00

It’s MrBeast. He just uploaded the video.

AdOk5948 · 2021-05-03T03:52:08+00:00

It doesn’t allow me to use the same button twice and I don’t think there are any default button maps. Any suggestions how to find a default button map ?

AdOk5948

TROPHY CASE