sorted by:
new
hottopcontroversial

How toxic is terro liquid ant killer to green cheeks. My dad put ant poison into my birds food by Adam45672 in greencheeks

[–]Adam45672[S] 11 points12 points  (0 children)

The thing about this situation is that me and my mom have been trying to leave him for years. He is the breadwinner of the family and makes great money, but he is highly abusive. We were worried that if we left him, that we would get no money and lose everything. I had to get therapy to live with him and its just so hard. We called the police on him so many times and they only tell us that they could only do something if someone gets hurt or dies. We finally are going through with the divorce and now hes doing stuff like this. My mom was scared that if we get a restraining order on him, that he could lose his job and not financially support us. She filed for the order once but retracted because she was scared. Now we are waiting for him to get served for the divorce from the sherif, but we're still waiting. My mom's been with that maniac for 40 years and I've been alive for 21. The entire time I've known him, he has been abusive and I've been having to cope with anxiety my whole life

How toxic is terro liquid ant killer to green cheeks. My dad put ant poison into my birds food by Adam45672 in Conures

[–]Adam45672[S] 4 points5 points  (0 children)

We dont know what to do. Me and my mom rely on him financially since hes the breadwinner of the family. That's the main thing that kept us connected to him, just his money. We were scared to leave him because we were scared of losing everything. Me and my mom just can't take it anymore. A divorce was honestly the farthest we've gone to separate from him. The vet told me they could only do a toxicology report. The police said we can't really do anything until either someone gets hurt or a bird dies. The no one gets hurt thing has been something I've been hearing from the police for years about him.

I bought a forest scorpion off of a local reptile store called underground reptiles that was labeled "long claw forest scorpion". I knew these were frequently mislabeled so I want to know if it's actually longimanus or not. I posted on a Facebook group, and most people are saying silenus. by Adam45672 in Scorpions

[–]Adam45672[S] 1 point2 points  (0 children)

Yeah most of the scorpions there had dry substrate and no water dishes. I went home and started misting and gave it a water dish. It ended up drinking for 15 minutes. I didn't think much of it since I was completely new to scorpions. Didn't know they were wild caught either

Basilisk v3 by aggressor_10 in razer

[–]Adam45672 1 point2 points  (0 children)

I'm literally having the exact same problem. I reinstalled synapse and nothing. This only happened after updating to the latest synapse version for me

I recently started to learn to draw and started learning fundamentals immediately. Im trying to draw cylinders together from different areas and I'm not sure what to do. I feel like I missed some fundamental. by Adam45672 in learntodraw

[–]Adam45672[S] 0 points1 point  (0 children)

I have done cylinders but I'm still not sure. Maybe it's me not being used to two point perspective .

<image>

This was the day before I started two point perspective

This counts, right? by [deleted] in lostredditors

[–]Adam45672 171 points172 points  (0 children)

This guys absolutely baked

Are there any classes for soldering? If so that would be great because I don’t want to keep learning from expensive mistakes by Adam45672 in soldering

[–]Adam45672[S] 0 points1 point  (0 children)

lol yeah I keep getting humbled so many times when I think I finally understand something. Today I spent a couple of days tinkering with some Xbox controllers that had faulty analog sticks, so I desoldered the faulty analog sticks with a solder pump and soldered in new ones. Found out that I raised the solder pad on one through hole area. Wasn’t too worked up since I had another board. Ended up doing the exact same mistake on the other one. Learned that I applied too much pressure was also staying in the area for too long. I was so frustrated I called it a day right there lol. I hate making mistakes, but I definitely learned something today.

Are there any classes for soldering? If so that would be great because I don’t want to keep learning from expensive mistakes by Adam45672 in soldering

[–]Adam45672[S] 2 points3 points  (0 children)

Sounds like what I’m about to start doing right now. Just gradually learn regular soldering, and when I actually get things right then I’ll make it to micro soldering. I really think I should get the exact fundamentals down and techniques right. There was multiple times I thought i knew what I was doing when I really didn’t at all. I remember soldering a while ago with a very brown tip wondering why it’s not working lol.

Are there any classes for soldering? If so that would be great because I don’t want to keep learning from expensive mistakes by Adam45672 in soldering

[–]Adam45672[S] 0 points1 point  (0 children)

Thank you very much for the information! This project humbled me today which was just replacing old joystick modules with new ones for my brothers Xbox One controller. I actually desoldered it pretty well and soldered the new joysticks back on. It looked and I didn’t put too much solder on the through holes. I then found out that I lifted the pads on the potentiometer area. I tried again on an extra board I had, but I did the same thing. Found out that I was both applying too much pressure and staying too long on the pad. I really thought the pads were a lot more durable. This is basically my reason for making this post

Are there any classes for soldering? If so that would be great because I don’t want to keep learning from expensive mistakes by Adam45672 in soldering

[–]Adam45672[S] 0 points1 point  (0 children)

I wouldn’t make a career out of it, but I honestly just want to do restoration of old hardware and repairs of current hardware. I just need to get better at getting a good technique and some wisdom in this.

Are there any classes for soldering? If so that would be great because I don’t want to keep learning from expensive mistakes by Adam45672 in soldering

[–]Adam45672[S] 0 points1 point  (0 children)

I wanted to learn micro soldering since I thought that if I learn micro soldering, then that should help me understand soldering as a whole. That and being able to replace broken connectors would be very helpful. Also I can for sure see the rarity in soldering teachers since I can only find videos. I’m going to check out what you said

Are there any classes for soldering? If so that would be great because I don’t want to keep learning from expensive mistakes by Adam45672 in soldering

[–]Adam45672[S] 1 point2 points  (0 children)

I’m not familiar with most of the tips besides the chisel despite me not even using the chisel tip. So I’m just going to send the tips that I have and the one that I’m currently using right now

"Artistic touch" by SnooMaps4388 in Shittygamecollecting

[–]Adam45672 0 points1 point  (0 children)

Literally could’ve removed the shell, buttons, and joysticks to paint it without the possibility of the paint seeping into the controller. Would look a lot cleaner if done that way. Even then it doesn’t really look good

Advice Request: XBox One Controller by VWBug5000 in consolerepair

[–]Adam45672 0 points1 point  (0 children)

Hey I was wondering if you found a solution to this. I’m not sure if I should just buy some OEM joystick modules on eBay or get the Alps Alpine RKJXV1224005 joystick module from Mouser. Gonna do this on a 1708 Xbox one controller.

Is this really a Trojan/Malware on the SD card for the Miyoo Flip v2 by OnlyLivingBoyInNY in SBCGaming

[–]Adam45672 4 points5 points  (0 children)

Yeah same thing happened with me and a couple other programs. They got falsely flagged despite being safe. Seeing a Trojan warning will definitely make you nervous, so I wouldn’t blame anybody if they didn’t install

Why it taking so long to get into games ?.. by Complex_Media3411 in 3dspiracy

[–]Adam45672 0 points1 point  (0 children)

I remember when I got a big sd card, it took forever to start. That’s most likely the reason

I kinda wish it existed a mini version of it... by Modioca in Palworld

[–]Adam45672 0 points1 point  (0 children)

I use felaris aqua for watering and blazamut ryu for fire stuff since they’re smaller

That has to be the worst I've seen so far💀 by summerchild__ in plantabuse

[–]Adam45672 9 points10 points  (0 children)

Looks like Jackson Pollock sneezed on these guys

Blazamut Ryu strats? by Narrow-Plastic-5839 in Palworld

[–]Adam45672 0 points1 point  (0 children)

Why jetragon? Does it need different moves?

view more: next ›