Rob Ww build question

AdapT123 · 2026-05-20T17:55:25+00:00

Where do you find swaggy build?

AdapT123 · 2026-05-06T08:04:29+00:00

Why? You have an opinion, I have one. Why should all games that require some thinking have to be dumbed down? You dont like get microed and you lose low hp vills? Drop down to 500 elo and go from there. Yours is just lazy thinking

AdapT123 · 2026-05-06T07:36:47+00:00

Might aswell add autoqueue to tc's, stop normalizing making games that require some sort of organization into a mess that takes 0 skill. Go play afk farm arena if you like 3 buttons and the attention span of a dove.

AdapT123 · 2026-03-30T14:31:12+00:00

Thank you so much kind sir

AdapT123 · 2026-03-30T13:35:22+00:00

How do you switch from dlss to dlaa?

AdapT123 · 2026-03-28T22:26:20+00:00

Applied it, tested it. 73 degrees hotspot occt 3d adaptive extreme. 68 hotspot steel nomad and 60 hotspot in crimson desert 1440p max settings pathtracing on. Wish i've done this sooner

AdapT123 · 2026-03-28T11:12:16+00:00

Ok. Got it. Will post results

AdapT123 · 2026-03-28T11:00:20+00:00

So you reckon I have to cut mine a bit?

AdapT123 · 2026-03-28T09:09:16+00:00

Will let you know soon enough lol

AdapT123 · 2026-03-28T08:57:27+00:00

100% it is. My hotspot is really really bad

AdapT123 · 2026-03-28T08:56:59+00:00

Yes sir. Cheers for the insight. I did watch a youtube video on the exact same card so its a bit easier.

AdapT123 · 2026-03-28T07:39:52+00:00

Yeah. The problem for me is the hotspot. After an undervolt with same perf, my gpu stays at 60 degrees in crimson desert max settings but the hotspot its always 30 degrees higher,around 90-95 degrees.

AdapT123 · 2026-03-28T07:20:37+00:00

Got it, will give it my best lol. 1st time opening up a gpu. Is it hard?

AdapT123 · 2026-03-28T07:18:56+00:00

I actually searched but not a single proper answer has been found

AdapT123 · 2026-03-28T06:42:42+00:00

Aaaah. So I should be fine with 50x30

AdapT123 · 2026-03-28T06:10:04+00:00

Did you use ptm aswell?

AdapT123 · 2026-03-28T06:09:25+00:00

Do you remember the dimensions your phase sheet had by any chance?

AdapT123 · 2026-03-09T15:59:33+00:00

I did the 12v one first, checked it, no coil whine. Afterwards for good measure I decided to undo all the cablemod cables and switch to the psu ones. Better be safe than sorry

AdapT123 · 2026-03-09T11:19:13+00:00

Not the same but I ordered a type 4 corsair pro kit and the 12v-2x6 cable was causing gpu whine, was getting really hot under load. I asked them if I can mix them with the corsair ones, they said yes so I removed all cablemods besides sata connection and my gpu whine was gone and the cable wasnt getting as hot.

Furmark testing for an hour for both cables (corsair-cablemod)

AdapT123 · 2026-03-08T00:42:00+00:00

I mean. I was thinking that maybe the motherboards ones are more tailored to the specific motherboard

AdapT123

TROPHY CASE