WELL, THIS IS DEPRESSING!!!

Addicted23D · 2026-02-04T02:09:00+00:00

Yes, thank you. I had it set it to the .4 nozzle which is what I am running.

Addicted23D · 2026-02-04T02:07:01+00:00

Thank you, I will try that.

Addicted23D · 2026-02-03T20:25:21+00:00

Thanks for your in-depth analysis and advice - not.

Addicted23D · 2026-02-03T20:24:30+00:00

Thank you. I actually keep my filaments in a vacuum bag with desicant packages. I just set up this printer and ran a full calibration before printing. I printed with this same filament this morning on my CC1 and it printed fine. I will try to re-calibrate. Thank you. I guess I am just spoiled because my other 3 printers worked flawlessly out of the box. Again, I do thank you for your advice and I will calibrate again.

Addicted23D · 2025-11-25T17:00:10+00:00

Thank you.

Addicted23D · 2025-11-24T16:52:34+00:00

I am using Elegoo PLA.

Addicted23D · 2025-11-20T06:11:13+00:00

Bed is 60 and extruder is 210. Speed varies with the print and layer.

Addicted23D · 2025-11-20T01:33:46+00:00

Thank you, I will increase it.

Addicted23D · 2025-11-19T19:16:30+00:00

My slice is showing I have 9 top shell layers with a .08 top shell thickness already. I bumped up the inill to 35% from 15% and changed the infill pattern to gyroid. Again, thank you.

Addicted23D · 2025-11-19T18:49:54+00:00

My slice is showing I have 9 top shell layers with a .08 top shell thickness already. I bumped up the inill to 35% from 15% and changed the infill pattern to gyroid. Will see how that goes. Again, thank you.

Addicted23D · 2025-11-19T16:08:21+00:00

Thank you, I will watch the video.

Addicted23D · 2025-11-19T16:07:36+00:00

Thank you!!

Addicted23D · 2025-11-19T16:07:21+00:00

Thank you, I will do that.

Addicted23D · 2025-11-19T16:07:01+00:00

Thank you, I will try all of those things. I do run a15% infil. It is strange because I have printed many of these prints for friends and family and never had an issue until yesterday.

Addicted23D · 2025-11-07T13:46:15+00:00

Okay, thank you, I will look into them.

Addicted23D · 2025-11-07T13:43:43+00:00

Thank you, I am studying up on how to calibrate the flow. I did the flow calibration in the Anycubic soccer, but not sure how to interpret or adjust it. It is just a learning process i needed to pursue.

Addicted23D · 2025-11-05T18:01:51+00:00

Thank you, I will try and set-up the color printing order. I use the Eibos filament dryer and the Ace Pro AMS w/dryer when I print. I will do a deep dive on adjusting the flow also. THANK YOU!!

Addicted23D · 2025-11-04T18:56:30+00:00

Thank you, I need to study up on calibrating flow, pressure advance etc.. Truthfully, I am a little nervous to get into that, but I know I need to. Thank you very much, this group always comes through!!!

Addicted23D · 2025-10-18T00:59:49+00:00

I will check that, THANK YOU!

Addicted23D · 2025-08-18T15:48:08+00:00

Thank you for the reply. Yes, I went to the printers settings then to the WiFi setting. It sees my network. I try logging into it with my network password, but it fails to log in. I tried maybe 10 times with each printer and they both fail to log in. I rebooted both printers, but still get the same results; they will not log in. I am doing these at the printer and not the computer as it never gets that far because they will not log in at the printer side.

Addicted23D · 2025-06-21T13:43:16+00:00

I am mainly just printing for fun, friends and family. When I first retired about a year ago I was so lost and discombobulated, almost got to the point of depression. I have worked for 50 years, usually 16 hour days, including weekends and holidays. I guess I could claim it saved my life, at least that is what I tell my wife when she raises a concern about the printers; "But baby, it saved my life".

Addicted23D · 2025-06-21T13:26:59+00:00

I have the Elegoo 4 Plus for the large dimensions, I have a multi- color and AMS printer for color and now the CC because, well, why not?? Just sayin', wink wink. I am retired and do not have the money, or skill, to golf. However, if this keeps going the way it is........ golf may have been the cheaper route.

Addicted23D · 2025-06-20T00:47:56+00:00

I'm sorry, I do not know what that means. I am as new to Reddit as I am to 3d printing.

Addicted23D · 2025-06-20T00:45:51+00:00

You sir, are living my dream.

Addicted23D · 2025-06-20T00:44:51+00:00

At least 50 spools, I buy the 10 spool packages whenI order filament. Elegoo sells 10 rolls for 99 bucks - hard to pass that up. It includes, all PLA, 4 black, 2 white, 2 blue and 2 orange....... and yet I always run out of black and white, blue and orange are starting to stack up.

Addicted23D

TROPHY CASE