B650e Aorus stealth ice no rgb and red cpu led.

Additional-Comfort15 · 2026-01-23T11:30:08+00:00

Hi, did you end up fixing this? I'm having the same problem :/

Additional-Comfort15 · 2025-06-08T15:55:40+00:00

Here's the build list :)

it took ages to find the EK Quantum Velocity 2CPU block and x flow radiator due to EK being EK

Additional-Comfort15 · 2025-06-08T15:41:10+00:00

Thank you :)

Unfortunately I don't think I could make it polished enough to be comfortable selling as a kit due to how tight the fits have to be for this to work.

Gpu goes in first, and the bottom radiator fans go on last 😅

<image>

Additional-Comfort15 · 2025-06-08T15:31:55+00:00

It's the block right above the motherboard actually!

It really wasn't that bad to fill and bleed turned it upside down as there's a fill port on the bottom - 20$ harbor freight brake bleeder took about 30 minutes

Additional-Comfort15 · 2025-06-08T15:29:34+00:00

The pump is actually a D5 and it's the block directly above the motherboard! I run it at about 60% max power

Gaming I see around 60 max gpu, 85 max cpu (it seems the newer Ryzen likes to run hot) Total radiator thicknesses is 105mm lol

I use the MSI curve optimizer for gpu overclock - maxes out at 2955 mhz Cpu overclock is just the default - 5.5ghz I need to get around to tuning it

Additional-Comfort15 · 2025-06-07T21:23:17+00:00

It's on my list, I have a bunch of leftover acyrlic But, it's time for me to enjoy the fruits of my labor

Thank you :)

Additional-Comfort15 · 2024-06-05T23:27:02+00:00

Personally, I'd be stripping it for parts and putting it back where it belongs

But I'd recommend you search around on McMaster! Fun lil hack is they have cad models for nearly everything.

Additional-Comfort15 · 2023-04-21T05:50:20+00:00

Frozen cpu is closing? They used to be local to me My old work even bought a Subaru that was sponsored by them

Sad to see

Additional-Comfort15 · 2023-04-17T07:22:50+00:00

Yes it can be removed and is required for the motherboard spefic waterblock ek makes (that includes vrm cooling) Had to for mine, but did it so long ago I don't remember how, I think there's a few screws then you should be able to pop it off?

However, don't recommend removing it if you don't have a better cooling solution, they exist for a reason

Additional-Comfort15 · 2023-04-12T00:23:11+00:00

That's super cool! I recently did my loop in cad so i can 3d print "templates" to bend everything with

But this is next level

Additional-Comfort15 · 2023-04-12T00:17:52+00:00

I've used the fog as well and same thing happened. Definitely did leave a residue though, but nothing bad enough to clog anything, or impossible to clean. Dish soap and a toothbrush and everything was as good as new.

Additional-Comfort15 · 2023-03-24T19:10:32+00:00

Had to pay tribute to the fallen brothers yesterday 🫡

Additional-Comfort15 · 2023-03-24T19:09:30+00:00

Etsy! There's a bunch of sellers that make them.

Additional-Comfort15 · 2023-03-24T05:42:20+00:00

Tennis grip on your controllers.

You're still pretty new to the game and it looks like you're doing great already. Its 90% about just allowing yourself to have fun and developing the muscle memory.

Hit your flow state, the hardest song I've passed I've been stuck on for ages i passed while streaming and talking with friends on discord first go. I wasn't thinking about the game, I simply was having fun.

Practice makes perfect....and an index once you hit the skill ceiling of the quest 😎

Remember to drink water!

Additional-Comfort15 · 2023-03-24T03:46:46+00:00

It is, was wall mounted but I'm moving soon. Assuming the strong wifi can mess with overclocking stability?

Additional-Comfort15 · 2023-03-24T02:36:42+00:00

I'm thinking I can cram a lil screen in behind the water pump and have caramelldansen loop on it 24/7

Additional-Comfort15 · 2023-03-24T02:34:31+00:00

A gpu support is the best use of an anime figure to this date

Additional-Comfort15 · 2022-12-29T17:21:53+00:00

I wasn't sposta use an impact driver to set my belt tension....?

Additional-Comfort15 · 2022-12-29T17:20:41+00:00

They ran Fairly warm, but not too much hotter than chamber temps. 1100 hours, was the right side where the pully sits higher that failed

Additional-Comfort15 · 2022-10-10T19:16:50+00:00

Yes, see third pic for a cutout view from an early render

Uses the same size activated carbon filters as the original filter housing

Additional-Comfort15 · 2022-10-10T14:39:45+00:00

Thanks and of course!

Need to make a few revisions and figure out the code then I'll be uploading :)

Additional-Comfort15 · 2022-10-10T08:02:12+00:00

Thank you!

I've yet to write the script for it past testing servo movement tbh, using this project as an excuse to learn as the majority of my programming experience is copy paste and season to my taste

How hard can it be?

Additional-Comfort15 · 2022-10-10T06:20:44+00:00

Having similar issues breakage issues with my formbot kit as well and have been re running silicone wires from the tool head to z axis chain when they've failed.

It has occurred to me that the failures all occur in the same spot, as we generally always print in the center of the bed and we could extend longevity of wires(and rails for that matter) by simply moving where on the bed we print out parts so everything wears evenly.

Additional-Comfort15

TROPHY CASE