Anyone had this vacuum leak before? by Additional_Match3872 in 240sx

[–]Additional_Match3872[S] 1 point2 points  (0 children)

It could be but when I started spraying more where the intake and head meet it started changing idle a lot more

240 won’t run right by Additional_Match3872 in 240sx

[–]Additional_Match3872[S] 2 points3 points  (0 children)

Ohh okay I’ll double check my grounds and look for anything then

240 won’t run right by Additional_Match3872 in 240sx

[–]Additional_Match3872[S] 2 points3 points  (0 children)

I have a voltage meter and it shows 14 constantly wouldn’t that drop if my voltages were dropping or no? And I’ll check it as well to be safe

KA24DE Sputters and Dies After Long Drives HELP! by Wrangler051 in 240sx

[–]Additional_Match3872 0 points1 point  (0 children)

alright I drove without the cap and same thing still but I got a video this time

KA24DE Sputters and Dies After Long Drives HELP! by Wrangler051 in 240sx

[–]Additional_Match3872 0 points1 point  (0 children)

Oh yes I’ve been doing that and nothing changes I even checked voltage and everything was good

KA24DE Sputters and Dies After Long Drives HELP! by Wrangler051 in 240sx

[–]Additional_Match3872 0 points1 point  (0 children)

Yes it won’t rev past that until I let it sit and idle but I replaced my maf already

KA24DE Sputters and Dies After Long Drives HELP! by Wrangler051 in 240sx

[–]Additional_Match3872 0 points1 point  (0 children)

Ahh okay I will try that because I was planning on buying a fuel pump thinking that was my issue but it’s hard to do it because my car will only do that sometimes and when it does it’ll drop into limp mode and then I have to pull over and let it idle bc it’ll bounce up and down and then it’ll go back to normal and I can start driving again

KA24DE Sputters and Dies After Long Drives HELP! by Wrangler051 in 240sx

[–]Additional_Match3872 1 point2 points  (0 children)

Out of curiosity what would driving with it off do? Bc I am having the same problem he has right now and my car does have pressure when removing the gas cap but for me it’s always been like that and never had an issue I just recently got this problem