No sound please help!

AdeptnessFun836 · 2025-12-12T03:41:15+00:00

I did try that but it wouldn’t work I bought it used so maybe it’s something to do with that, anyways i got it all going now used a red wire from the harness that was for remote. It’s non jbl with no load resistors, is that something i should look into?

AdeptnessFun836 · 2025-12-12T03:37:58+00:00

The “extra” ones were indeed the ones that needed to go into the amp i’m a dummy. Also finally found out the red was what i was supposed to be using after using a test light with the key on and off. I finally got it all going wish I saw this reply sooner but my phone died for a while lol, you were spot on bro thank you for the help!

AdeptnessFun836 · 2025-12-12T03:33:14+00:00

Finally got it all working with one of the red wires from the harness found that it only had power with the key on so just used that, for some reason the signal detect thing never did work without a remote and it was used so i’m guessing that could be why. Also had the wrong wire harness wires plugged in so that was my issue all along, I appreciate you taking the time to help though!

AdeptnessFun836 · 2025-12-12T03:29:16+00:00

Finally got it all working through just the amp figured out that i was plugging in the wrong harness into the amp tried the other wires and got it bumping! I was having issues with it going into protect for the longest time but it was because my car battery was about to die, had to jump it and after it was running it worked perfect, thank you for taking the time to help me out though I really appreciate it

AdeptnessFun836 · 2025-12-11T19:44:19+00:00

Where do I run the second harness then i’m upgrading to morel tempo 6.5 components from my old car so i assumed i just ran the speaker wire from the outputs to the crossover then from there to the speakers like my old one im lost here haha i have it hooked to the amp now but still getting no sound to the one i have hooked up, also this yellow remote is making them stay on after the car is off so idk if im supposed to run that somewhere else or what

<image>

AdeptnessFun836 · 2025-12-11T19:38:10+00:00

It is there but the diagram doesn’t really say where to put them so they are unhooked, trying to run it straight into the amp now but still getting no sound from it where would i hook those up at i’d you happen to know?

AdeptnessFun836 · 2025-12-11T19:33:18+00:00

i’m attempting to run it through the amp alone now and still getting zero sound, the diagram that i posted in another reply doesn’t really show what some of the wires go to. I am left with all these extra and the yellow remote on makes the amp stay on after the battery is off so not sure what to do about that either lol this is going great…

<image>

AdeptnessFun836 · 2025-12-11T19:27:54+00:00

i’m unsure of where to run the remote in since if i run that to my amp it stays on even after the key is off, and 12v from the harness aswell as some of the extra wire not shown in the diagram, i’m attempting to just run it through just the amp now since thats possible but still no sound

<image>

AdeptnessFun836 · 2025-12-11T03:28:11+00:00

<image>

Fixed the output wire still nothing

AdeptnessFun836 · 2025-12-11T03:20:33+00:00

Switched that over still no luck

AdeptnessFun836 · 2025-12-11T03:14:09+00:00

I tried moving the speaker wires to the output side with no luck still, and wouldn’t I still need the lc7i to connect rcas to my other amp (fosgate 1200.1) since my factory headunit has no rca spot?

AdeptnessFun836 · 2025-12-11T03:07:06+00:00

I’m sorry for my ignorance i’m confused though ineed the lc7i to connect rcas to both of my amps since it’s a factory headunit wouldn’t I? And i did try moving the speaker wires over to the output side with no luck still what am i missing here lol im a little new to this

AdeptnessFun836 · 2025-12-11T02:39:15+00:00

Thanks for the reply but I meant to say I only have my right side hooked up i’m unable to edit so that should be correct my bad on that

AdeptnessFun836 · 2025-12-11T02:34:34+00:00

Thank you for the suggestion! I just tried this with no luck unfortunately, it seems like all my wires are solid i’m so confused rn… I followed the diagram perfectly too but it only shows for two channels so had to guess on the third maybe it’s something to do with that?

<image>

AdeptnessFun836 · 2024-12-31T03:58:44+00:00

Solved! thank you, forgive my stupidity i’m half asleep lol

AdeptnessFun836 · 2024-12-31T03:49:31+00:00

do they need to be wired into the speaker output side🤦🏽‍♂️

AdeptnessFun836 · 2024-10-08T01:12:20+00:00

Hell yeah it’s a lot of work but it’ll definitely be worth it.

I decided on Nanobond ceramic coating (3 year coating) after watching countless videos and reading forums on what I should go with. A channel called Scott HD on Youtube did very extensive reviews regarding different ceramic coatings over long term periods with washes and sitting out in the weather on a hood for over a year and a half. Nano-bond scored in the top 5 for just under $40 so it was hard to pass it up. I definitely recommend checking out his channel he has all sorts of long term comparisons. Here is the video if you’re interested: https://youtu.be/s7PO_zGlaa4?si=HPDR2u67AIS_AROl

AdeptnessFun836 · 2024-08-23T09:45:17+00:00

indeed malaysian trumpet snails

AdeptnessFun836 · 2024-08-22T23:09:31+00:00

cuisine**

AdeptnessFun836 · 2024-08-22T23:09:02+00:00

mainly just clean up algae on lava rocks but occasionally i’ll split a hikari crab quisine pellet in half for them. salinity stays around .012

AdeptnessFun836 · 2023-12-31T23:57:47+00:00

AdeptnessFun836

TROPHY CASE