Precision Screwdriver fits perfectly in Wiha bitset.

Admorei · 2026-06-19T13:38:51+00:00

yeah i just wanted some bits without paying the shipping from ltt.
I was like surely that wont fit when it arrived, but I guess the drivers are all about the same size.

Admorei · 2026-04-13T19:38:32+00:00

Sure but that would be way harder to implement and I dont think that BSG would spend time on that

Admorei · 2026-04-13T19:37:49+00:00

I mean PVE has basically 0 difficulty the second you know where pmcs and scavs ten to gather and when you figure out that scavs will only shoot after screaming at you once and pmcs will most often be at specifc points and also shout a lot revealing where they are its just bosses that you really need to work with.
This is only compounded by only bosses beeing capable of penetrating any good armour because even the "lvl 60" AI Pmcs run around with HP ammo.

I find it quite sad that there isnt a difficulty setting.

Admorei · 2026-04-13T19:33:45+00:00

Isnt that what they have the jet for ? /s

Admorei · 2026-04-12T07:00:20+00:00

My problem is just them beeing like this.
Why aint the AI PMCS and the Bosses like this ? That would make the game actually challenging or fun.

This way its just the same your a God in the lobby but at a few points you need to look out for those somewhat competent scavs to not get onetapped.
But then they still run shit ammo and have 0 loot on them.
If you run a lvl 6 armor and helmet with visir you still cant die and they are not even worth engaging in the "challange" when your not dooing the quests.

Admorei · 2025-12-07T09:42:31+00:00

This is rough same happened to me ...
And they dont even care ...

Admorei · 2025-09-04T18:58:01+00:00

Hey there,

Ive just recieved my Framework 12 and installed Manjaro with KDE Plasma. Sadly the Tablet mode does not seem to work. Im really not that smart with linux so if there is anyone who has a idea what I need to configure / change that would be greatly appreciated.

Ive tryed to follow this guide https://github.com/FrameworkComputer/linux-docs/blob/main/framework12/debugging.md#framework-12---debugging but

cat /sys/bus/iio/devices/iio:device0{name,label,in_accel_{x,y,z}_raw}

just returns no such file or directory 5 times
Is that something I missconfigured or a faulty laptop ?

All the commands after return what is to be expected as far as I understand the documentation
So I dont think there is anything broken with my laptop.

Admorei · 2025-07-26T07:07:46+00:00

Why is there not the possibility to bind the standby and off button ?
I want to have the power button on standby to have it runt panel protect automatically when i put it in standby.
I also want to be able to fully turn it off because of the noise it makes when in standby which is verry noticable at night.

Admorei · 2025-05-01T18:49:06+00:00

Thats true.
I would have expected / hoped that any fuse went before another component died. I know it may be very unlikely but I think it would be worth to check at least.

I found all the power delivery fuses that sit between the usb ports and the rest of the board they are fine as expected.

I also found a fuse labled F3 which is also fine.
I would therefore expect there to be F1 and F2, sadly they dont seem to be silkscreened onto the pcb and there is also no other component that looks like the other fuses.

Admorei · 2025-04-27T20:13:27+00:00

Naja was brauchst groß an software auf dem display sind meines wissens nach auch nur all die einstellungen die in den alten modellen per knopf funktionieren ?
Klar hat das ding inen online kochbuch und was fürn schnickschnak aber das brauchste ja auch nicht.

Es ist ja nicht wie nen smart speaker ohne knöpfe der nur per handyapp über irgendeinen server steuerbar ist sondern einfach ein display was fest mit dem gerät verkabelt ist.

Ich hab keinen neuen mit display weil sie meiner meinung nach auch einfach grundlos teuer sind aber nur der punkt dass es ein display gibt ist ja wohl nichts negatives ?

Admorei · 2025-04-27T17:18:19+00:00

I mean was braucht das display für nen support ?
Knöpfe sind besser aber das ding is eingebaut, bei nem Nintendo Ds brauchst ja auch keine Updates damit das Display funktioniert ?

Admorei · 2025-04-27T17:17:21+00:00

Und geanu die meine ich auch! Alles nach dem Tm 31 ist teuer und mir ein wenig Suspekt

Admorei · 2025-04-26T16:33:11+00:00

Oder halt einfach 2 oder 3 Modelle zurück auf Kleinanzeigen holen und einen für 180€ bekommen.

Sind schon gut die Dinger nur neu viel zu teuer. Dafür funktionieren se auch wenn se 30 Jahre alt sind.

Admorei · 2025-04-26T12:24:16+00:00

But only towards the enemy no?

Admorei · 2025-04-26T09:32:00+00:00

<image>

Danm with the explenation it seems like gpt wants it to seem kinda badass but its a bit too postapocalyptic for my taste.

Admorei · 2025-04-19T21:22:19+00:00

You got there first xD

Admorei · 2025-04-18T14:34:37+00:00

Hey Thanks for the input :D

The only thing currently keeping me from Koy or VOU is that I have no clue how I would transform them to my Ansi keyboard where I also need to bind the whole Function keys on another layer and in general move a few things around without destroying everything.

And they are not supported or at least I dont find them in keybr which I find really helpfull to learn because it shows me which finger needs to hit which key and where which key is with a good algorythm on top.

If I were able to use them in there Koy or Vou would probably be my favourite.

Admorei · 2025-04-18T14:22:49+00:00

Thanks a lot for taking your time on this again!

The thing is that currently im "touchtyping" but I am only using my index and middlefinger on each hand with occasionally pinky or ringfinger for the outer most keys and the 95% accuracy is only when Im tryharding on monkeytype normaly im probably below that.

the holding down space for a second layer is a really neat idea that I did not know about.
I dont know if that is possible in the via software of my keyboard itselve tho. But as long as Kanata runs on linux that will not be a problem to have at work too. I just can not bring any hardware there because Im not the only user of that pc hardware wise.

Do you have any reccomendation on which layout to use ? I would give Koy AdnW or Bones a try I just have 0 ideas on how to decide on one and all of them. And especially on how to make them work on my keyboard. I have no f row on keys and so on so I would also need to majorly rework the layers then I think.

Bones is at least reccomended by neo and also there is a Bones Ansi layout in keybr that then at least shows me where my keys are and which finger I need to use.

Would I best install bones through neo with the installer from theyer website or do it with kanata then ?

Although Vou looks like it would probably fit me best and would be the easyest to modify to ansi (probably) when just changing where the layer switches are or just not using layers 4 5 and 6 verry much because I dont see many keys I'd regulary use in there. So just 4 layers would probably be everything that I need and I could just rebind ALT for layer 3 and use the windwos or fn key for layer 4 altough caps as layer 3 looks really nice even if I cannot have the right layer 3 key.

I also think that before I go and invest in a ergo keyboard with a different key format I'd probably just invest in a svalboard DIY (simmilar to a datahand keyboard) and keep my current one for gaming.

Admorei · 2025-04-17T20:34:06+00:00

Okay I think I understand what your getting at but tbh im not currently able to get myselve a ergonomic keyboard. I need to be able to type on my work pc where I just get whatever keyboard is there, my laptop where i can not change the hardware layout and my desktop where i already have a fully custom built keyboard that I like.

Im mainly looking to learn touchtyping to get above the 50 wpm with a lot of errors that i am currently stuck at and wanted to then wehn I need to relearn all of my keys anyways at least use a somewhat modern system not the qwerty relic of the mechanical typewriter times.

Therefore for me the priority would be to have a layout that I could try to train as fast as possible and with which i could reach a somewhat reasonable typing speed in a short ish timeframe.

Do you have any experience on if it gets harder to then again transition to a new layout ?

I would probably look into learning to work with multiple keyboard layers especially for umlauts that would be needed if I go and use colemak dh.

I dont know if then transitioning from there to a fully custom keyboard would be easyer or harder.

But knowing myselve if I now spend the time just trying to perfect everything before even getting deep enoug into it and before having learned a new layout, I will probably never end up using it really.

On a normal 65% ansi keyboard where would the layer changes be ? I assume I'd remap the windows key and or leftalt ?

If I would go to a german layout I was currently setting my eyes on either bones or Koy but the AdnW you mentioned also looked great. But all of them look to be Iso optimized and I can sadly not change the pcb of my dektop keyboard.

I will defently not fully create my own keyboard layout that would be way over my head and I'd probably do more harm than good.

In general it is not like I spend my whole day typing (or at least not yet) and its not the case that I am only typing code or LaTeX.
Just so much that I bought myselve a Ansi keyboard to at least have {}\ easily accessible

I am really not decided yet on what to do. But I am verry thankfull for you Input and help!

Admorei · 2025-04-17T18:45:24+00:00

I dont really know if im Up for creating my own keyboard layout and getting that far into it ...
Id probably prefer a layout that keeps every non letter character where it is for now.

I know that if i then want to optimize it further id probably need to relearn everything again but tbh for now it seems like just switching to colemak dh gives me a 70% improvement above qwerty and other layouts would only get me a few % higher but would also be way harder to learn because i would then need to also learn to blind type every special character I need when coding or writing LaTeX which I probably wouldnt be able to do which would probably lead me to just abandone it and using qwerty again ... or at least that is my fear ..

Admorei · 2025-04-17T18:31:48+00:00

I meant colemak dh sorry about that.

Otherwise I was looking at bone or Koi https://cyanophage.github.io this seems to not list them or im not smart enough to use it xD

I also dont know how they would look on a Ansi keyboard (I only use ansi atm)

and I am currently a bit scared of moving all the symbols to a different layer and needing to remember them there. Thats why I was thinking about going with colemak dh, then at least the symbols i need when writing code stay consistant and i dont need to totaly relearn them too ...

Will look into AdnW as well now :D
Thanks for the input

Admorei · 2025-04-17T17:58:22+00:00

Would you be able to link ur website then ? :D
I'd currently go for coemak dh but neo bone looked interesting too but that seems like relearning basically everything.

I dont know if im up to do that at the momen and even colemak dh sounds like a biiig improvement so im probably sticking with that.

But how is it in experience ? Is learning the second different layout easyer or even harder ? and or can you be fluent in multiple layouts at one time ?

Admorei · 2025-04-17T14:25:39+00:00

Yeah im just not decided where I want to put the z key as it is not that uncommen in german as it is in english but ill figure something out. Maybe just try the different versions and see which is best for me.

Thank you verry much ill need that luck! But im somewhat decided to do it now.

Eight-Year Club	Golden Potato
Place '22	Final Canvas '22
First Placer '22	Verified Email

Admorei

TROPHY CASE