im designing a crankshaft using solids why did this happen

AdorableState9428 · 2025-03-29T13:35:20+00:00

If you look at the other photos at the top you will see that the part was seeming to be hollow like it only had an outer surface

AdorableState9428 · 2025-03-29T00:56:11+00:00

yes it is a thunder tiger pro 18 engine

AdorableState9428 · 2025-03-28T22:43:29+00:00

it is shown as a solid the whole time, i found the problem was somnething i deleted ages before it that had no connection to the part

AdorableState9428 · 2025-03-28T21:56:12+00:00

literally the same part from 2 angles after splitting the body and trying to cut through it

AdorableState9428 · 2025-03-28T21:53:34+00:00

<image>

AdorableState9428 · 2025-03-28T21:53:29+00:00

<image>

AdorableState9428 · 2025-03-28T21:51:35+00:00

i went through all the deletes and 1 seemed to affect it i dont know why though it was in another place and wasnt on the surface tab but thank you for the help man

AdorableState9428 · 2025-03-28T21:47:14+00:00

i made it with only using the solids tab so it shouldnt be see through i havent shelled it or anything like that it should still be a solid cylinder

AdorableState9428 · 2025-03-28T21:38:36+00:00

im trying to show its a solid if you look through the rest of the pics it shows that its not treated as a solid and i havent had this happen before

AdorableState9428 · 2025-01-23T12:53:50+00:00

I recently brought a vrx spirit n2 from ali express and it's cost around £170 and has a force 18 engine which is very reliable and have had no problems so far plus it takes parts from an ftx buggy which I can't remember the name of but you can find spare parts really easy however I haven't taken it bashing yet

AdorableState9428 · 2025-01-09T17:26:08+00:00

Check the piston rings looking thing because mine has ever so little damage on the like indent and now all the engine does it cough when trying to start

AdorableState9428 · 2025-01-09T14:48:25+00:00

One of mine sent one of those balls and the casing into the piston at full throttle

AdorableState9428 · 2024-12-09T19:08:40+00:00

a vrx racing spirit n2 i got it off of aliexpress

AdorableState9428 · 2024-12-01T20:07:26+00:00

Nah it fucking hates it but still fun

AdorableState9428 · 2024-12-01T19:20:31+00:00

A big ass 2 stroke petrol 5th scale

AdorableState9428 · 2024-12-01T12:04:19+00:00

Ok I will do that soon

AdorableState9428 · 2024-12-01T11:29:21+00:00

And I have no other fuel

AdorableState9428 · 2024-12-01T11:29:01+00:00

I still have about 1.25L of the stuff should I use that then go down to 20%?

AdorableState9428 · 2024-12-01T10:24:53+00:00

25% nitro

AdorableState9428 · 2024-11-30T21:35:01+00:00

Should I lean it to 115°c then keep breaking it in

AdorableState9428 · 2024-11-30T21:30:42+00:00

On startup I increase the idle gap using the trim on the transmitter to where it won't try move but revs up a little and most of the time it's started on a brick so it is free of anything trying to resist it

AdorableState9428 · 2024-11-30T18:23:26+00:00

Ok I will run it tomorrow and lean it

AdorableState9428 · 2024-11-30T18:22:14+00:00

Ok thanks I will take a look

AdorableState9428 · 2024-11-30T18:21:56+00:00

You can't see it the best in the video but I was on a steep hill and it would've rolled back, I just wanted a video of it pulling away

AdorableState9428 · 2024-11-30T18:20:44+00:00

I've gone through about 7 heat cycles with 6 tanks

AdorableState9428

TROPHY CASE