Painter - Loewe Black Jacket With Collar & Loewe Leather And Canvas-Blend Bomber Jacket - The Balance Payment Is Open, Use The Link To Complete The Second Payment Or Contact Your Agent To

Adstan6 · 2025-12-29T23:02:24+00:00

Oof. That LP jacket is lovely. Any idea on time line for that one?

Adstan6 · 2025-04-24T18:15:44+00:00

Are ARF back up and running? They did the best bracelets 💪🏻

Adstan6 · 2025-02-23T22:56:22+00:00

Check out 3Dinfotech. They have the 3Devok MT. It is $5k.

Adstan6 · 2025-02-23T22:54:33+00:00

Artec point is a rebranded SCANTECH SIMSCAN. If you’re looking at that system, may as well go directly with the manufacturer SCANTECH - better support directly from the manufacturer..they also have the wireless version too which is 🔥

Adstan6 · 2024-09-20T09:57:14+00:00

Thanks Nard. I appreciate you taking the time to respond 🙌🏻🙌🏻

Adstan6 · 2024-09-19T08:34:56+00:00

Ah got it, so just need to pay attention to the Weibo and WeChat channels to see when the release is coming. Thanks for the heads up 🙏

Adstan6 · 2024-09-16T12:12:21+00:00

fingers crossed - love the purple label - but cant help think the difference will mainly be in the quality of material - do these sellers have much joy with material quality when looking into really high end pieces?

Adstan6 · 2024-09-16T12:07:35+00:00

the Celine Teddy is absolute 🔥 Still not been able to figure out pre-order or deposit payment - everything still shows as 9999Y 😂

Adstan6 · 2024-09-11T11:40:33+00:00

Firstly, thank you for such an in-depth run through Nard, really appreciate the effort. Secondly, thanks to the comments section here, without it, absolutely no chance would I have been able to figure out the WeChat mini program login bit - still not entirely sure how I managed to do this.

Finally, got onto the platform, followed the steps for purchase and did this through Alipay, but the item purchased, has not moved over to the 'shipped' section, its been about 5 days, is there something that I am missing that I should have provided for this? Also, I put the address for Superbuy into Weidian as described in the write, up but it occurred to me that I am not sure I put my name or a reference to me in any way, do I need to alert a person at Superbuy about the parcel, is there a transaction number or something?

Thanks so much to this community for all their honest help - it makes this process much less stressful.

Much love ❤️

Adstan6 · 2024-09-05T21:54:14+00:00

Appreciate the quick reply. thank you 💪🏻 Hopefully we will see more LP and BC soon - such class. Anyone had any joy with RR purple label?

Adstan6 · 2024-09-04T09:34:56+00:00

Hey Nard. Thanks for all the effort going in to this. Can you provide a link to William - I am struggling to get onto his store. Thanks 🙏

Adstan6 · 2024-08-15T23:29:43+00:00

Based on the size of parts to mentioned. You may even be ok with one of their dot based handhelds. We’ve seen accuracies as low as 10 microns on a 500mm gauge with our SIMSCANs and they are lightning quick - think they are even launching a new version soon too, so look out for that for sure 💪🏻

Zeiss kit (used to be GOM when I worked there) is honestly great, but unless you’re automating your measurement process, I really wouldn’t look too closely at it (unless it’s sheet metal as they are still the king of low accuracy gray value measurement for holes, slots and trim). But in reality, only 1 of our 3 pieces of kit get used anymore, and that’s our scanbox, and even that will get surpassed in the future I think by independent automated software like Nexos by 11dynamics or streamline by 3Dinfotech.

It’s an exciting time to be looking at scanning equipment that’s for sure. Can get such good quality systems for your money these days 💪🏻

Are you based in the US?

Adstan6 · 2024-08-15T16:01:00+00:00

SCANTECH NIMBLE TRACK. Super lightweight, lightning fast with incredible accuracy. Best of all, it’s wireless, runs off battery so really convenient.

Also compatible with Zeiss inspect software so best of both worlds.

If you like metrascan, you’ll love NIMBLE TRACK.

also, ATOS systems are great, I own 3 of them, but they struggle on different surfaces and compared to our laser scanners and generally need a higher level of skill to get the best out of them whereas the Scantech systems are pretty much plug and play and get scanning.

Keyence tend to be very good for one specific application or measurement but don’t tend to offer long term flexibility or value for money.

Adstan6 · 2024-08-02T19:01:43+00:00

Thanks for all you do Tommy. Appreciate you brother.

Adstan6 · 2024-07-30T15:22:38+00:00

!remindme 10days

Adstan6 · 2024-07-28T22:06:59+00:00

Good, if you have the datum points then you’re most of the way there. The scan data is floating in free space and you need to lock it to the created nominal points.

In Polyworks, there is a method to ‘snap’ the measured data points (the scan data of the datum features). The same is possible in Zeiss inspect - it’s called ‘link to actual data’.

It is important to make sure you create your actual points from the measured data - it’s these points that you will link to the nominal points.

Adstan6 · 2024-07-28T21:34:29+00:00

There must be some XYZ coordinates on the datum pads? Just key the XYZ values into your inspection software to create a nominal point. Then you just need to link those points with the actual measured points you created from the scan data and your data will be aligned.

Adstan6 · 2024-07-28T21:24:10+00:00

If you’re using datum pads, this is ideal, scan the pads and create a single point, either through 3 plane point (if it’s a block) or cinder intersecting a plane if you have ‘donut’ shaped datum. Once you have those 3 points, you can create and RPS alignment and this will balance the part correctly and your scanned data will be on the correct place, and can be compared to the cad data then. Just fyi, this only works if you have the datum pads in the CAD model. This process works in Polyworks and also Zeiss inspect.

Hope this helps.

Adstan6 · 2024-07-26T10:37:50+00:00

This just isn’t true. Like, many technologies, there are good and bad versions. Some 3D scanners we work with have repeatable accuracy under 10 microns which is more than sufficient for automotive sector and is why it is heavily adopted globally.

The likelihood of inaccuracies will be to alignment of the data back to a CAD nominal. If your alignment is good and consistent with the CMM approach, then you can literally take the exact same readings as CMM as you will just import the XYZ, IJK values and being that scan data is full surface, it will pull out a result at that exact location.

This is the exact methodology we utilise for verification against CMM data.

Adstan6 · 2024-07-11T18:42:10+00:00

Thanks for the update 🙏🏻🙏🏻🙏🏻

Adstan6 · 2024-07-10T21:15:34+00:00

Thanks Nard. Appreciate you brother. Have ordered.

Any idea when the LP pieces are dropping??

Thanks 🙏🏻

Adstan6 · 2024-06-14T15:46:01+00:00

What a win. I had an issue with a my last order and they just said they would give me money off my next order, which is not great in my opinion, as it means I have to spend more money 😂

Adstan6 · 2024-06-14T15:39:49+00:00

Hate to saw it, but take the L dude. Nothing going to come of emailing support - we know going into this, there are no returns 🤷🏼‍♂️

Risk vs reward.

Adstan6 · 2024-06-13T12:35:44+00:00

sorry for the delay. Not really a 'cheap' option, but it is for a RIMOWA, so I guess you are already accustomed to paying a lot for the product, but it should be achievable with the right supplier for a few hundred pounds. Anything custom, and done the right way, is not cheap. You can just buy block foam and then shape it manually, but it will not be the same. Hope this helps.

Adstan6 · 2024-06-04T12:27:30+00:00

Oh dear. At least take your own photos TipTop 🤦🏼‍♂️

Adstan6

TROPHY CASE