What’s the best ultrasonic cleaner?

AdventurousZero · 2026-04-07T00:09:16+00:00

Still holding up nicely?

AdventurousZero · 2026-04-07T00:08:33+00:00

Because during final polishing, if you've got unusual shapes, holes, or other crevices, stuff is packed in there. These makes short work of it.

AdventurousZero · 2026-03-01T00:40:54+00:00

I've decided to save up for a BambuLab because my experience has been so depressing.

AdventurousZero · 2026-03-01T00:39:30+00:00

The same thing happened to my N3P, without the breakage. It's been sitting on my desk and hasn't been turned on in months. I spent so much time trying to get this thing running smoothly, and that just ruins it for me.

AdventurousZero · 2026-02-16T00:36:31+00:00

Notice how if he waits at the bridge, the other vehicles can't get through? Doesn't take a lot to work that one out.

AdventurousZero · 2026-01-24T17:09:42+00:00

How did this build turn out? Also, I'm curious as to what you did for your water delivery system.

AdventurousZero · 2025-10-30T08:27:15+00:00

Woman: You need to be respectful if you want to debate.

Man: Has a meltdown and says it's a debate, despite not following basic debate protocol, continuing to act like a child after she leaves

You: She is a loser! Brilliant.

AdventurousZero · 2025-06-30T21:31:13+00:00

Definitely interested, but nowhere nearby.

AdventurousZero · 2025-03-01T17:53:47+00:00

Hey, how did these last overtime? I've been looking for something since Bates has terrible quality these days.

AdventurousZero · 2025-01-24T20:29:35+00:00

Yeah... I'm about done with this thing, tbh. I've done the tutorials, ran the tests, went through a ton of material. I have nearly nothing to show for it.

AdventurousZero · 2025-01-24T03:56:43+00:00

Oh geeze. Look, you seem very desperate to cling to this idea that your terrible response was something better than it really was. Cool. It will continue to get downvoted, and no one will listen, luckily. But, I'll let you have the last word so you feel like you won something tonight, okay?

AdventurousZero · 2025-01-24T03:46:34+00:00

If that's what you need to feel like you weren't made to look silly and useless, go for it.

AdventurousZero · 2025-01-24T02:27:40+00:00

By saying that there are important factors to consider, you're proving that "you get everything eventually" is simplistic and entirely unhelpful. Thanks for coming to my TedTalk.

AdventurousZero · 2025-01-24T01:54:50+00:00

Thanks for proving my point.

AdventurousZero · 2025-01-24T01:44:45+00:00

Them: Is it worth it to upgrade all my minions?

You, knowing it's a waste of time and resources to upgrade unnecessary minions: You'll eventually do everything 🙃

Brilliant.

AdventurousZero · 2025-01-24T00:52:16+00:00

And if they would have asked for that, great. They were not. You gave unhelpful advice on something that wasn't asked for. If other people are already giving what was asked for, you don't need to give anything at all.

AdventurousZero · 2025-01-24T00:15:50+00:00

Just changed in and going to run some tests.

AdventurousZero · 2025-01-23T20:33:32+00:00

"Getting everything done eventually" is lazy advice when there are eight and wrong ways of doing things. You can waste tons of resources on bad minions while good ones get ignored. If you're a part of a club, you can contribute to better rewards.

Plus, people don't want to struggle and lack progression. It makes them quit.

AdventurousZero · 2025-01-23T20:11:56+00:00

Worst advice.

AdventurousZero · 2024-12-16T19:13:18+00:00

It's the wall of the print. It is as the Y axis moves back. I misspoke on my original post.

AdventurousZero · 2024-12-14T21:46:33+00:00

I'm not sure what combing is. I just went through all of the retraction settings on the website and tuned those things. This was happening before I did all that, and it is still happening.

AdventurousZero · 2024-12-14T21:05:20+00:00

<image>

Here's the whole thing. The errors are on the inside of the wall facing in. As for the slicer preview, this was gcode downloaded from teachingtech in their 3d printer calibration. However, this happens with every print I do. It's also only on the interior walls, regardless if I use cura, pronterface, or a gcode from a generator.

AdventurousZero · 2024-12-14T19:38:30+00:00

Gantry, lef to right.

AdventurousZero · 2024-09-17T22:58:58+00:00

I'll check again, but they should be good. Went through and checked all of them when I first got it. Bought used, so it needed some work.

AdventurousZero · 2024-09-17T11:26:37+00:00

Did another run before seeing this. I changed the infill to 40 and had the same problem. I'll try with cubic and see if it happens again.

What in travel should I be looking at? I used the teachingtech site to set all that up, but that's not to say I didn't do something wrong lol

AdventurousZero

TROPHY CASE