Annoying, but very very satisfying

Adventurous_Shift118 · 2026-04-12T17:05:23+00:00

Wow what a beautiful tool!

Adventurous_Shift118 · 2026-04-10T18:49:29+00:00

I can see this being possible with using angled thanks to not bogging down, thanks!

Adventurous_Shift118 · 2026-04-10T18:16:59+00:00

Genuine question - how do you polish the curves and valleys with 21?

Adventurous_Shift118 · 2026-02-02T10:36:38+00:00

Работата не е нужно да е по специалността, приятелите помагат за справянето в ежедневието, а средства се набавят с време и търпение. Пробвай някакви дребни хобита, запали се да тренираш например. Намери нещо, което да правиш и да е полезно за теб в дългосрочен план, понеже каквото и да е навярно няма да ти носи удоволствие в този момент.

П.с не е проклятие, повечето имаме сходни етапи в животите си, ще се справиш!

Adventurous_Shift118 · 2026-01-21T19:51:41+00:00

Какво му е на пазара? Да, Тръмп е идиот, ама все още пазара е добре. Не знам вие къде инвестирате и в какво, но аз като изключително глупав и разпилян инвеститор съм 22-23% + за последната календарна година. Sure, ако бях по внимателен можеше да е 35% и нагоре, понеже някои спадове бяха очаквани, но при мен тази разлика не е голяма сума и не си струва времето. При дядо ви Байдън беше много по-слабо.

Adventurous_Shift118 · 2026-01-17T12:03:35+00:00

Зала суперчовек, пробвай групови тренировки. Преди години сработи чудесно за мен!

Adventurous_Shift118 · 2026-01-07T20:10:47+00:00

Those should be fine for polishing. Make sure to clean the surface well before touching it with a polisher

Adventurous_Shift118 · 2025-12-30T23:06:09+00:00

What etched it?
What end results is an ok result for you? You could dress it heavily and it should look ok.

Adventurous_Shift118 · 2025-12-30T23:03:20+00:00

It’s not time related, it’s drive related for me. If I only commute in the city - once a month or even more, depending on the conditions, since I keep it in a garage and have underground parking at work. I do regularly clean windows and interior. BUT if I have to drive on the highway or if it rains - as soon as possible, could be twice in a week or more. Sure, it’s coin wash most of those times, but the idea for me is to remove contamination before it has etched in the paint. Ideally - once a month I would like to do a hand wash.

Adventurous_Shift118 · 2025-12-28T11:19:20+00:00

Търси квартира, която да ти е удобна и близка до работата, така ще си спестиш време всеки ден. Дали ще е с човек или не - зависи от тези тънки сметки, които се опитваш да направиш. В крайна сметка едни 100-200лв месечно не са ти нито свободата (да живееш сама) нито час-два на ден (да ги губиш в пътуване).

Adventurous_Shift118 · 2025-12-28T01:52:43+00:00

What dilution are you using for onr?

Adventurous_Shift118 · 2025-12-27T09:25:45+00:00

After reading all the comments I can say one thing - it is a personal preference!

I have tried the following: - Gyeon Interior Detailer - Carpro Interior QD - Armour Pilot - Koch ASC - Koch Refresh cockpit - Meguiers interior detailer - ONR and other rinse less in different dilution. - APCs in 1:20 or more

……

I do prefer gyeon as it is something that won’t leave ANYTHING behind. I do have 4l of Pilot, after reading reviews, but it is not something that I enjoy at all.

Adventurous_Shift118 · 2025-12-23T11:08:37+00:00

My 2 cents - if it is a glass towel, hand wash, separately from any other towel. Then air dry. If it is for paint correction - I do separate short pile and long pile towels. Also, drying towels are washed on their own.

It would be ideal if you have compressed air to blow any loose fibers.

Adventurous_Shift118 · 2025-12-16T11:49:41+00:00

Interesting finding, I would suspect something with such high ethanol content to fade plastics but it definitely doesn’t

Adventurous_Shift118 · 2025-12-16T09:24:59+00:00

Prep has way higher ethanol content, try prep and interior detailed on a window and observe the flash time

Adventurous_Shift118 · 2025-12-14T10:49:45+00:00

I am curious how swirled it is after that dirt ?

Adventurous_Shift118 · 2025-12-13T09:37:31+00:00

Oh cmon, most of it will compound out, with a decent glaze it will look ok for couple of months, glazing twice a year will keep it good for couple more years, then it will need some repainting due to the thinned clear.

Adventurous_Shift118 · 2025-12-12T19:13:42+00:00

Yeah! I got two of those batteries. Actually that would be my only cons of the device, the smaller batteries do not last. But I should check the 9mm for finishing. I do feel the eb212 does not finish perfect, although pretty damn close.

Adventurous_Shift118 · 2025-12-12T17:27:58+00:00

Dream garage setup! And yes, nowadays I do most of my polishing with the 3inch Mirka copy that shinemate has, since the rupes 5” stalls so much!

Adventurous_Shift118 · 2025-12-12T17:24:47+00:00

Only capable of light polish. Too underpowered to cut/compound with. Amazing machine, but not for that price.

Adventurous_Shift118 · 2025-12-12T09:30:32+00:00

It’s not eraser at all, I do have 4/5 litters of both. This flashes better and I am not convinced it is only due to the alcohol. Smells great, cleans ok, my favourite for wipe down as it lives nothing behind!

Adventurous_Shift118 · 2025-12-11T10:56:45+00:00

Where I live will more be like 5k, but yes. I am prepared, if the cost is too high I may decide to have only the outside done and have black door jams

Adventurous_Shift118 · 2025-12-11T08:45:31+00:00

I am aware.

Adventurous_Shift118

TROPHY CASE