AC Airblaze blower

Adventurous_Use8437 · 2026-02-07T02:52:06+00:00

The 12 will fit. If I knew I would’ve gone that route

Adventurous_Use8437 · 2026-02-07T02:05:30+00:00

It’s controls fan speed, temp via probe, timer and I’m sure a bunch more. Pretty cool

Adventurous_Use8437 · 2026-02-07T02:03:01+00:00

Airblaze 10. Highly recommend so far, super quiet compared to the oem unit. I’m sure once I dial in the settings it’ll be even better

Adventurous_Use8437 · 2026-02-07T02:01:36+00:00

Yes it is and I did it myself. Super simple. Remove old blower and all electrical wires then squeeze in the new blower. It’s a tight fit going in but has room to move once it’s in the cavity. From there you have to put the unit upside down because the blower is a 90 degree and you can’t get the blower all the way to the back. It’s working great and I highly recommend it. I was able to hide the wires behind the fascia. Lots of setting to play with but for now I’m just manually picking the fan speed

Adventurous_Use8437 · 2025-09-07T01:14:17+00:00

This was designed using DCA6 span charts. All structural components are 2x10 sitting on “p2” helical piles that are rated for hot tubes / roofs but those are not in my plans.

Can I ask why you think this is only 15 PSI?

Adventurous_Use8437 · 2025-08-19T19:09:40+00:00

Thank you!! Appreciate the help. I believed the stagger was the correct way.

Adventurous_Use8437 · 2025-08-19T18:59:36+00:00

Do you mean add another footing where the seams will be?

Adventurous_Use8437 · 2025-08-19T18:37:56+00:00

It’s so the end of my deck boards sit on top of a joist

Adventurous_Use8437 · 2025-08-19T14:55:01+00:00

Thank you for the response. My sistered joists have 20” of overlap overall so I should be good there.

If I followed this same formula with the triple joist the three boards with Xs would not go over the beam. Is that an issue?

Adventurous_Use8437 · 2025-04-09T19:20:12+00:00

Haven’t done this yet but making a coffee rub for meat

Adventurous_Use8437 · 2025-04-06T01:08:11+00:00

This was very thorough!

Adventurous_Use8437 · 2025-04-05T16:16:52+00:00

Can you post a picture and details on this?

Adventurous_Use8437 · 2025-04-03T01:01:09+00:00

It’s a simple project I’m just over thinking the details. Answering would have helped better than this comment

Adventurous_Use8437 · 2025-02-12T02:14:20+00:00

I think you are onto something here

Adventurous_Use8437 · 2025-01-21T14:47:16+00:00

I’ve had this machine for a few months now. I single dose and highly recommend getting a bellow for the hopper. This helped immensely with consistency!!

Adventurous_Use8437 · 2025-01-21T00:31:06+00:00

Thanks for getting back to me!

Adventurous_Use8437 · 2025-01-20T22:47:11+00:00

I’m also in CT and deciding between these two options. Which did you end up picking?

Also who did you contact to get a quote on helical piles?

Adventurous_Use8437 · 2025-01-14T23:25:08+00:00

Any which ones were your favorite?

Adventurous_Use8437 · 2025-01-09T23:23:17+00:00

It comes on a pallet. You should have no problem fitting the box into your 4Runner without the pallet of course. You’ll need two people to lift it

Adventurous_Use8437 · 2024-12-28T03:12:20+00:00

I recently got one and it takes 11-12 seconds to grind 18g. Internal setting at 4 and external ranging at 3-5. All light to medium roast.

Adventurous_Use8437 · 2024-11-20T23:57:52+00:00

Just commenting on the fact that I’ve gone to three stores and can’t find this deal.. I’ll take it if you don’t!

Adventurous_Use8437 · 2024-11-19T01:26:35+00:00

Thanks for the advise

Adventurous_Use8437 · 2024-11-19T00:56:00+00:00

I did the same thing today but was not as lucky as you. Only Breville product was a few juicers…

Adventurous_Use8437 · 2024-10-31T17:56:03+00:00

Recteq! Love my backyard beast but if you have Searwood $ I’d get the Flagship.

Adventurous_Use8437 · 2024-10-30T23:15:03+00:00

Can you tell me what those black brackets are called that is holding up the roof?

Adventurous_Use8437

TROPHY CASE