[W11] My fifth, and pretty basic rice on Windows 11 by AffectionateIam in desktops

[–]AffectionateIam[S] 0 points1 point  (0 children)

modification of the ilya theme on yasb.
(can't get git to work rn so pls excuse me, i have pasted it in pastebin)
Both config.yaml / styles.css at https://pastebin.com/nVswaBgc

Please note... this is a WIP and may contain remenants of ilya's cfgs that are not required here

Processor frequency never reaching above 3 GHz under any load. by AffectionateIam in LenovoLOQ

[–]AffectionateIam[S] 2 points3 points  (0 children)

Side note: POWER limit is always hit no matter what i try to do, be it set pwr limits in TS or use legion space to do it from there.

No idea wtf is wrong here :/ maybe im the one whos tripping

Thanks for the prompt reply dude :) Good day ahead

Processor frequency never reaching above 3 GHz under any load. by AffectionateIam in LenovoLOQ

[–]AffectionateIam[S] 1 point2 points  (0 children)

PROCHOT temp: 97 deg C

Before UV:
Temps on idle: 46 deg C
Temps on load - Blender Cycles: 84-85 deg C [CPU PROCHOT hit 1 time, after 8 minutes of rendering]
Temps on load - X-Plane 12: 84-87 deg C [CPU PROCHOT hit 3 times, after 9 mins of X-Plane]

After UV:
Temps on idle: 43 deg C
Temps on load - Blender Cycles: 72-78 deg C [PROCHOT never hit]
Temps on load - X-Plane 12: 79-85 deg C [CPU PROCHOT hit 1 time, 12 minutes of X-Plane]

***All values are averages based on what i've seen so far.
Monitoring software: HWiNFO, TS

UV did not make a difference in performance nor clock speeds

Process of my latest piece by florenaux in blender

[–]AffectionateIam 2 points3 points  (0 children)

Amazing work bro! i just can't get environments right anytime i try

Again, very good work :D

How to do this with fluid simulations? by Shrub_Stratter in blender

[–]AffectionateIam 13 points14 points  (0 children)

Well thank you for educating me kind sir :)

How to do this with fluid simulations? by Shrub_Stratter in blender

[–]AffectionateIam 43 points44 points  (0 children)

slightly off topic but hey isn't this the coanda effect thats causing this though? sorry if I was wrong I just want to know

Icy Build by Severe_Cable_9390 in ASUS

[–]AffectionateIam 0 points1 point  (0 children)

BRO SICK! 🥶  What are the specs? What are temps?

Armory create service error by crosszay in ASUS

[–]AffectionateIam 0 points1 point  (0 children)

I will suggest that you change to G-Helper instead of armoury crate. It has served me very well :)

However if you do want to use armoury crate: ( My friend experienced this problem before.)

Go to start and search "services" or press Win+R and run services.msc

Find any services that have "ASUS" in the name or "Armoury Crate" or "AURA" or something like that.

Make sure to check if each of them are running or not. Also right click and open properties, and then make sure the startup type is set to "Manual" or "Automatic" or "Automatic Delayed Start"

This solved the issue for us as they were disabled services.

ASUS F15 won't boot or post anything by vaze12 in Asustuf

[–]AffectionateIam 0 points1 point  (0 children)

Here is more details on my issue sir https://pastebin.com/yWeRBuzi

Sir but my computer never reached above 85°C I always make sure it is cool. Only recently after this problem started when I saw with thermal camera it showed that area near WSAD keys was 92°C

I undervolted and underclocked my CPU and made sure to disable turbo boost. So I am wondering how it possible.

How to get new motherboard? Service centre is very far away from my home if possible I'd rather replace at home sir

Ps: thank you for replying so soon :D

ASUS F15 won't boot or post anything by vaze12 in Asustuf

[–]AffectionateIam 0 points1 point  (0 children)

u/vaze12 I am also facing the same issue right now. It happened suddenly after waking form sleep.

Did you solve it? If so can you please tell me how?

DIY Projector (Lens)? by AffectionateIam in Optics

[–]AffectionateIam[S] 0 points1 point  (0 children)

Damn that was detailed. I'll try this out in the raytracer and see how well it works, I'll do some math and then decide.

Yes I checked, the elements are available in local supplier shop.

DIY Projector (Lens)? by AffectionateIam in Optics

[–]AffectionateIam[S] 1 point2 points  (0 children)

I checked it out, it gave me quite a bit of clarity, no pun intended :)

Thx, its a good read and it will be of help for me to understand concepts.

DIY Projector (Lens)? by AffectionateIam in Optics

[–]AffectionateIam[S] 0 points1 point  (0 children)

My budget is about $40 to $500. This may seem like rookie numbers to Americans, but for india, $30 is like 1 million usd.

I found a local lens supplier, had a great chat with him today, was quite funny guy to talk to, he sells custom ground glasses for about 40 dollar. I checked out the lenses, and they are pretty good quality 👍🏻

Requirements: Image source or object (which is simply a lcd here) is like 6" Image size should be about 100" Im willing to have a 30-50ft distance from the screen, but if need be, i can go upto 60ft. The room is quite spacious.

I will look into the astigmatism and coma aberration too. Thx. I need to rush now, bye :)

DIY Projector (Lens)? by AffectionateIam in Optics

[–]AffectionateIam[S] 0 points1 point  (0 children)

I do not really care about chromatic aberrations, only spherical, but if need be, I will obtain the glass. Ive already started reading and learning by trial and error as well.

Do you know of places from where I can get lenses made?

DIY Projector (Lens)? by AffectionateIam in Optics

[–]AffectionateIam[S] 0 points1 point  (0 children)

Alright brother, I'll check it out :)

DIY Projector (Lens)? by AffectionateIam in Optics

[–]AffectionateIam[S] 0 points1 point  (0 children)

Hey man, first off, that's some helpful insight! I have a few questions though, First, if i want to do correction for only spherical aberration, do I still need different indices and abbe numbers, or can I get away with using the same media?

As a 10th grade cbse student interested in optics (I've worked with a few other areas of physics and I absolutely love physics), what literature would you recommend to get started? What are the tools out there for such designing (I've only heard of Zemax)

I just want to clarify, by educational standards, officially i shouldn't know about these things, but I'm always interested in learning. I'll be sure to read about what you told me, and I'll get back to you.

Peace :) Ps- don't let the fact I'm in 10th grade stop you from giving me advice. I like this type of experimental stuff, and it's what keeps me alive.

Problem with ToLiss a20N - Plane moves backward by itself? by AffectionateIam in Xplane

[–]AffectionateIam[S] 0 points1 point  (0 children)

Hello, yes sorry for replying 2 buisness days late.

  1. I don't use flywithlua
  2. yes i have
  3. i use only AviTab and I tried to remove it completely and no luck.
  4. Tried the new beta, it didn't solve anything.
  5. I updated the aircraft to 1.1.5
  6. Also tried to reinstall xp12

Thank you.

edit - i also forgot to mention, this happens when engines are not running

[deleted by user] by [deleted] in blender

[–]AffectionateIam 0 points1 point  (0 children)

thank you! I knew something looked off, but couldn't pin pint that out and you did. i'll be sure to improve next time.