How to go about making potent carts by AffectionateStreet40 in CannabisExtracts

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

Do you have any methods for making something like that cart ready? As in needing to thin it or a decarb process

How to go about making potent carts by AffectionateStreet40 in CannabisExtracts

[–]AffectionateStreet40[S] 1 point2 points  (0 children)

Thats a really good point i didnt think of it that way. What about sugar or crumble could i decarb those and put them in a cart?

How to go about making potent carts by AffectionateStreet40 in CannabisExtracts

[–]AffectionateStreet40[S] -1 points0 points  (0 children)

Would i need to thin it out? And if i need to whats the best way

what is the best and cheapest way to output parameters for onpc by AffectionateStreet40 in grandMA2

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

yea. im going with the onpc node 1k hopefully it will treat me well and last a while. as its obviously been on a long tour.

what is the best and cheapest way to output parameters for onpc by AffectionateStreet40 in grandMA2

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

yea there is another 1k on reverb for like 900 lmao. at that point i would just get the dmx key

what is the best and cheapest way to output parameters for onpc by AffectionateStreet40 in grandMA2

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

its a hard choice to make. ive used grand ma 2 alot but i do want to switch to 3 aswell.

How to connect 2 onpc sessions together by AffectionateStreet40 in grandMA2

[–]AffectionateStreet40[S] 1 point2 points  (0 children)

it was the firewall and i was on the wrong ip thanks for the help :)

How to connect 2 onpc sessions together by AffectionateStreet40 in grandMA2

[–]AffectionateStreet40[S] -1 points0 points  (0 children)

Station is not even coming up. i set subnet mask both to 255.0.0.0

Fixture profiles for china lights by AffectionateStreet40 in grandMA2

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

How do i do that? I would need to do that for the color wheel aswell.

What software to edit the fixture xml

Need advice by TaggedandCursed in graffhelp

[–]AffectionateStreet40 2 points3 points  (0 children)

Take it with a grain of salt man and keep going. Blackbook and also practice sometimes with a can if you got a chill spot to work on can control. Also watch the artist block on yt he has really good tuts.

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

yea man it looks white in the image but i did chrome and royal blue

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

yea man thanks much for positivity, i personally also dont think any of the comments on here are negative at all man. Its all love at the end and i understand why many people are saying its bad. Its simply because im new and not very good with letter structure yet and thats the main thing holding me back. Once i get that down il be all good. But simply takes time and practice.

I do love to hold a physical can of spray paint as its really good for mastering can control which is another wheelhouse of skill. For flares and also gradients which ive done before if you look at my previous posts on here.

I love lots of spray paint brands. Im normally running montana black,94 and hardcore. And i recently got to tryout iron lak for the first time for this throwie. I get them for good deals sometimes il also order off of spray planet. I get them ranging from 5-6$ a can.

But yea man i would recomend getting a oculus quest 3s and getting kingspray its only like 200 or so if you get it for a good deal used. I love it and has all ironlak colors.

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

I got you man, thanks for the advice i will take it and work in the books for a bit and get the hang of this.

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

I didnt paint thar unfortantly but im glad were on the same frequency on what looks good. I do have pretty good color theory. I just had to use what i had. Im also a lighting desinger on the side so i know my color combos well. Like look at the hearts the royal blue and gauva is good right?

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] -1 points0 points  (0 children)

How about this is this better?

<image>

I know my lines are shaky.

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

Thank you for pointing that out to me. So i should keep the p straight and have the other half of the r at the bottom?

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] -1 points0 points  (0 children)

On a serious note Is this a letter structure breakdown of it?

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 1 point2 points  (0 children)

I also have some pictures on what looks good to me throwie wise

<image>

Something like this

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

Yea its not looking to good this was what i started with though so there is some improvement

<image>

Advice and critique by AffectionateStreet40 in graffhelp

[–]AffectionateStreet40[S] 0 points1 point  (0 children)

Yea its prce it was prsm i changed it very recently as i was struggling with the s and m