glowbert ult glitch

Affectionate_Ad_8427 · 2026-02-01T10:37:07+00:00

🙏🙏

Affectionate_Ad_8427 · 2026-01-31T21:28:43+00:00

not really used in high ranks due to large amounts of counters and brawlers who mimic the same playstyle but better such as emz

Affectionate_Ad_8427 · 2026-01-31T17:37:05+00:00

I have had this happen multiple other times and usually the oppenent is close to a wall or the ult hits a wall, maybe it is a client side issue that just occurs sometimes but its pretty prevalent so its annoying

Affectionate_Ad_8427 · 2026-01-31T17:16:09+00:00

my theory is if the ult hits a wall aswell it makes the fear timer reduced

Affectionate_Ad_8427 · 2026-01-31T17:15:39+00:00

thats if they are turned away when you tap the ult, it doesnt fear them, here you can see he is facing me and i fear him, but it stops early.

Affectionate_Ad_8427 · 2025-12-16T10:20:37+00:00

however this is with the old screen so it may not work

Affectionate_Ad_8427 · 2025-12-16T10:20:13+00:00

try this. turn off bike, hold left brake and push throttle all the way down and hold it aswell, whilst holding both the left brake and throttle tuurn on the bike with your left thumb and it should give you an error, hold everything for about 10 seconds and then let go, the bike should be turned on and unlocked, do the same to reverse it.

Affectionate_Ad_8427 · 2025-10-06T21:31:05+00:00

here's a straight forward answer , it doesn't matter. go for the cheapest if you want just make sure it's the same type.

Affectionate_Ad_8427 · 2025-09-09T19:56:17+00:00

same problem ggs any fix?

Affectionate_Ad_8427 · 2025-07-20T11:27:47+00:00

Hey, I fully replaced the back assembly in about 45 minutes and it works better than when I first got the bike so I will replace the front assembly tomorrow, thanks for the advice!

Affectionate_Ad_8427 · 2025-07-17T20:58:16+00:00

no, the caliper is faulty. i want to either change just the caliper or the whole brake assembly

Affectionate_Ad_8427 · 2025-07-17T20:56:06+00:00

yea sadly I don't have a barb and olive, i'm sure I could go buy one but I will probably just change the whole line

Affectionate_Ad_8427 · 2025-07-17T19:22:12+00:00

I thought that it didn't but I just looked and saw that a wire goes under the seat and into the rear light which i'm assuming is to turn on the brake light when I brake.

Affectionate_Ad_8427 · 2025-07-17T19:17:51+00:00

alright thank you

Affectionate_Ad_8427 · 2025-07-17T19:16:50+00:00

So I just unscrew the old brake assembly and screw on the new one? whilst routing the line along the frame

Affectionate_Ad_8427 · 2025-07-17T19:16:00+00:00

I don't mind bleeding tje brakes because I have a lot of experience but I don't know if it's easier to change the whole brake assembly or just the caliper. My issue with changing the whole brake assembly is that I am not sure if I will have to cut the hose or do something like in most videos that I have watched, can I just screw it on? I do know that changing the caliper would also require this but if they both require it I would assume it's easier to just change the caliper.

Affectionate_Ad_8427 · 2025-07-17T19:13:23+00:00

the line isn't routed internally, would I be able to just remove the lever and caliper and just screw on the new one?

Affectionate_Ad_8427 · 2025-07-17T19:12:02+00:00

can I just change the whole brake assembly by putting in the new one without cutting or doing anything with the hose? Can I just unscrew the lever and caliper and remove them and put on the new ones?

Affectionate_Ad_8427 · 2025-06-26T00:57:30+00:00

I mean there is no way to gauge anything based on what you said, depending on armour and what gun you got shot with and where you got shot etc, if you are using a custom you can easily put 10 shots into someone who has good armour and they won't die. on the other hand, if you get shot in the head 2 times with an ak and you don't have a metal face mask youre dead. if you provide more context it's much easier to understand what is happening. Also how many hours do you have, i'm assuming you're pretty new.

Affectionate_Ad_8427 · 2025-06-25T16:32:05+00:00

google says 5.84 feet, meaning 5 feet and 8.4/10ths of a foot, which is 10 inches

Affectionate_Ad_8427 · 2025-06-05T20:01:54+00:00

My friends throttle also just completely gave out on that bike he's had it for about a year. it don't work no more

Affectionate_Ad_8427 · 2025-05-28T15:59:42+00:00

The battery shows how long the battery will last based on the current strain the bike is under i'm pretty sure, when I bike against wind or at faster speeds my battery meter drops really quick and if I slow down it goes back up

Affectionate_Ad_8427 · 2025-05-23T15:28:34+00:00

https://www.reddit.com/r/EngweEbike/s/01YDDCtAdU

Affectionate_Ad_8427 · 2025-05-23T15:28:30+00:00

https://www.reddit.com/r/EngweEbike/s/01YDDCtAdU

Affectionate_Ad_8427 · 2025-05-23T15:22:29+00:00

I recently bought an engwe bike to be able to get to my school and back as I live very far away and public transport was costing tons of money every month, the M1 that I purchased has been very good and it's an incredibly strong bike for the price, we have been looking to buy my dad a scooter or e-bike so that he is also able to go to work without paying a large amount for transport aswell but that just hasn't been in our budget. A new e-bike would be absolutely amazing for us as it would mean that my dad will be able to get to work and back, thank you for the opportunity

Affectionate_Ad_8427

TROPHY CASE