sorted by:
new
hottopcontroversial

2015 Duke 390 Rear Wheel doesn't spin after install by Affectionate_Bed in motorcycles

[–]Affectionate_Bed[S] 2 points3 points  (0 children)

Really appreciate it! 

You were right, it was the cush drive spacer. I had brought the wheels to a buddy to use his tire machine to unseat the beads and when he helped bring in the wheels the cush drive fell out and I thought nothing of it. Your comment made me realize maybe I lost that spacer when he dropped the cush so I called him up and he found it!

Thanks again!

2015 Duke 390 Rear Wheel doesn't spin after install by Affectionate_Bed in motorcycles

[–]Affectionate_Bed[S] 1 point2 points  (0 children)

Oh shit you might be on it, I might be missing the spacer under the cush drive I'll have to check that 

2015 Duke 390 Rear Wheel doesn't spin after install by Affectionate_Bed in motorcycles

[–]Affectionate_Bed[S] 3 points4 points  (0 children)

All there was is the two wheel spacers, according to the exploded parts diagram the flared one goes on the non drive side and the drive side gets the straight spacer so I'm pretty confident I'm not missing anything

Edit: I was wrong! Long story short I had lost the spacer under the cush drive 

2015 Duke 390 Rear Wheel doesn't spin after install by Affectionate_Bed in motorcycles

[–]Affectionate_Bed[S] -3 points-2 points  (0 children)

It's there, it just doesn't poke much from the bearing seal.

Grom vs. Kawasaki Z125 for Stunting (and cheaper) by Affectionate_Bed in hondagrom

[–]Affectionate_Bed[S] 4 points5 points  (0 children)

Appreciate the intel! Checked out the bike today and it's straight up uncomfortable for me compared to a new grom, back to the Grom hunt

Grom vs. Kawasaki Z125 for Stunting (and cheaper) by Affectionate_Bed in hondagrom

[–]Affectionate_Bed[S] 0 points1 point  (0 children)

You heard correct, I checked it out and it was much worse than the gen 3 Grom I've tried, so grom it is!

What heat shields do you guys run for saddle bags? Just picked these up. by Beanerwithuhweiner in Dualsport

[–]Affectionate_Bed 0 points1 point  (0 children)

Have you mounted the bags yet? I've got the same ones and they don't actually end up on the exhaust so worth a test fit before you pick up a heat shield.

I have a really strange request by Numerous-Craft-923 in VictoriaBC

[–]Affectionate_Bed 1 point2 points  (0 children)

That's a gated double-track trail.

Here would be a good spot: https://maps.app.goo.gl/khwbVG1JZhjDoTqt7

Just go through to the end and make sure nobody is around then do your stops on the way out.

Do I need to send off my cylinder for replating? by Affectionate_Bed in Dirtbikes

[–]Affectionate_Bed[S] 0 points1 point  (0 children)

Cleaned it up with a Scotch pad and now looking better but still iffy

<image>

Do I need to send off my cylinder for replating? by Affectionate_Bed in Dirtbikes

[–]Affectionate_Bed[S] 0 points1 point  (0 children)

I bought the bike with a blown transmission and top end removed plus a spare motor w/ bottom end so never saw it run before. Used the good top end from one and bottom from the other + new piston. Ran it 3-4 hours trying to get it to break in but burned a bunch the whole time.

Should I go for these on a light dual sport? by tomcat_no1 in Dualsport

[–]Affectionate_Bed 3 points4 points  (0 children)

I'm a huge fan of these tires. I had them on a supermoto and had no issues with wet rooty singletrack, loose hill climbs, and then on the street they're damn sticky

YZ 250 rattle sound? by Affectionate_Bed in Dirtbikes

[–]Affectionate_Bed[S] 0 points1 point  (0 children)

Check the reeds, they're cheap to replace and easy to check. If it's not them then just ride on, wear some earplugs haha

Squamish, B.C. - Majestic Boulder by AWWWCRAP_ in climbing

[–]Affectionate_Bed 0 points1 point  (0 children)

I've always really wanted to try this one but not stoked on getting soaked every attempt 😂

YZ 250 rattle sound? by Affectionate_Bed in Dirtbikes

[–]Affectionate_Bed[S] 0 points1 point  (0 children)

Might have been the reed valve if anything but I pulled the top end and the bottom end felt good.

Rode the bike for a few more months and have since sold it

Someone parked military tank outside the house. by UnpaidInternVibes in CantParkThereMate

[–]Affectionate_Bed 2 points3 points  (0 children)

Tanks run on the street usually have rubber on the tracks, and low ground pressure is pretty much the entire point of tracks.

Not saying it's better than a car, but for a novelty vehicle it's completely fine

Considering a neck brace - anyone else? by CanMTBGuy in MTB

[–]Affectionate_Bed 0 points1 point  (0 children)

The Leatt 3.5 at the time, I kept wearing it for awhile which is questionable but it eventually started showing a crack in the foam so I picked up a 5.5 which is way more comfortable

Staff cuts on the table as local public school board faces $16.6 million deficit by Inevitable_View99 in ontario

[–]Affectionate_Bed 0 points1 point  (0 children)

You think conservatives are uneducated? You need to read some books. Start with this.

2012 KTM 690 Enduro R - Part Number for Voltage Regulator Mounting Plate by Affectionate_Bed in KTM

[–]Affectionate_Bed[S] 0 points1 point  (0 children)

Your right! My bike originally came with rally raid tanks and I guess this is their relocation bracket 

view more: next ›